Aerotech Steelfiber 80 CW Graphite Iron Shaft (Sets) - .355"

Aerotech Steelfiber 80 CW Graphite Iron Shaft (Sets) - .355"


80 CW R Flex - 36.5"-40" (Set of 8), .355" tip (85gm) 3B2H
$391.99
In Stock
80 CW S Flex - 36.5"-40" (Set of 8), .355" tip (85gm) 4B2H
$391.99
In Stock
80 CW R Flex - 36.5" Individual Wedge, .355" tip (85gm) 3B2H
$48.99
Backordered
80 CW S Flex - 36.5" Individual Wedge, .355" tip (85gm) 4B2H
$48.99
Backordered
Pureing 
1-3 $15.50
4+ $13.50
Tip & Butt Trimming
$4.95
Tip Prepping
$2.95

Aerotech Steelfiber 80 CW Graphite Iron Shaft (Sets) - .355"

Aerotech SteelFiber 85 CW Graphite Iron Shafts.

Features:
  • Steel fibers integrated into graphite composite produces a shaft more consistent in flex, geometry and straightness than steel iron shafts
  • Low torque for better control
  • Designed for players looking to gain distance without sacrificing control.
  • Tapered .355" tip diameter
  • Sold in sets only (R & S flex)

Trimming Instructions

Aerotech SteelFiber 80 CW Shaft Specifications

Aerotech Steelfiber 80 CW Graphite Iron Shafts - .355" is rated 4.5 out of 5 by 2.
Rated 4 out of 5 by from great for controlled distance I put this shaft in my Ping S56 wedge. Goes about 5 yards longer than steel shafts..goes straight too..only problem is around the greens..if you don't spend time learning the feel of the flex, it's tough to cozy up to the pin...the next heavy shaft in this line would be better for short distance control..Stressdoc
Date published: 2015-10-25
Rated 5 out of 5 by from Great shafts I had Rifle Project X 5.0 shafts in my irons. With turning 70, I decided to re-shaft my irons with Areotech Steelfiber 80 Graphite shafts. I now hit my irons farther, more accurately. Great shafts!
Date published: 2014-07-12
  • 2016-07-24T07:49CST
  • bvseo_cps, prod_bvrr, vn_cps_3.3.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_2
  • loc_en_US, sid_AT0019I, PRD, sort_relevancy
  • clientName_golfworks

i have Ping G25 irons 4 thru wedge and gap wedge, total 8 what do i need to know before ordering shafts

Asked by: jim
The Aerotech Steelfiber shafts are packagaed in sets of 3-PW only. to get a set for a 4 through Gap wedges set they will need to be special ordered. Customer Service can help you with this special order. You can contact them at 1-800-848-8358 or by email at golfworks@golfworks.com.
Answered by: JimY
Date published: 2016-04-04

Have Apex Pro 3-gap wedge. Currently KBS c taper 120 stiff. Driver swing speed 100. Hdcp is 1. 56 yrs old smooth tempo. Looking for more iron distance without loss of accuracy. What aerotech shaft or other shaft would you recommend?

Asked by: Aazee
One way to potentially add distance to irons is to go to a lighter weight shaft. SteelFiber has weight options from the mid 70's to 110 grams. As a 1 handicap you obviously have a sense for how you want the clubs to feel, so the biggest hurdle in finding a lighter weight option is to find one that will still have a feel that you prefer. Unfortunately, the only real way to determine if a shaft change is going to produce the desired results is to try it. Concentrate on weight reduction if distance is the primary concern. Rarely will there be enough difference in the dynamic bend profile between shafts that will result in any measurable distance gains. Combine a lighter weight shaft with a reduction of loft, and the chances of gaining a few yards will be greater.
Answered by: GW2002
Date published: 2016-04-01

I have Ping S56 irons..how does a 95gram shaft vs. 80gram shaft change the swingweight?

Asked by: Stressdr
The general rule of thumb is that a 9 gram change of shaft weight is equal to 1 swingweight, assuming the balance points of the shaft are the same. The balance points in the Steel Fiber 80 and 95 CW shafts are the same so the 80 should be about 1 swingweight lighter then the 95.
Answered by: JimY
Date published: 2015-09-28

How much would it cost for 4-9 iron shafts. I don't need a complete set. Thanks!

Asked by: TeeTown
You would need to contact Customer Service to place a special order for just the 4-9 iron shafts. The .355" Constant weight taper tip Steel Fiber shafts are only sold in sets of 3-PW. Wedge shafts are the only individual shafts that they make available. You can contact Customer Service at 1-800-848-8358 or by email at golfworks@golfworks.com
Answered by: JimY
Date published: 2015-09-14

Can aerotech 80 iron taper tip shafts be purchased in individual shaft lenghs, such as for 5-9 iron?

Asked by: Joe day
With The Aerotech Steel Fiber taper tip shafts they are sold in sets of 3-PW only. If you would like a set of 5 - 9 iron those would have to be special ordered, which we can do. Contact Customer Service and they can special order these shafts for you. 1-800-848-8358
Answered by: JimY
Date published: 2015-08-24

Do you only trim the butt for parrallel TIP STEEL FIBER SHAFTS?

Asked by: bond
You would do trimming from both the tip and the butt with the parallel tip Steel Fiber shafts. They follow trim code IR21 at this link. http://www.golfworks.com/images/art/shaft_trim_inst.pdf
Answered by: JimY
Date published: 2015-07-27

I need one Aerotech I80 stiff shaft for a Titleist 695 CB 8 iron. What will that cost me?

Asked by: Strohmoose
We do not have individual replacement shafts for the Aerotech .355" taper tip shafts. This will need to be a special order. It would be best for you to contact Customer Service and they will be glad to work with you on this order. You can contact them at golfworks@golfworks.com or by calling 1-800-848-8358.
Answered by: JimY
Date published: 2015-07-22

I am reshafting a set of Ping G10 Irons, I believe the .355 tip is correct. Can you Verify that please

Asked by: 4Rick
Yes Ping G10 irons are .355" taper tips. All Ping irons are .355" taper tip, both steel and graphite. We have these links on our web site that can help you with this type of information. http://www.golfworks.com/article.asp_Q_ai_E_376 http://www.golfworks.com/images/art/Ping.pdf
Answered by: JimY
Date published: 2015-07-21
  • 2016-07-24T07:49CST
  • bvseo_cps, prod_bvqa, vn_cps_3.3.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_12
  • loc_en_US, sid_AT0019I, PRD, sort_recentAnswersFirst
  • clientName_golfworks