Golf Club Services and Repairs

We eliminate hours from your clubmaking time by preparing your shafts for immediate assembly. We tip trim unitized shafts to manufacturers recommendations. For steel shafts, we abrade the tips. For graphite shafts, we remove the polyurethane coating. When you receive your shaft, all you need to do is mix epoxy, install and align it.

Full Metal Wood Refinishing - GolfWorks has years of experience refinishing all brands of metal woods. As the finish of the metal woods change, our repair department is quick to accommodate to many of the new designs, offering you the highest quality work available on the market today.

• Strip Paint
• Remove Scatches / Dings (Depth of flaws may limit removal)
• Finish Un-Painted Areas (Polishing, Sandblasting, Satin)
• Replace Finish w/ High Quality Two-Part Paint
• Paintfill All Engravings

Full Finish Note: We attempt to color match original finishes as closely as possible. An exact match cannot be guaranteed. Face lines that are not engraved will be lost during this process.

Spot Metal Wood Refinishing - This process is designed to refinish a golf club without stripping the clubhead completely. The finish will cover blemishes (i.e. ball marks, etc.).

• Condition Golf Clubhead to Receive Paint
• Face/Sole Areas are Cleaned (Polishing, Sandblasting, Satin)
• Decals are Saved (Golf Clubhead is NOT stripped to bare metal)
• Replace Finish w/ High Quality Two-Part Paint
• Paintfill All Engravings

Spot Finish Note: Some colors are not available in this process. Golf clubs may vary in the chemical make-up of their paint. Therefore, new paint may not adhere to original paint. Golf clubs in this category will need a full refinish. Soles and faces are lightly resurfaced.

Let the Maltby Expert Repair Technicians make your irons look as good as new. The GolfWorks Iron Repair Department has been refinishing iron clubheads for a combined 50 years and has refinished golf clubs for customers worldwide.

• Remove Nicks and Dings (depth of flaws may limit removal)
• Sandblast Face
• Paintfill Engravings (Red, Black or as specified)

NOTE: For shafted golf clubheads add $5.95 for each clubhead that requires golf shaft extraction and re-assembly.

Let the Maltby Expert Repair Technicians make your putters look as good as new. The GolfWorks Iron Repair Department has been refinishing iron clubheads for a combined 50 years and has refinished golf clubs for customers worldwide.

• Remove Nicks and Dings (depth of flaws may limit removal)
• Sandblast Face
• Paintfill Engravings (Red, Black or as specified)

NOTE: For shafted putters add $5.95 for each clubhead that requires golf shaft extraction and re-assembly.

We regrip your golf clubs with the golf grip of your choice. To order: Add $4.50 per golf club to the price of any golf grip in this catalog, and specify which grip you want.

Select a golf shaft, note the flex and length desired. Indicate the style and size of golf grip you would like us to install. We will remove your existing shaft, install a new shaft and a new grip selected from this catalog. Note: We can also rebore your iron clubheads or wooden clubheads to accommodate a larger parallel-tip shaft. We cannot re-bore metal wood clubheads. To order: Add $19.95 to the catalog price of the golf shaft and grip you choose. Add $9.95 to rebore your iron clubhead from .355" taper to .370" parallel tip (if needed). Assembly refers to assembly (to your specifications) of components. (An additional $5.95 charge is required for bore-thru heads and woods that require special adapters).

SERVICE TYPE Loft and Lie Adjustments Change Swingweight Change Golf Club Length Remove Broken Golf Shaft (inside hosel) Reset Golf Shaft / Tighten Loose Clubhead Ream / Bore Hosel Putter Shaft Custom Bend Remove Rattle in Clubhead or Golf Shaft Re-Whip

REPAIR CODE # SLL CSWT CCL REMV RSET RIHB SBEN RATL RWWD

PRICE (USD) $4.95 $9.95 $10.95 $10.95 $9.95 $9.95 $5.95 $14.95 $9.95

The GolfWorks offers precision milling of Pre-2010 USGA conforming Square and "V" grooves for your iron clubheads. Re-grooving will improve control and direction in your shots, lowering your scores! Iron groove restoration for the new 2010 and beyond USGA groove is not currently available.

Bring those older classics back to life - GolfWorks expertly repairs wooden clubheads and also offers a complete assortment of alterations.

• Tightening the face insert or, if necessary, installing a new insert
• Tightening the soleplate
• Repair any wear and chipping on the club head's face
• Recut the scoring lines
• Stain and Refinish