Aldila NVS Graphite Wood Shafts

Aldila NVS Graphite Wood Shafts


55A Flex - 335 tip (54g) 2B2M
$44.99
In Stock
55R Flex - 335 tip (56g) 3B2M
$44.99
In Stock
55S Flex - 335 tip (57g) 4B2M
$44.99
In Stock
65R Flex - 335 tip (67g) 3B2M
$44.99
In Stock
65S Flex - 335 tip (68g) 4B2M
$44.99
In Stock
65R Flex - 350 tip (67g) 3B2M
$44.99
In Stock
65S Flex - 350 tip (68g) 4B2M
$44.99
In Stock
Pureing 
1-3 $15.50
4+ $13.50
Tip & Butt Trimming
$4.95
Tip Prepping
$2.95

Aldila NVS Graphite Wood Shafts

The Aldila NVS graphite wood shaft features a higher launch and all the same unmatched performance and incredible feel of the original NV shaft.

Features:
  • .335" and .350" tip diameters available
  • Constant taper design produces uniform feel and performance
  • A more responsive shaft tip for a higher ball flight
  • The most popular weight for high performance drivers
  • No "dead spots" or inconsistent flex zones

Trimming Instructions

Aldila NVS Graphite Wood Shafts is rated 4.75 out of 5 by 4.
Rated 5 out of 5 by from Did the trick. A few months back, I purchased a Taylor Made R15 TP 3 wood. My bag is filled with TP ironset and hybrids. I prefer these clubs because I want limited offset and I don't need help squaring the club at impact. I didn't care for the stock shaft that came in the 3 wood. It had a vague feel (had difficulty feeling exactly ehere my misses occurred on the club face) and it was definitely designed to lower the ball flight. This normally isn't an issue for me as I tend to flight the ball medium to high with all my clubs. The club head is also designed with a more forward center of gravity to keep ball flight down. This combination didn't work well for me from the fairway and rough. I purchased the Aldila NVS shaft and it gave me all the qualities I needed and noe I feel as confident from the ground as I had from the tee and I also like the height and carry more from the tee. Aldila shafts really suit my game. I now have one version in my driver, 3 wood, 3 hybrid and 4 hybrid.
Date published: 2016-07-18
Rated 5 out of 5 by from Good for me I find this to be the best overall shaft and value for my drivers and woods.
Date published: 2015-06-22
Rated 5 out of 5 by from Great Shaft I recently put a NVS 55 A shaft in my Ping G25 3 wood and I'm loving the results. Nice high ball flight with alittle draw. Perfect!
Date published: 2016-06-18
Rated 4 out of 5 by from Aldila NVS Shaft Best shafts for weekend warriors! If you are a low shot hitter, this shaft gives you elevation.
Date published: 2015-07-08
  • 2016-07-24T07:50CST
  • bvseo_cps, prod_bvrr, vn_cps_3.3.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_4
  • loc_en_US, sid_AL202202, PRD, sort_relevancy
  • clientName_golfworks

My name is Mike live in UK. Always had a Aldila shafts for my Driver and fairway woods( voodoo tour black and Trinity) my question is I always had 65R 335 tip shafts now I am going to try 75R 350 tip NVS is going to improve my game .

Asked by: Mike 252
The .350" tip size NVS will play stiffer in the tip then the .335" NVS tip size. The heavier shaft weight could either help or hurt. Generally most players will swing the heavier shaft slower and likely not hit it quite as far. If the heavier weight shaft fits your swing then it could give you more control and similar distance as you have had with the 65 gram weight shafts.
Answered by: JimY
Date published: 2016-07-22

Trimming instruction F for a 3 wood

Asked by: Mike
Trim code for the AL202201 is W18, which calls for 1" tip trim for a #3 wood, then trim to final playing length from the butt end.
Answered by: GW2002
Date published: 2016-07-05

I kind of like the Fujikura Motore Speeder stiff shaft that comes stock in Callaway drivers. Is the NVS 55 comparable at all?

Asked by: Chipper
I do not have any specific specifications from the Fujikura Motore Speeder S flex to be able to make a good comparison to the NVS 55. If the weight of the Fujikura is in the 50 gram weight range then the shafts will probably play pretty similar. Stock shafts generally play a little more flexible then normal and the NVS 55 does play a little more flexible then normal. The Fujikura EXS 5.0 (FK0071) could also be a good match to the stock shaft, again depending on the weight of the stock shaft.
Answered by: JimY
Date published: 2016-06-20

what are the kick points on these shafts

Asked by: roger
The shaft has a mid kick to help to provide the player with a mid-high flight. This can be relative to each player as most of the trajectory is based on the loft of the driver and attack angle of the swing.
Answered by: Brent Dill
Date published: 2016-06-16

I am looking to re-shaft a big bertha 2004 fairway wood. I think it has a .350 tip. Does this sound correct? is the NVS wood shaft for fairway woods?

Asked by: joker
Yes the 2004 Big Bertha Fairway woods are a .350" hosel bore. The NVS can make a good fairway wood shaft. You will need to use the BB9002 Callaway Adapter for reshafting this head with a .335" tip diameter shaft. http://www.golfworks.com/callaway-335-shaft-adaptor/p/BB9002/
Answered by: JimY
Date published: 2016-06-14

My father inlaw gave me a King Cobra F/Speed 5 wood with a light flex Mitsubishi Bassara shaft.  I am used to stiff shafts so I can't hit the darn club. What would be a recommended aldila NVS replacement for it?

Asked by: Angel
If you like the S flex then you would want the AL202202 which is available in both 55 and 65 gram weight shaft. The 65 sounds like it might be the better choice for you.
Answered by: JimY
Date published: 2016-05-13

Can you tell me if this shaft has a weak butt section for loading/unloading; comparing it to a Fujikura Pro 53 "R" flex. Thanks.

Asked by: Rudders
The NVS 55 R flex has a stiffer butt section the the Pro 53. Partly due to the larger butt diameter of the NVS at .615" compared to the .602 butt diameter of the Pro 53.
Answered by: JimY
Date published: 2016-05-04

I'm 70 years I shoots in the low to mid 80s I have a reg shaft I would like more distance Whats shaft should I use

Asked by: Wade
The Aldila NVS 55 could be a good choice. We recommned the R flex for swingspeeds in the 77 to 92 mph range. Below that the A flex could be a good choice. Another shaft I would recommend is the Grafalloy ProLaunch Blue 45 (TT0106). The same swingspeed ranges would apply to this shaft. http://www.golfworks.ca/grafalloy-prolaunch-blue-45-65-graphite-wood-shafts/p/TT0106/
Answered by: JimY
Date published: 2016-03-08
  • 2016-07-24T07:50CST
  • bvseo_cps, prod_bvqa, vn_cps_3.3.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_19
  • loc_en_US, sid_AL202202, PRD, sort_recentAnswersFirst
  • clientName_golfworks