AXE XCaliber Hybrid Graphite Shaft

AXE XCaliber Hybrid Graphite Shaft


Arthur Xtreme XCaliber Hybrid A Flex - 370" tip (76g) 2B2M -
$27.99
In Stock
Arthur Xtreme XCaliber Hybrid R Flex - 370" tip (78g) 3B2M -
$27.99
In Stock
Arthur Xtreme XCaliber Hybrid S Flex - 370" tip (80g) 4B2H -
$27.99
In Stock
Pureing 
1-3 $15.50
4+ $13.50
Tip & Butt Trimming
$4.95
Tip Prepping
$2.95

AXE XCaliber Hybrid Graphite Shaft

The Arthur Xtreme Engineering Xcaliber graphite hybrid shaft features Zone Stiffness Technology (ZST) which helps golf shots get airborne without excessive spin.

Features:
  • .370" tip diameter
  • Lowest hybrid shaft balance point in the industry
  • Designed as a true hybrid shaft and not simply a longer iron shaft

Trimming Instructions

Arthur Xtreme Engineering Xcaliber Graphite Hybrid Shaft Specifications

AXE XCaliber Hybrid Graphite Shaft is rated 5.0 out of 5 by 1.
Rated 5 out of 5 by from X C Newest best cucumber Just purchased two hybrid shafts. Replaced the so called upper end shafts. I guess they should be called my ex-shafts. These new shafts are great. I will not mention the name brand but I payed 180.00 for the old shaft and it was not even close.
Date published: 2013-07-09
  • 2016-07-30T07:52CST
  • bvseo_cps, prod_bvrr, vn_cps_3.3.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_1
  • loc_en_US, sid_AS0022, PRD, sort_relevancy
  • clientName_golfworks

Hi, I would like the shaft to play between regular and stiff. Can you recommend trim to get the flex a little stiffer than regular? Thanks

Asked by: Jocko360
Depending on which number of hybrid you are working with you could start with the R flex and tip trim 1/2" more then the instructions call for or you could start with the S flex and tip trim 1/2" less then the instructions call for. If you are shafting a 15 degree hybrid the tip trimming is 0" so you would have to start with with R flex and tip trim 1/2" to make it play in between. If I knew which hybrid number you were reshafting I could be more specific as to how much you would need to tip trim the shaft with either the R or S flex.
Answered by: JimY
Date published: 2016-07-20

I have two Titleist 913H hybrids (24 and 27 degree).  Can you cut the AXE XCaliber Hybrid shafts (A flex) to the standard length for each club, attach the Titleist adjustable hosel, and add a Golf Pride Tour Velvet 360 grip (plus one wrap)?

Asked by: RBGolfer
We do not stock the replacement shaft adaptor for the Titleist 913H hybrids. You would need to check with our Customer Service Department to see if we can special order the shaft adaptor and if we can they can also help you with your order. You can contact them at 1-800-848-8358 or by email at golfworks@golfworks.com.
Answered by: JimY
Date published: 2016-03-28

What is the stiffness/launch characteristics of this shaft in regular flex? I'm looking for a hybrid shaft that I can load with a mid-high launch. I have the Adams pro hybrid heads 2014 in 20/23 degrees loft.

Asked by: hamer
Xcaliber lists the launch characteristic of the AS0022 Xcaliber Hybrid shaft as a Mid/High launch. Based on the tip stiffness and overall shaft profile, we would classify this shaft as medium tip stiffness Regular flex. Obviously, without knowing exactly how you swing or load the shaft, we could not definitively tell you you will get a mid/high launch, but the profile of the shaft is designed for the launch characteristics you are desiring.
Answered by: GW2002
Date published: 2016-02-11

I would like to order a couple of these shafts for Ping G15 hybrids but I don't see .355 tapered shafts as an option. Are these available? Thank You.

Asked by: Rod1
We do not stock the Xcaliber Hybrid shafts in a .355" taper tip and no they are not available We really do not stock any Hybrid shaft in a .355" taper tip. With UST we could special order any of their .370" Hybrid shafts in a .355" taper tip. You would need to contact Customer Service with this order.
Answered by: JimY
Date published: 2015-09-14

For a hybrid head the weighs 254 gms and 25 degree loft what would be the tip trimming for this shaft at regular flex?

Asked by: slackor
From the R flex XCaliber Hybrid shaft you would need to trim 1 1/2" from the tip for a 25 degree hybrid.
Answered by: Admin
Date published: 2015-02-02

I'm looking for a replacement shaft for an XXIO U3 19 degree hybrid . The stock club length is 40.5 inches, and mine was an SR flex. I prefer a low torque, stiff shaft so would the XCaliber be a possible replacement? Or can you recommend one?

Asked by: Kiwi_RG
  • 2016-07-30T07:55CST
  • bvseo_cps, prod_bvqa, vn_cps_3.3.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_6
  • loc_en_US, sid_AS0022, PRD, sort_recentAnswersFirst
  • clientName_golfworks