Aldila Rip Alpha 6/7 Graphite Wood Shafts

Aldila Rip Alpha 6/7 Graphite Wood Shafts


6R Flex 46" - .335 tip (62g) 3B1M
$159.99
In Stock
6S Flex 46" - .335 tip (63g) 4B1H
$159.99
In Stock
6X Flex 46" - .335 tip (66g) 5B1H
$159.99
In Stock
7S Flex 46" - .335 tip (74g) 4B1H
$159.99
In Stock
7X Flex 46" - .335 tip (77g) 5B1H
$159.99
In Stock
Pureing 
1-3 $15.50
4+ $13.50
Tip & Butt Trimming
$4.95
Tip Prepping
$2.95

Aldila Rip Alpha 6/7 Graphite Wood Shafts

Features:
  • RIP is a revolutionary shaft with optimum flex and torque characteristics with incredible feel.
  • RIP Technology™ provides for a shaft with lower torque, increased tip stability, and better tip stiffness .

Trimming Instructions

ALDILA Shaft Specifications

Aldila Rip Alpha 6/7 Graphite Wood Shafts is rated 5.0 out of 5 by 2.
Rated 5 out of 5 by from Very well behaved! I put this shaft into my Titleist 910-D2 and immediately saw a huge improvement over the stock Diamana. Much lower trajectory when I wanted it with more roll out. Plenty of height and carry when I hit it more on the upswing. Incredibly accurate. Wish I was 20 years younger so I could really take advantage of it! Great shaft.
Date published: 2012-08-04
Rated 5 out of 5 by from Hands Down Best I have used every revolutionary shaft in the last 10 years beginning with the Grafalloy ProLite. This RIP shaft is by far the longest most accurate shaft I have ever played. Currently paired with Titleist 910D2 driver.
Date published: 2011-10-28
  • 2016-10-01T07:50CST
  • bvseo_cps, prod_bvrr, vn_cps_3.4.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_2
  • loc_en_US, sid_AL0031, PRD, sort_relevancy
  • clientName_golfworks

looking for a shaft that will go on cobra amp 3 wood Grey shaft rip 55c

Asked by: Ted
We have the Aldila RIP Phenom 50 (AL0034) in a 50 gram weight. It could match well with the Cobra AMP 3 wood. http://www.golfworks.com/aldila-rip-phenom-graphite-wood-shafts/p/AL0034/
Answered by: JimY
Date published: 2016-09-28

Will this rip alpha lower my ball flight.  Can I get it with. A g30 driver tip and Farrell assembled

Asked by: Lee
The RIP Alpha is designed to produce a low/mid trajectory. If you are comparing this to the stock shaft in the G30 I would expect the Alpha to produce a lower ball flight. We can install the shaft adaptor for the G30. You would need the PGC002 Ping Shaft Adaptor. http://www.golfworks.com/ping-g30-series-shaft-adaptor/p/PGC002/
Answered by: JimY
Date published: 2016-07-21

Can you install a titleist sure fit tip on the 60 RIP stiff shaft?

Asked by: Golfer25
We do not have the Titleist shaft adapter but do offer an aftermarket shaft adapter for the Titleist that will fit the RIP S flex shaft. We can install this shaft adapter for you. http://www.golfworks.com/the-golfworks-910-913-915-straight-fit-adaptor/p/BB9058/
Answered by: JimY
Date published: 2016-06-27

MPF/3B2M or 3B1M what is the difference? same flex

Asked by: chucky5
The "2" would indicate a medium trajectory and the "1" would indicate a lower trajectory.
Answered by: GW2002
Date published: 2016-05-19

Can I reduce the length of Aldila Rip Alpha from the tip (I believe thats called tipping) by one inch. Also, I read that would increase the stiffness slightly. i.e.. a regular flex to something between a regular and stiff.

Asked by: Tom W
Yes you could tip trim this shaft. It has a 3" parallel tip length and it is a good rule of thumb to leave at least a 1.5" parallel tip length for proper shaft installation. With graphite shafts tipping 1" is a full flex change. Half a flex would be 1/2" tip trimming to get in between an R and S flex.
Answered by: JimY
Date published: 2016-02-05

I have a Adila RIP @80. 2.0 xstiff in my Ping G30 fairway. Do you still carry this shaft or if not, what is comparable? Thanks

Asked by: Foe Riehl
We do not have the RIP Alpha in an 80 gram weight shaft. We do have the 70 gram weight RIP Alpha. It would be your closest replacement. We do not stock any 80 gram weight wood shafts these days.
Answered by: JimY
Date published: 2016-02-04

I have an old Taylor Made R9 Super Deep TP.  My shaft needs to be replaced.  I had the Aldila RIP shaft in a s flex and it was half inch longer than standard.  Can you put that combination together for me with the shaft sleeve so it is ready to play?

Asked by: Paul
Yes we can put this combination together for you. If you are ordering on line you will need to place an order for the shaft and adaptor. If we will be installing the grip place the order for the grip as well. At Checkout in the Special Notes box put your instructions for the adaptor installation. Tell us the length, and we would prefer a specific length number instead of half inch over standard. Tell us the which setting on the adaptor you would like the shaft installed to. If we are installing a grip and it will be other then standard size tell us the size you would like. http://www.golfworks.com/product.asp_Q_pn_E_TM0016
Answered by: JimY
Date published: 2016-01-20

Can you put a Callaway x hot tip and a tour velvet grip on this shaft? Also trim to 45".

Asked by: nevil
Yes we can install the tip, grip and trim to a 45" finished length. You could call in your order to 1-800-848-8358 or if you order on line you would order the shaft, grip and adaptor and at Checkout in the Special Notes box tell us you would like the adaptor and grip installed and cut to 45". Also tell us which setting on the adaptor you would like the shaft installed to.
Answered by: JimY
Date published: 2015-09-28
  • 2016-10-01T07:46CST
  • bvseo_cps, prod_bvqa, vn_cps_3.4.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_9
  • loc_en_US, sid_AL0031, PRD, sort_recentAnswersFirst
  • clientName_golfworks