AXE XCaliber  Taper Tip Graphite Iron Shafts

AXE XCaliber Taper Tip Graphite Iron Shafts


XCaliber - R Flex 36.0" - .355 tip (75G) 3B2H
$19.99
In Stock
XCaliber - R Flex 36.5" - .355 tip (75G) 3B2H
$19.99
Backordered
XCaliber - R Flex 37.0" - .355 tip (75G) 3B2H
$19.99
Backordered
XCaliber - R Flex 37.5" - .355 tip (75G) 3B2H
$19.99
In Stock
XCaliber - R Flex 38.0" - .355 tip (75G) 3B2H
$19.99
Backordered
XCaliber - R Flex 38.5" - .355 tip (75G) 3B2H
$19.99
In Stock
XCaliber - R Flex 39.0" - .355 tip (75G) 3B2H
$19.99
In Stock
XCaliber - S Flex 36.0" - .355 tip (85G) 4B2H
$19.99
In Stock
XCaliber - S Flex 36.5" - .355 tip (85G) 4B2H
$19.99
In Stock
XCaliber - S Flex 37.0" - .355 tip (85G) 4B2H
$19.99
In Stock
XCaliber - S Flex 37.5" - .355 tip (85G) 4B2H
$19.99
In Stock
XCaliber - S Flex 38.0" - .355 tip (85G) 4B2H
$19.99
In Stock
XCaliber - S Flex 38.5" - .355 tip (85G) 4B2H
$19.99
In Stock
XCaliber - S Flex 39.0" - .355 tip (85G) 4B2H
$19.99
In Stock
XCaliber R Flex - .355", Taper Tip Set (39"-36") (75g) 3B2H
$139.99
In Stock
XCaliber S Flex - .355", Taper Tip Set (39"-36") - (85g) 4B2H
$139.99
In Stock
Pureing 
1-3 $15.50
4+ $13.50
Tip & Butt Trimming
$4.95
Tip Prepping
$2.95

AXE XCaliber Taper Tip Graphite Iron Shafts

The Arthur Xtreme Engineering XCaliber graphite iron shaft features Zone Stiffness Technology (ZST) which helps golf shots get airborne without excessive spin.

Features:
  • .355" taper tip diameter
  • Lowest balance point of any iron in the industry combined with a med/stiff lower section helps get shots airborne without excessive spin
  • At 15 cpm stiffer than the XCaliber Hybrid, easy to make a progressively stiffer set of clubs

Trimming Instructions

Arthur Xtreme Engineering Xcaliber Graphite Iron Shaft Specifications

AXE XCaliber Taper Tip Graphite Iron Shafts is rated 5.0 out of 5 by 4.
Rated 5 out of 5 by from Game Inprovement I was having Shoulder/Rotator Cup problems and the Doc. suggested that I quit golf due to the Vibration from Steel Shafts so I took out the Mizuno OE Steel and replaced with the Xcaliber 75 Gram set, no vibration and I'm hitting the ball an extra 10 yards and straighter This was a great change for mee
Date published: 2013-12-04
Rated 5 out of 5 by from Nice retrofit to Mizuno irons I had been playing with light weight steel shafts in my previous iron sets (True Temper XP95 in one set, NS Pro GS95 in other), but I've always been a low ball hitter and wanted something to help with launch angle. I wanted to replace the Dynamic Gold R300s that were in my MP-54s, and these fit the bill perfectly. The kick point is not too low so the flight does not balloon, but does give me more height. I also tend to get too flat in my swing, and the lighter weight of this graphite shaft helps me swing a bit more upright. The deep, matte red finish, with minimal graphics makes for a clean, sharp look as well. There seems to be a bit more play or give (compared with steel) when I first test-fit the shafts into the hosels. However, I used a liberal pinch of shafting beads in the epoxy mixture, and the shaft fit set up quite nicely. I've played about 3 rounds (and couple driving range sessions) with these shafts, and I'm really happy with them.
Date published: 2016-05-11
Rated 5 out of 5 by from Brought life back to my Hogan's! I've been trying to find the distance I've lost in my Hogan progressive ironset w/ Apex 4 shafts over the last 4 years, and narrowed down my search for easier playing graphite to the AXE XCaliber Taper Tip .355 graphite iron set 4-PW in stiff 85g red shafts. I also own a set of UGImprovement irons with OEM graphite shafts, but the gains I experience with those are only in the soft feel area, not distance or dispersion of shot. I swapped out the very easy to play original Hogan steel shafts with the AXE XCaliber set cut 1/2" longer than the standard steel lengths and wow! 15 yards avg more distance on each iron with an even tighter controlled dispersion than the steel, but with the same flight as I was used to working with. I just ordered an AXE XCaliber Tour 6 graphite wood shaft in the same MPF as the AXE XCaliber irons to try out in my driver because I now personally see the reason for all the great reviews and want to try out more AXE XCaliber products. Hope the price continues to be so affordable on this line, I'm planning to fill some other shaft problem spots in my equipment soon!
Date published: 2015-05-19
Rated 5 out of 5 by from BETTER THAN EXPECTED Recent install in Ping G2 set provides great trajectory for here in Texas winds with reduced wear and tear than prior steel shafts.
Date published: 2016-05-05
  • 2016-07-28T07:52CST
  • bvseo_cps, prod_bvrr, vn_cps_3.3.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_4
  • loc_en_US, sid_AS0028, PRD, sort_relevancy
  • clientName_golfworks

