Aldila NV Graphite Wood Shaft

Aldila NV Graphite Wood Shaft


55A Flex - 335 tip (54g) 2B2M
$44.99
In Stock
55R Flex - 335 tip (56g) 3B2M
$44.99
In Stock
55S Flex - 335 tip (57g) 4B1M
$44.99
In Stock
55X Flex - 335 tip (58g) 5B1M
$44.99
In Stock
65R Flex - 335 tip (67g) 3B2M
$44.99
In Stock
65S Flex - 335 tip (67g) 4B2M
$44.99
In Stock
65X Flex - 335 tip (68g) 5B2M
$44.99
In Stock
75R Flex - 335 tip (78g) 3B1H
$44.99
In Stock
75S Flex - 335 tip (78g) 4B1H
$44.99
In Stock
75X Flex - 335 tip (78g) 5B1H
$44.99
In Stock
65R Flex - 350 tip (67g) 3B2M
$44.99
In Stock
65S Flex - 350 tip (67g) 4B2M
$44.99
In Stock
65X Flex - 350 tip (68g) 5B2M
$44.99
Backordered
75R Flex - 350 tip (78g) 3B1H
$44.99
In Stock
75S Flex - 350 tip (78g) 4B1H
$44.99
In Stock
75X Flex - 350 tip (78g) 5B1H
$44.99
Backordered
Pureing 
1-3 $15.50
4+ $13.50
Tip & Butt Trimming
$4.95
Tip Prepping
$2.95

Aldila NV Graphite Wood Shaft

The Aldila NV graphite wood shaft provides the player with very uniform feel and consistent performance due to its constant taper wall thickness design.

  • .335" and .350" tip diameters available
  • Constant taper design to eliminate "dead spots" or inconsistent flex zones
  • Unmatched consistency throughout the NV line, regardless the shaft weight
  • Available in 55, 65, 75 or 85 Series

Trimming Instructions

Aldila NV Graphite Wood Shaft is rated 5.0 out of 5 by 3.
Rated 5 out of 5 by from Smoooooth!!! This is one smooth shaft. I purchased the 65X .335 for my Supertri a while back as the stock shaft felt like a wet noodle. I have a high swing speed coupled with a quick transition which really loads this shaft up well. It's just so responsive, that I can feel the clubheads presence throughout the swing. Nice medium to low launch and the ball just soars on a smooth arc with excellent roll out. I have since pulled the tour issue Project X out my Titleist 910D3 are re-tipped this shaft to fit. With all of the new models (shafts) that have been released, it's easy to see why Aldila hasn't discontinued this classic! Definitely one of the "best bang for your buck" shafts on the market!
Date published: 2012-11-23
Rated 5 out of 5 by from Great shaft I bought the Aldila NV green shaft to go in my R-15 driver. I had the shaft pured, trimmed and a new adaptor and taylormade grip installed. I have this shaft in a 7 wood and 9 wood and it's just right for me. I firmly believe in puring (spine align) the shaft. I got the new shaft, put it right in my R-15 and it hits great, also about 15 yards further. I will also get it for my R-15 3 wood.
Date published: 2016-02-09
Rated 5 out of 5 by from Consistent feel and results! I have been searching for a decent shaft for my TM M1. This shaft is perfect. Sacrificed some distance but gained complete control. I can shape a variety of shots and haven't been in trouble with this shaft.
Date published: 2016-04-25
  • y_2016, m_12, d_7, h_12
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_3
  • loc_en_US, sid_1205W, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

Using the .335 shaft in a head using a .350 shaft needs a shim. Where do I get the shim ? Would it be the .335 BB9048 adapter ? If I order the shaft do you send the adapter with it ?

Asked by: RodyMac
If you are using a Ping driver the BB9048 for the .335" shaft will shim your .335" shaft into the .350" hosel bore. The adapter does not come with the shaft order. You need to order it separately. http://www.golfworks.com/ping-i20-and-g-series-shaft-adaptors/p/BB9048/
Answered by: JimY
Date published: 2016-12-06

I have a Ping Driver head (G5) that needs a new shaft, but I am not sure what size tip to buy. A 335 or 350 ??

Asked by: RodyMac
The G5 driver used a .350" tip diameter shaft but there are very few .350" tip diameter shafts available these days. Use the BB9048 adapter, the one marked .335", and you can install any .335" tip diameter wood shaft that you would like.
Answered by: JimY
Date published: 2016-12-05

Do the shafts come with adapter for x hot 2

Asked by: Nickel
No you have to purchase the Callaway shaft adapter for the X2 Hot separately. The order code for the shaft adapter is CA0020. http://www.golfworks.com/callaway-advanced-opti-force-shaft-adaptor/p/CA0020/
Answered by: JimY
Date published: 2016-11-21

What is the difference between NSV and NS shafts?

Asked by: Chuck
The NVS is designed to produce a mid trajectory. The NV is designed to produce a low/mid trajectory. the NVS will play a little more flexible then the NV even in the same flex.
Answered by: JimY
Date published: 2016-11-11

I still play a Titleist 905R, one of the best drivers they made, it has a ALDILA 65-S and at times it feels like a R-FLEX, would a 75-S be a better choice if I wish to remain in a stiff flex ?

Asked by: PJMc
The 75 S from our testing did not test stiffer then the 65 S. So other then the increase in weight I am not sure that you would notice much difference.
Answered by: JimY
Date published: 2016-11-08

What is the kick point and torque of the Aldila AL202201 shaft?

Asked by: snozbalz
You can see all the specifications for this shaft at this link and scroll down the page to the specifications box. http://www.golfworks.com/aldila-nv-graphite-wood-shaft/p/1205W/ The A flex is a mid kick point with 3.9 degrees torque. The R flex is a mid kick point with 3.9 degrees torque. The S flex is a mid/high kick point with 3.9 degrees torque. The X flex is a mid/high kick point with 3.9 degrees torque.
Answered by: JimY
Date published: 2016-11-08

I am 75 years old. I normally score around 80 ... a stroke or two more and sometimes a stroke or two less. I guess my swing speed around 92 mph. What NV 65 green shaft would you recommend?

Asked by: Gerald
I would recommend the R flex for your swingspeed. It will likely be a little more forgiving for you on your off days.
Answered by: JimY
Date published: 2016-10-10

Are the tip trimming instructions the same with an adapter or without.

Asked by: GunBlom
Yes the shaft trimming instructions are the same with or without the shaft adaptor.
Answered by: JimY
Date published: 2016-09-12
  • 2016-12-08T08:09CST
  • bvseo_cps, prod_bvqa, vn_cps_3.4.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_48
  • loc_en_US, sid_1205W, PRD, sort_recentAnswersFirst
  • clientName_golfworks