AXE XCaliber  Taper Tip Graphite Iron Shafts

AXE XCaliber Taper Tip Graphite Iron Shafts


XCaliber - R Flex 36.0" - .355 tip (75G) 3B2H
$19.99
In Stock
XCaliber - R Flex 36.5" - .355 tip (75G) 3B2H
$19.99
Backordered
XCaliber - R Flex 37.0" - .355 tip (75G) 3B2H
$19.99
Backordered
XCaliber - R Flex 37.5" - .355 tip (75G) 3B2H
$19.99
Backordered
XCaliber - R Flex 38.0" - .355 tip (75G) 3B2H
$19.99
Backordered
XCaliber - R Flex 38.5" - .355 tip (75G) 3B2H
$19.99
Backordered
XCaliber - R Flex 39.0" - .355 tip (75G) 3B2H
$19.99
Backordered
XCaliber - S Flex 36.0" - .355 tip (85G) 4B2H
$19.99
In Stock
XCaliber - S Flex 36.5" - .355 tip (85G) 4B2H
$19.99
Backordered
XCaliber - S Flex 37.0" - .355 tip (85G) 4B2H
$19.99
In Stock
XCaliber - S Flex 37.5" - .355 tip (85G) 4B2H
$19.99
In Stock
XCaliber - S Flex 38.0" - .355 tip (85G) 4B2H
$19.99
In Stock
XCaliber - S Flex 38.5" - .355 tip (85G) 4B2H
$19.99
Backordered
XCaliber - S Flex 39.0" - .355 tip (85G) 4B2H
$19.99
In Stock
XCaliber R Flex - .355", Taper Tip Set (39"-36") (75g) 3B2H
$139.99
In Stock
XCaliber S Flex - .355", Taper Tip Set (39"-36") - (85g) 4B2H
$139.99
In Stock
Pureing 
1-3 $15.50
4+ $13.50
Tip & Butt Trimming
$4.95
Tip Prepping
$2.95

AXE XCaliber Taper Tip Graphite Iron Shafts

The Arthur Xtreme Engineering XCaliber graphite iron shaft features Zone Stiffness Technology (ZST) which helps golf shots get airborne without excessive spin.

Features:
  • .355" taper tip diameter
  • Lowest balance point of any iron in the industry combined with a med/stiff lower section helps get shots airborne without excessive spin
  • At 15 cpm stiffer than the XCaliber Hybrid, easy to make a progressively stiffer set of clubs

Trimming Instructions

Arthur Xtreme Engineering Xcaliber Graphite Iron Shaft Specifications

AXE XCaliber Taper Tip Graphite Iron Shafts is rated 5.0 out of 5 by 6.
Rated 5 out of 5 by from Game Inprovement I was having Shoulder/Rotator Cup problems and the Doc. suggested that I quit golf due to the Vibration from Steel Shafts so I took out the Mizuno OE Steel and replaced with the Xcaliber 75 Gram set, no vibration and I'm hitting the ball an extra 10 yards and straighter This was a great change for mee
Date published: 2013-12-04
Rated 5 out of 5 by from Great Shafts!! I have tried them all... rifle 5.5 and 6.0; kbs S. true temper s300, I am a single digit and was skeptical of switching to lighter shafts and graphite, I am using the 85 gram stiffs. I have a med to slow tempo, smooth transition. Shafts have made me more accurate, consistent, and half a club longer. Bam flight is phenomenal, doesn't balloon and can control. Would highly recommend them.
Date published: 2016-11-13
Rated 5 out of 5 by from Nice retrofit to Mizuno irons I had been playing with light weight steel shafts in my previous iron sets (True Temper XP95 in one set, NS Pro GS95 in other), but I've always been a low ball hitter and wanted something to help with launch angle. I wanted to replace the Dynamic Gold R300s that were in my MP-54s, and these fit the bill perfectly. The kick point is not too low so the flight does not balloon, but does give me more height. I also tend to get too flat in my swing, and the lighter weight of this graphite shaft helps me swing a bit more upright. The deep, matte red finish, with minimal graphics makes for a clean, sharp look as well. There seems to be a bit more play or give (compared with steel) when I first test-fit the shafts into the hosels. However, I used a liberal pinch of shafting beads in the epoxy mixture, and the shaft fit set up quite nicely. I've played about 3 rounds (and couple driving range sessions) with these shafts, and I'm really happy with them.
Date published: 2016-05-11
Rated 5 out of 5 by from Brought life back to my Hogan's! I've been trying to find the distance I've lost in my Hogan progressive ironset w/ Apex 4 shafts over the last 4 years, and narrowed down my search for easier playing graphite to the AXE XCaliber Taper Tip .355 graphite iron set 4-PW in stiff 85g red shafts. I also own a set of UGImprovement irons with OEM graphite shafts, but the gains I experience with those are only in the soft feel area, not distance or dispersion of shot. I swapped out the very easy to play original Hogan steel shafts with the AXE XCaliber set cut 1/2" longer than the standard steel lengths and wow! 15 yards avg more distance on each iron with an even tighter controlled dispersion than the steel, but with the same flight as I was used to working with. I just ordered an AXE XCaliber Tour 6 graphite wood shaft in the same MPF as the AXE XCaliber irons to try out in my driver because I now personally see the reason for all the great reviews and want to try out more AXE XCaliber products. Hope the price continues to be so affordable on this line, I'm planning to fill some other shaft problem spots in my equipment soon!
Date published: 2015-05-19
Rated 5 out of 5 by from BETTER THAN EXPECTED Recent install in Ping G2 set provides great trajectory for here in Texas winds with reduced wear and tear than prior steel shafts.
Date published: 2016-05-05
Rated 5 out of 5 by from Improvement on OEM shaft I used this to replace a broken OEM shaft (made by UST Mamiya) on Nike iron. The customer prefers this shaft over the original.
Date published: 2016-08-18
  • y_2016, m_12, d_2, h_15
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_6
  • loc_en_US, sid_AS0028, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

