|
Special Offers
|
Ordering from a mailing?
Enter a source or offer code to receive your special offer.
|
Email 
|
| Sign up to receive exclusive special offer emails from The GolfWorks! |
| Sign Up Now |
|
Maltby Clubmaking Academy
GolfWorks - Maltby Clubmaking Academy
|
Maltby Clubmaking Academy Canada Information Center |
|
Master your Clubmaking
The GolfWorks Canada proudly presents our 2009 state-of-the-art clubmaking program. Golf enthusiasts and clubmakers alike have traveled from all over the world to take one of our exclusive classes!
|
- Fitting & Assembly
- Fitting, Assembly & Repair
- Adv. Shaft Technology & Professional Clubfitting
- Home Study
| Fitting and Assembly - 2 Day |
$140 plus GST |
Due to the high demand for The Golfworks Schools, and because there are many people that lack the time to commit to a full week school, we have designed a rewarding two-day course on Golf Club Fitting and Assembly. This two day school is an introduction to Golf Club Fitting and Assembly. It is designed for the beginner and briefly covers all topics involved with golf club fitting and assembly. Each student will go through the fitting process and then build three golf clubs to their evaluation results. The procedures for assembling and repairing golf clubs will include everything from a hobbyist building clubs at home to a large volume repair shop. This course discusses theory while being very hands on.
|
FITTING
How mass and dimensional properties affect golf club performance
Loft, lie and golf club length
Swingweight and total weight
Shaft flex, materials, designs and patterns
Grip size, materials, models
Set make-up
|
ASSEMBLY
Using assembly equipment
How to finish ferrules
How to size and install golf grips
Achieving proper swingweights
Expert "Tricks of the Trade"
Assemble a graphite-shafted driver, steel-shafted 6 iron and steel-shafted putter
|
MAR.
3/26-3/27 |
MAY
5/7-5/8 |
SEPT.
9/24-9/25 |
NOV.
11/5-11/6 |
|
|
| Fitting, Assembly and Repair - 4 Day |
$450 plus GST |
The most comprehensive training program available in clubmaking today. This course has set the standard for complete clubmaking and repair instruction for two decades!This is an intensive four day program designed to cover the design principles of golf club components, modern golf club fitting and assembly techniques of custom club making.
This presentation involves lectures, textbook, team exercises, practical demonstrations, personal swing testing and club fitting. Each student will go through a complete personal fitting. All aspects of the fitting process will be discussed in detail and then three clubs will be assembled to their specifications. Similar to the 2 day school, the assembly procedures will include everything from a hobbyist at home to a large volume shop but with more detail. While being very detailed to theory and technology it is still hands on.
|
FITTING
How mass and dimensional properties affect golf club performance
Loft, lie and club length
Swingweight and total weight
Shaft flex, materials, designs and patterns
Grip size, materials, models
Set make-up
|
|
ASSEMBLY
Using assembly equipment
How to speed turn ferrules
How to install a golf grip
Achieving proper swingweights
Assembly using frequency analyzer
Expert "Tricks of the Trade"
Measuring golf club specifications
|
|
REPAIR
Stainless steel iron refinishing
Reshafting irons and metal woods
Measuring scorelines
Removing and installing golf gripss
Short-cuts, timesavers and solutions
Adjusting loft and lie angle
Ferrule finishing
|
APR.
4/6-4/9 |
MAY
5/12-5/15 |
OCT.
10/19-10/22 |
NOV.
11/16-11/19 |
|
|
| Advanced Shaft Technology & Professional Clubfitting- 4 Day |
$590 plus GST |
Learn a golf shaft's role in performance, shaft terminology and the manufacturing process for both steel and graphite.This school is for the Golf Club Fitter who wants to take their knowledge and experience to the next level. The course discusses all the components of a golf club but gets into great detail with the golf shaft. Each student will assemble a frequency matched set of irons and the cost is included in the tuition fee. This course assumes the students have an understanding in Clubmaking and it is recommended that you have some prior training in Club Fitting.
|
Learn how golf shafts are manufactured, tested and evaluated
Learn key elements in golf shaft performance
OEM vs. Aftermarket golf shafts
Learn how to use a frequency machine
Learn how to profile test golf shafts
Learn how to frequency match golf shafts
|
It is recommended that each student has attended the Fitting, Assembly and Repair school, or another qualified course.
| Home Study - Self Paced |
$350 plus GST |
If you are too busy to attend a school at our Ottawa location this is the right school for you. The course covers Golf Club Design, Fitting and Assembly. Your tuition covers a manual, textbook and components to assemble three clubs required to complete the course.
|
You will learn the critical aspects of clubmaking
You will assemble a wood, iron and putter and have them evaluated by our professional teaching instructor
Our professional teaching instructor is available to answer any of your questions
|
|
BACKGROUND
The GolfWorks has been conducting professional golf club repair, fitting and assembly schools since 1982. We have hosted thousands of students from all over the world. Unlike other companies who teach club repair and actually repair very few clubs, we repair thousands of clubs yearly. Among the people who have placed faith in us to provide them with the knowledge of golf club repair, fitting and assembly currently work for companies like Callaway, Titleist, Nike, True Temper, UST, Golf Galaxy, Dick's Sporting Goods and more.
 Our premier technical experts provide you with the most comprehensive clubmaking instruction offered in the industry today. Our classes qualify for the PGA and LPGA Continuing Education Programs. The academys instruction manuals are written by Ralph Maltby, who is the leading authority on club design, fitting, and repair.
Hundreds of golf professionals from the PGA of America have also attended our schools. Why? Because the teaching manuals used in our schools are also used by the PGA of America in their seminars and workshops. In fact, many golf professionals choose to supplement their PGA-based education by visiting the source of golf club repair, fitting and assembly.
HOW TO ATTEND
Registering for a GolfWorks Clubmaking Academy program is as simple as picking up the phone. Just call our toll-free number 1-800-387-5331 and request a school packet. We will send a complete brochure on all four programs, as well as an application for attendance.
Space for these schools is limited - please sign up as early as possible to avoid missing out! Fill out the application and return it to The GolfWorks. Our staff will contact you with the date of your class and any other necessary details.
Registration Form (PDF)
School Map w/Hotel Accomadations (PDF)
For additional information you can also contact us by fax at 1-800-668-2188 or by email at support@golfworkscanada.com.
GolfWorks USA Clubmaking Schools
| GolfWorks Instructional Books have been chosen by the Professional Golfers Association of America for instruction at their own schools. |
| The Maltby Clubmaking Academy has taught over 12,000 students from around the world during its 27 years of existence. |
| The faculty comprises over 80 years combined experience in clubmaking, clubhead design and manufacturing. |
| The Maltby Clubmaking Academy has taught hundreds of well-known clubmaking, golf and industry professionals. |
| The Maltby Clubmaking Academy is the world's foremost authority on golf equipment and repair.. |
| The GolfWorks offers the most complete catalog of golf clubmaking instructional books and videos in the industry. |
| The Maltby Clubmaking Academy offers the industry's only accredited Home Study Clubmaking schools |
| "The information covered in class has already come into play here in my shop, and in my own game as well. The GolfWorks has always been a great company to order from and I will continue to tell others of the great experience I had at your facility." - S. Mullenn |
| "I enjoyed the hands-on approach and being able to put the techniques we learned to use. The equipment was very easy to use." - D. Klein |
|
|