I want to re-shaft a set of Ping Eye 2 irons 5 thru PW. Can I just buy six of the 38 inch shafts and butt trim them to length?

Asked by: Rick 55
Yes you can use 6 38" shaft and just butt cut them to length. They will play more flexible then the flex listed on the shaft and your grip sizes will not be the same through the set because the shafts will get smaller at the butt end the more you cut off for the shorter irons.
Answered by: JimY
Date published: 2016-07-20

Does the Cleveland Tour Action 588 wedges use a .355 tapered shaft?

Asked by: gjs
Yes the Cleveland Tour Action 588 wedges uses a .355" taper tip shaft.
Answered by: JimY
Date published: 2016-07-11

I have Karsten irons .355 tip that have no ferrules would these shafts work?

Asked by: Rod
Yes the Xcaliber AS0028 iron shafts will fit the Karsten irons.
Answered by: JimY
Date published: 2016-07-08

I would like to know if these shaft would fit on my CB3 Black Adams irons?

Asked by: jbot
The Adams CB3 Black irons use a .370" parallel tip shaft. You would use the Xcaliber AS0023 iron shafts. http://www.golfworks.com/axe-xcaliber-graphite-irons-shafts/p/AS0023/
Answered by: JimY
Date published: 2016-07-08

Does this shaft fit Ping I20 irons? Thanks

Asked by: Jim
Yes the Xcaliber taper tip iron shafts will fit the Ping I20 irons.
Answered by: JimY
Date published: 2016-07-06

I want to re-shaft my callaway tour x 20 4 iron what shaft would I need. I think it is a 370t.

Asked by: the big easy
The Callaway X20 Tour irons use a .355" taper tip shaft. With the AS0028 the 39" raw length shaft is the 4 iron shaft. http://www.golfworks.com/axe-xcaliber-taper-tip-graphite-iron-shafts/p/AS0028/
Answered by: JimY
Date published: 2016-06-20

How would this shaft feel in a 3 iron Titeliest 712u?

Asked by: Coooooop15
The Xcaliber AS0028 longest shaft (39") is the 4 iron shaft so installing it into the 3 iron will make it play a little stiffer then it's listed flex. It should feel just fine assuming it's flex and characteristics match a players needs.
Answered by: JimY
Date published: 2016-05-31

What does the low torque mean for someone like me who still prefers reg shafts to most senior shafts that I have used, I want to reshaft my ping eye 2s. Price is right, but is the shaft ok for slower swing speeds.

Asked by: Grandpa Al
The lower torque reading in the Xcaliber .355" taper tip graphite iron shafts should not really cause you a problem. These are what we call a low balance point graphite shaft which means they are designed with more weight towards the tip end of the shaft to help keep swingweights closer to what they would be with steel. It makes the shaft wall thicker at the tip end of the shaft and can creates a lower torque reading. Flex wise these shafts play true to flex or just a little more flexible then normal. They could be a good match for your Ping Eye 2 irons.
Answered by: JimY
Date published: 2016-05-23
  • 2016-07-28T07:53CST
  • bvseo_cps, prod_bvqa, vn_cps_3.3.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_24
  • loc_en_US, sid_AS0028, PRD, sort_recentAnswersFirst
  • clientName_golfworks