AXE XCaliber Graphite Irons Shafts

AXE XCaliber Graphite Irons Shafts

AXE XCaliber Iron - A/L Flex - 370 tip (65g) 1B2M/2B2M
AXE XCaliber Iron - R Flex - 370 tip (75g) 3B2M
AXE XCaliber Iron - S Flex - 370 tip (85g) 4B2H
1-3 $15.50
4+ $13.50
Tip & Butt Trimming
Tip Prepping

AXE XCaliber Graphite Irons Shafts

The Arthur Xtreme Engineering Xcaliber graphite iron shaft features Zone Stiffness Technology (ZST) which helps golf shots get airborne without excessive spin.

  • .370" parallel tip diameter
  • Lowest balance point of any iron in the industry combined with a med/stiff lower section helps get shots airborne without excessive spin
  • At 15 cpm stiffer than the XCaliber Hybrid, easy to make a progressively stiffer set of clubs

Trimming Instructions

Arthur Xtreme Engineering Xcaliber Graphite Iron Shaft Specifications

AXE XCaliber Graphite Irons Shafts is rated 5.0 out of 5 by 8.
Rated 5 out of 5 by from as good as they get installed these in a full set of KZG forged irons, stiff flex, excellent results. Only other iron shaft that is comparable is SK Fiber and the Xcalliber has lower more boring flight.
Date published: 2013-07-09
Rated 5 out of 5 by from AXE XCaliber Graphite Irons Shafts I removed the TT steel shafts that came with the Maltby TE Forged iron package and added these AXE XCaliber Graphite shafts. Set looks great, feels really good in my hands, plus by eliminating approximatly 20-25 grams per club I'm averaging approximately 15 yards longer per club. At 69 and hitting that extra distance I'm smiling alot more these days. I love this combination and wish Maltby would package more sets for us older guys and gals. I shot a 74 on 6700 yd. course last week.
Date published: 2015-07-11
Rated 5 out of 5 by from AXE Caliber graphite iron shaft I bought this shaft about two months ago and I am extremely pleased with the performance. I made up this club to tryout and have been very pleased with it. This club has given me better consistency and accuracy than I had with my x-14. I am going to replace my whole set with these shafts.
Date published: 2015-08-05
Rated 5 out of 5 by from Great shaft even better price Perform very well at a great price! Great for any skill level. If you want affordable graphite iron shafts, these are the ones.
Date published: 2015-08-13
Rated 5 out of 5 by from A great shaft for any amount of money! Great shaft, buttery smooth. I even gained about 5 yards. Highly recommended
Date published: 2016-05-25
Rated 5 out of 5 by from Awesome shafts Got the L flex set put it on some x20s my 10yr old hits it straight n long.
Date published: 2016-03-02
Rated 5 out of 5 by from Best iron shaft for the price Made my Hybrid Driving Irons ( H1,H3) play so much better.
Date published: 2015-05-16
Rated 5 out of 5 by from Very responsive iron shaft I bought these (XCaliber S-flex) for a handbuilt set to replace my old Nike Slingshot HLs which were shafted with factory UST S-flex high-kick. I assembled them with a 3-PW set of new-old-stock Vulcan XDC3 forged. Tolerances were great, I measured .375" with paint coat on the shafts, when tip-prepped they were just under .370". The included trim instructions were appreciated although I cut the tips just 1/4" longer than the instruction sheet indicated in order to soft-step them a half-club or so. Once they were bonded, butt-trimmed and gripped, I hit them at the range. Of course, going from cast to forged heads, it was much more necessary to hit the ball in the sweet spot for a pure shot. Launch angle was definitely reduced and spin seems to be lower also. I gained about 5 yards per club. The very low torque (2.3, I think?) is a big help in hitting the ball dead straight. I don't fade the ball at all and in fact had been over-drawing it with the Nike clubs so I am really impressed with the accuracy benefits of this shaft. Feel is nice and smooth except on very off-center strikes. The extra 10 grams per shaft helps with tempo as well. Playing these clubs has been a blast. The shafts have not suffered any scratching in about 20 rounds. I find it easy to choke down for pitch or punch shots without losing feel. Par-3 tee shots are flying precisely without the ballooning I had with the high-launch irons. Shock from fat or bladed hits is not transmitted as with steel, although they are not as soft as some graphite S-flex I have played. Bottom line, these shafts work very well as a replacement for good-quality steel or graphite and have a player's specs for torque and kick point.
Date published: 2015-06-02
  • 2016-10-21T08:48CST
  • bvseo_cps, prod_bvrr, vn_cps_3.4.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_8
  • loc_en_US, sid_AS0023, PRD, sort_relevancy
  • clientName_golfworks

i purchased xcaliber 17 or i7 graphite iron shafts a couple years ago. Is this the same shaft?

