Aluminum Golf Shaft Extensions

Aluminum Golf Shaft Extensions


Aluminum Shaft Extension for Steel Shafts
$0.99
In Stock

Aluminum Golf Shaft Extensions

The GolfWorks Aluminum Shaft Extensions for the steel golf shafts have been re-designed to achieve a much tighter size tolerance. The Aluminum Extensions are designed to perfectly fit most steel shafts with a .600 butt diameter but can be sanded to fit shafts with slightly smaller butt diameters if needed. Durable and the 3 extended length can be easily cut to finished length using the GolfWorks Mini Saw (GW1080).

Aluminum Golf Shaft Extensions is rated 4.25 out of 5 by 8.
Rated 5 out of 5 by from Perfect extenders I bought the golf extenders last month. They arrived within three days. Fit the shafts perfectly as advertised. Well machined and good quality. I'm in New Zealand and the distance played no role in the excellent service I received. Strongly recommended.
Date published: 2016-05-19
Rated 4 out of 5 by from Inexpensive and they work I bought these to lengthen my irons a little bit. Much easier than reshafting and a whole lot cheaper! A little epoxy, trim to length, regrip, and wow! New irons!
Date published: 2015-07-10
Rated 1 out of 5 by from Wrong product Bought these to extend my putter shaft, but the product did not have a description that it is only for club shafts. Useless.
Date published: 2016-06-07
Rated 5 out of 5 by from 2 aluminum extensions Purchased last week, super fast shipping. First time installation, absolute perfect fit for extending 2 wedges
Date published: 2016-04-24
Rated 5 out of 5 by from Greta extenders I bought these to extend some of the shafts on a set of clubs, worked great.
Date published: 2016-04-23
Rated 4 out of 5 by from Work Great - Tight Fit! They work but they are a tight fit and I had to grind them down a bit!
Date published: 2016-06-20
Rated 5 out of 5 by from Quality product. Easy to use and perfect fit. I will use these over steel extensions.
Date published: 2016-01-09
Rated 5 out of 5 by from Great Product Good Price Needed to extend a set of iron the extensions fit the bill.
Date published: 2016-01-03
  • 2016-07-24T07:50CST
  • bvseo_cps, prod_bvrr, vn_cps_3.3.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_8
  • loc_en_US, sid_GW0104, PRD, sort_relevancy
  • clientName_golfworks

will these shaft extensions fit a titielist AP1 steel shaft. You talk .600 but that's greek to me but maybe most shafts are 600?

Asked by: Sandy
Yes these will fit your Titleist AP1 steel shafted irons. If they are snug when dry fitting you can sand them slightly for a better fit.
Answered by: Brent Dill
Date published: 2016-07-20

I am a golf tech at Sporting Goods  store; I have had a number of tall 6'-6" + new golfers visiting the store and they have requested fittiings for golf clubs. Is there a limit as to how much extension is permitted for tournament play. Six ext. required

Asked by: Ken
There is no limit as to the length of an extension by the USGA. The maximum allowable length of a golf club is 48". I wouldn't recommend extending a golf club more than 2" with a steel or aluminum extension due to the possibility of breakage.
Answered by: Admin
Date published: 2016-04-26

Do you have in stock butt diameter .560

Asked by: Lorrie16
No we do not stock the Aluminum Extension for a .560" butt diameter shaft. We have the S56 (.560") extension for .560" butt diameter steel shafts. http://www.golfworks.com/steel-shaft-butt-extensions/p/S60/
Answered by: JimY
Date published: 2016-03-25

How do these compare to the steel extensions in terms of additional singweight?

Asked by: birddog
About the same. The aluminum extensions do not weight much less then the steel extensions because the aluminum extensions are thicker to maintain structural strength. I have always found that with most extension no matter what material they are that adding 1/2" of club length the swingweight will increase 2 to 2.5 swingweights. It is a factor of length and and the post of the extension. The longer and heavier the post the less the swingweight change because it is adding weight closer to the balance point of the swingweight scale.
Answered by: JimY
Date published: 2016-02-29

I need some shaft extenders. Are the driver & iron extenders the same?

Asked by: wjgdawg
To be able to properly help you get the correct size adaptor we would need to know what shafts you have. Steel shafts will use different size extensions then graphite shafts. With steel shafts we can use the outside diameter at the grip end of the shaft for the correct extension size. With graphite shaft we need to know the inside diameter at the grip end to get the correct size. Graphite shaft wall thicknesses vary more then steel because of the larger shaft weight range in graphite shafts. If you can tell us the brand and model of shafts you need extensions for there is a chance we will know which ones you will need.
Answered by: JimY
Date published: 2016-02-25

How long are these?

Asked by: CToneputt
The entire extension measures 4.5" long and the post that goes into the butt end of the shaft measures 1.5" long.
Answered by: JimY
Date published: 2015-10-21

What is the inside diameter that these extenders will fit? Irons or Woods?

Asked by: TrailBoss
The Aluminum extensions are designed to fit .600" butt diameter steel shaft whether that be irons or woods. The are not sized for graphite shafts. The post size is approximately .550".
Answered by: JimY
Date published: 2015-09-14

The butt diameter is .600 - - what is the tip diameter ?

Asked by: Bilbo
The post measures .551".
Answered by: JimY
Date published: 2015-06-22
  • 2016-07-24T07:44CST
  • bvseo_cps, prod_bvqa, vn_cps_3.3.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_11
  • loc_en_US, sid_GW0104, PRD, sort_recentAnswersFirst
  • clientName_golfworks