AXE XCaliber Graphite Wedge Spin Shafts

AXE XCaliber Graphite Wedge Spin Shafts


AXE XCaliber Wedge Spin - 85 W Flex - 370 tip (85g) 3B2M
$24.99
In Stock
AXE XCaliber Wedge Spin - 95 W Flex - 370 tip (95g) 4B2H
$24.99
In Stock
Pureing 
1-3 $15.50
4+ $13.50
Tip & Butt Trimming
$4.95
Tip Prepping
$2.95

AXE XCaliber Graphite Wedge Spin Shafts

Features:
  • The NEW filament wound design increases stability and consistency.
  • The unique tapering geometry and stiffness profile increases height and spin rate by 1000-2000 rpm over steel wedge shaft designs.
  • Designed for players who need more spins with their wedges.

Trimming Instructions

Arthur Xtreme Engineering Xcaliber Graphite Wedge Shaft Specifications

AXE XCaliber Graphite Wedge Spin Shafts is rated 5.0 out of 5 by 5.
Rated 5 out of 5 by from One hop and stop! I am tickled to death, now i haven't really stuck one and drawn it back any more than a foot but in my MMB 17 gap wedge can be trusted to give me the one hop and stop i wanted with this shaft. My pitching wedge is next.
Date published: 2014-09-12
Rated 5 out of 5 by from Great shaft!!!! Replaced a wedge flex steel shaft in a 58deg SW and it made an immediate playability increase. Felt like it was specifically made for the club. Highly recommend this shaft.
Date published: 2015-11-24
Rated 5 out of 5 by from Great I fitted these shafts to all my wedges and love feel I now get. I don't believe I've lost any distance but have gained a lot more accuracy.
Date published: 2016-06-01
Rated 5 out of 5 by from Axe wedge shafts These shafts are amazing. The spin action I get with these shafts are unmatched.
Date published: 2016-06-11
Rated 5 out of 5 by from great control accuracy spin is adequate. overall excellent shaft. will axe xcaliber be my shaft of choice yes
Date published: 2016-07-08
  • 2016-07-23T07:44CST
  • bvseo_cps, prod_bvrr, vn_cps_3.3.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_5
  • loc_en_US, sid_AS0037, PRD, sort_relevancy
  • clientName_golfworks

What XC shaft(s) are suggested graphite replacements for Cobra Baffler 6 - GW irons and Cleveland RTX 588 58 degree SW. The CB's are R flex steel and the Cleveland is a steel W flex.

Asked by: MAW
The Xcaliber Iron (AS0023) could make a good replacement for the Cobra Baffler Irons. For the Cleveland wedges, which are .355" taper tip, you will need the Xcaliber Irons (AS0028). Generally the W flex in wedges is an S flex.
Answered by: JimY
Date published: 2016-07-07

Would these shafts work with Callaway Mack daddy 2 or 3?

Asked by: foamy
No the Xcaliber Wedge Spin shafts are only available in a .370" parallel tip and the Mack Daddy wedges use a .355" taper tip shaft. The Xcaliber Wedge shaft is to big to fit the Mack Daddy wedges.
Answered by: JimY
Date published: 2016-06-22

Would this shaft fit my edel sand wedge

Asked by: pat
No, the Xcaliber Spin shaft is only manufactured with a .370" parallel tip and the Edel wedges use a .355" taper tip shaft.
Answered by: JimY
Date published: 2016-06-13

I'm going to build two wedges for my 75 year old father, about a 25 hdcp. I'm thinking the 85 gram would be best for him, do you have any opinions otherwise? 

Asked by: Thorny
The 85 gram Xcaliber Spin wedge shaft should be a good option. Not any other wedge specific options at that weight.
Answered by: GW2002
Date published: 2016-05-05

I bought this spin wedge shaft to assemble with Maltby M+ wedge. Trim instruction for this shaft is tip trim to length but in xcaliber shaft site it is butt trim to length standard. Which is correct? http://xcalibershafts.com/products/xcaliber-s

Asked by: anyseong
We have always had the .370" tip version as a tip cut only shaft. We did at one time have a.355" taper tip version that was butt cut only and that might be what you are looking at on the web site. The web site may not have been updated lately.
Answered by: JimY
Date published: 2016-04-28

Would this shaft fit my Never Compromise wedge?

Asked by: Umfaan
We can not say for sure what shaft tip size the Never Compromise wedge takes. The AS0037 comes only in a .370 tip. If the inside hosel diameter is a .355, it will not fit. If you could determine the hosel size by pulling the existing shaft and measuring the tip size, then you could be sure.
Answered by: GW2002
Date published: 2016-04-27

Can I replace a Hopkins Golf 60 deg wedge Project X shaft with this shaft - if not, what do you recommend for a soft regular graphite?

Asked by: AZ John
I don't have access to any Hopkins wedge specs. I know that they offer KBS Tour Chrome and N.S. Pro Modus shafts as a custom upgrade in their wedges. Both of these shafts are .355" taper. The XCaliber wedge shaft is a .370" so it will not fit into the Hopkins hosel. You might consider the Paderson TS-W high spin wedge shaft. It is available in a .355" taper tip option. http://www.golfworks.com/paderson-kinetixx-ts-w-355-wedge-shafts/p/PK0107/
Answered by: Admin
Date published: 2016-04-27

should the overall awing weight of all my wedges be higher than my iorn set ? which is D1 or D2.

Asked by: Richard
Generally PW and Gap wedges will be a couple of swingweights heavier then the rest of the set. The traditional 56 degrees SW is generally in the D5 range and LW can be set up to match the PW and Gap or set up to match the SW. It becomes a preference. If the LW have in the range of 8 degrees bounce it will be set up swingweight wise to match the SW. If it has less bounce then 8 degrees it will match the PW and Gap Wedges.
Answered by: JimY
Date published: 2016-03-23
  • 2016-07-23T07:46CST
  • bvseo_cps, prod_bvqa, vn_cps_3.3.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_15
  • loc_en_US, sid_AS0037, PRD, sort_recentAnswersFirst
  • clientName_golfworks