Asked by: mark
Yes this is the same Xcaliber shaft, just a new paint color and graphics.
Answered by: JimY
Date published: 2016-10-20

What shaft would you use to replace a Yonex boron LTB600 shaft?

Asked by: Dennis
With all your individual questions asking which shaft compares best to the Yonex Boron LTB600 shaft this Project X (TT0115) would be the closest. The Yonex shaft was in the mid 80 to low 90 gram weight range. It was designed for a mid low to low trajectory. The GD0036 Graphite Design G Series 83 gram could be a good choice as well.
Answered by: JimY
Date published: 2016-10-10

I am considering reshafting a set of Ping ISI irons with these shafts. The irons are currently shafted with Dynamic Gold S300 shafts but I would like to go to a lighter and more flexible shaft.

Asked by: Doug
In the Xcaliber Iron shafts you would need to use the AS0028 shafts. They are a .355" taper tip and will fit the Ping ISI irons.
Answered by: JimY
Date published: 2016-09-26

Is the .355 version of the iron shaft constant weight ?

Asked by: Smitty
Yes the .355" version is a constant weight shaft. (AS0028)
Answered by: JimY
Date published: 2016-08-08

I need 6-GW, regular .355. Do you have them?

Asked by: Dr Golf
You would order the AS0028 Xcaliber taper tip iron shafts. You would start with the 38" raw length shaft for the 6 iron and step down in 1/2" increments. The 36" raw length shaft is used for all the wedges.
Answered by: JimY
Date published: 2016-07-25

I play left handed. Are the assembly instructions different with respect to the white and red markings on this shaft? Thanks for the info!!!

Asked by: Chuckitall72
Since they just test the oscillation plane it could be aligned the same with the Red line on the top of the shaft and the white line on the side of the shaft putting the oscillation plane in line with the target. You could also put the Red line on the bottom of the shaft which would put the White line facing the target for a left hander. Either way will work.
Answered by: JimY
Date published: 2016-07-22

I'm reshafting a set of Taylormade R7's and Mizuno JPX 825 Pro's with graphite.  Do they both need parallel tip shafts and what do you recommend that is low torque (mid to low 3's) and light weight (below 90 g.) in a stiff shaft?

Asked by: Fivecents
The R7 irons use a .370" parallel tip shaft and the JPX 825 Pro irons use a .355" taper tip shaft. The Xcaliber (AS0023) shafts could work well with the R7 and the Xcaliber (AS0028) could work well with the JPX 825 Pro's. The Aerotech Steel Fiber 80 and 80CW shafts could also work well. The 80 (AT0004I) for the R7 irons and the 80CW (AT0019I) for the JPX 825 Pro's.
Answered by: JimY
Date published: 2016-07-22

Noticed there's only 7 xcaliber shafts what if i need to shaft 3 iron? What would you recommend xcaliber driver around 55 gram and 3 wood of around 65 gram. I play to 9 handicap fast swing and like to load. What's the shipping for all these to Singapore

Asked by: tom
If you are referring to the AS0028 tapered tip Xcaliber shafts, there is no 3 iron shaft. The set starts at the 4 iron. You could use a 39" shaft in the 3 iron, it will play just slightly stiffer. Another option would be to start the set with the 39" shaft for the 3 iron and use the 36" shaft for the 9 iron and all the wedges. This is the method I would use. The Xcaliber Tour SL (AS0026) for your driver could be a good choice and the Xcaliber 6 RT (AS0041) could be a good choice for the 3 wood. For pricing and shipping you will need to contact our International Sales Manager, Donna Ours, at and she will be able to help you.
Answered by: JimY
Date published: 2016-07-01
  • 2016-10-21T08:50CST
  • bvseo_cps, prod_bvqa, vn_cps_3.4.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_22
  • loc_en_US, sid_AS0023, PRD, sort_recentAnswersFirst
  • clientName_golfworks