I am looking for 355 taper tip shafts to go into a set of Mizuno irons. I need 2 through SW R flex and the AXE XCaliber Taper Tip Graphite Iron Shafts seem like a good choice. Do you have these in stock?

Asked by: luke
The Xcaliber .355" taper tip shaft is a very good shaft. However they do not offer a 2 or 3 iron shaft in the .355" taper tip version. We are also backordered on these at the moment and are not expecting them in until the middle of December. There are not many options in .355" taper tip graphite shafts. The Paderson Kinetixx IMRT Kevlar 950 irons are available with a 2 iron shaft and the UST Recoil 95/110/125 (US0085, US0087 & US0088) are also available with a 2 iron shaft. These are the only graphite iron shafts available with a 2 iron shaft.
Answered by: JimY
Date published: 2016-11-10

Any info on when the backordered shafts will be available?

Asked by: jtrick
Right now we are showing the second week of December before we will have these in stock.
Answered by: JimY
Date published: 2016-10-24

I use PING K15 irons set, the tip of shafts is 0.55 but my flex is A flex (senior), the XCaiber shaft is he available in A  flex ? Otherwise what would be the suitable shafts for PING K15 irons ? My SPF or MPF value is 1D3M Hello a French golfer

Asked by: PATRICK
The Xcaliber shaft is not available in "A" flex for .355" tip. The closest shaft that will fit your MPF that you provided will be the Paderson Kinetixx TS-I Trajectory series iron shafts. The MPF for these shafts is 2D3M in "A" flex. You can find them at the link below. http://www.golfworks.com/paderson-kinetixx-ts-i-355-graphite-iron-shafts/p/PK0105/
Answered by: Brent Dill
Date published: 2016-10-06

Is there a big difference between the 75g r-flex and the 85g s-flex? I am currently using a 120g s-flex shaft but have been told I need to lighten up and get more flex. Would the 85g shaft help in that regard? I don't have trouble getting ball airborn.

Asked by: wildbair
The difference between the 75R and 85S is what I would call a normal change of flex plus the 10 gram weight difference. In testing the raw shafts there is a 10 cpm frequency reading difference. I have played the R flex and hit the S flex and there is a noticeable difference. Dropping from a 120 gram weight shaft down to a 75 or 85 gram shaft will be noticeable but even more noticeable with the 75 gram shaft.
Answered by: JimY
Date published: 2016-09-28

How would these work with the DBM iron heads? I Currently hit a 7 iron carry @150 early AM 55-60 air temp at sea level.I only need 5-9 iron. Single digit handicap.

Asked by: Rhino
The Xcaliber iron shaft can match up well with the DBM irons. With the DBM irons you could use either the AS0028 .355" taper tip or the AS0023 .370" parallel tip because of the Universal Hosel Bore. There is no problem ordering shafts for just the 5 - 9 irons.
Answered by: JimY
Date published: 2016-08-15

When will an entire set of the AXE Caliper Taper tip graphite shafts be available for a set of i20 pings 4-U wedge?

Asked by: Jim
We are showing backorder on the 6,8 & 9 iron shafts in the R flex. We have the S flex shafts in stock. The R flexes should be in stock about the middle of August.
Answered by: JimY
Date published: 2016-07-28

I want to re-shaft a set of Ping Eye 2 irons 5 thru PW. Can I just buy six of the 38 inch shafts and butt trim them to length?

Asked by: Rick 55
Yes you can use 6 38" shaft and just butt cut them to length. They will play more flexible then the flex listed on the shaft and your grip sizes will not be the same through the set because the shafts will get smaller at the butt end the more you cut off for the shorter irons.
Answered by: JimY
Date published: 2016-07-20

Does the Cleveland Tour Action 588 wedges use a .355 tapered shaft?

Asked by: gjs
Yes the Cleveland Tour Action 588 wedges uses a .355" taper tip shaft.
Answered by: JimY
Date published: 2016-07-11
  • 2016-12-02T07:52CST
  • bvseo_cps, prod_bvqa, vn_cps_3.4.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_29
  • loc_en_US, sid_AS0028, PRD, sort_recentAnswersFirst
  • clientName_golfworks