AXE XCaliber 6 Graphite Wood Shafts

AXE XCaliber 6 Graphite Wood Shafts


AXE, XCaliber 6 A Flex - 335" tip (60g) 2B2M -
$39.99
In Stock
AXE, XCaliber 6 R Flex - 335" tip (62g) 3B2M -
$39.99
Backordered
AXE, XCaliber 6 S Flex - 335" tip (64g) 4B2M -
$39.99
In Stock
Pureing 
1-3 $15.50
4+ $13.50
Tip & Butt Trimming
$4.95
Tip Prepping
$2.95

AXE XCaliber 6 Graphite Wood Shafts

The Arthur Xtreme Xcaliber 6 Graphite Wood Shaft offers a mid / high launch angle with less spin, maximizing distance.

Features:
  • .335 tip diameter
  • Designed utilizing new Ballistic Integrated Mechanics (BIM) flight software
  • Med stiff butt and lower section creates a med/high launch with less spin than the XCaliber 5

Trimming Instructions

Xcaliber 6 Graphite Golf Shaft Specifications

AXE XCaliber 6 Graphite Wood Shafts is rated 4.75 out of 5 by 4.
Rated 4 out of 5 by from Much improvement I have not had a chance to do a round yet, but after hitting a few on the range, the distance and height has significantly improved without trying to hit harder. All clubs require a rhythm but especially the driver. The feel is good. I will update soon.
Date published: 2016-08-01
Rated 5 out of 5 by from Well Kept Secret -Great performer1 I HAVE BEEN PLAYING THE XCALIBER IN MY DRIVER AND FAIRWAYS FOR A COUPLE YEARS NOW. A CONSISTANT PERFORMER FOR MY 85-90 MPH DRIVER SPEED. ITS ON PAR WITH HIGHER PRICED SHAFTS.
Date published: 2015-08-22
Rated 5 out of 5 by from Great shaft I put the R shaft in a SLDR and I gained about 10 yds over previous shafts including the stock shafts. Good stuff Robin!
Date published: 2015-07-25
Rated 5 out of 5 by from GREAT SHAFT GREAT SHAFT BEETER THEN I HOPE FOR ,I PUT IT ON A 14.5 FAIRWAY WOOD I AM 81 AND ITS GOOD FOR 200 YARDS TAKES ME BACK .
Date published: 2016-06-12
  • 2016-08-31T08:24CST
  • bvseo_cps, prod_bvrr, vn_cps_3.3.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_4
  • loc_en_US, sid_AS0019, PRD, sort_relevancy
  • clientName_golfworks

I just got my Tailor-made JetSpeed Driver shaft broken, can I fit this shaft on it? How can I get the hosel adaptor fit on it?

Asked by: Baule
The Jet Speed driver used a .350" tip diameter shaft. The Xcaliber 6 is a .335" tip diameter shaft. To use this shaft into the Jet Speed you will need to purchase the BB9065 adaptor or you would need to shim the .335" shaft to fit the .350" adaptor. You could use our SHIM15 for doing this. http://www.golfworks.com/product.asp?pn=BB9065 http://www.golfworks.com/product.asp_Q_pn_E_SHIM
Answered by: JimY
Date published: 2015-09-28
  • 2016-08-31T08:23CST
  • bvseo_cps, prod_bvqa, vn_cps_3.3.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_1
  • loc_en_US, sid_AS0019, PRD, sort_recentAnswersFirst
  • clientName_golfworks