Callaway Hosel Adaptor

Callaway Hosel Adaptor


Callaway Driver Adaptor .335"
$3.99
In Stock
Callaway Driver Adaptor .350"
$3.99
In Stock

Callaway Hosel Adaptor

Replacement adaptor with an oversized .630" OD specifically designed to fit all Callaway Razr Hawk, Diablo Edge, Octane, Octane Tour and FT-iz Driver Heads. Available in both .335" and .350".

AccessDeniedAccess DeniedB6740ABB4FC5FF44zTsxfoOhXcP/eUjKDkD9hEBEwu9cpaxFMya+zu1Q+vDIXY7588I+MsJenrUyhGajIgp11Z9706Y=

I want to reshaft a Callaway X fairway wood with a .335 shaft that was removed from a Cobra Baffler fairway wood. Which adapter insert would I need to do the reshafting?

Asked by: Ron B
You would need the BB9002 adapter for this installation.
Answered by: JimY
Date published: 2016-07-01

Which adapter do I need for a Callaway Warbird driver?

Asked by: gkp22
The Callaway Warbird metalwoods used the BB9003 adapter. http://www.golfworks.com/callaway-collared-iron-ferrule-370/p/BB9003/
Answered by: JimY
Date published: 2016-06-09

Will this work on the FT IQ Driver?

Asked by: Kgann
For the IQ if you are using a .350" tip size shaft you would want the CSS and for a .335" tip size shaft you would want the BB9002.
Answered by: JimY
Date published: 2016-05-26

What ferrule do I need for a Callaway Hyper X Driver?

Asked by: Carl
The CSS Callaway adaptor ferrule appears to the correct ferrule for the Hyper X. We list the CSS for the X-460 Driver and from images we have it appears to be the correct one.
Answered by: GW2002
Date published: 2016-04-27

Hi, I have a Callaway FT 4 wood which has a .350 tip.I would like to change the shaft and put in a .335 Aldila NVS shaft.Can I use this Callaway Hosel adapter (.335) and simply re-shaft the club?

Asked by: RASPAT
If this is the FT 4 wood that you have we do not have a Callaway ferrule for this club. http://www.callawaygolfpreowned.com/golf-clubs/fairway-woods/yhf2826205.html?cgid=fairway-woods&genderHand=Ladies%2FRight&gclid=CJCx8YPC48sCFdNahgodrEYEKQ You will need to use either a brass shim (SHIM 15) or a Universal Plastic Shim to install a .335" shaft into the .350" hosel bore. http://www.golfworks.ca/the-golfworks-brass-adaptor-shims/p/SHIM/ http://www.golfworks.ca/universal-shim-with-ferrule-335/p/BB9018/
Answered by: JimY
Date published: 2016-03-28

I need an adaptor to fit a Diablo Octane driver and a 370 adilla Rougue Pro shaft. A flex

Asked by: aardvark
You would want the BB9025 for the .335" tip size shaft.
Answered by: JimY
Date published: 2016-03-09

Will this fit a Big Bertha Diablo driver?

Asked by: chukarjohn
Yes this will work.
Answered by: JimY
Date published: 2015-12-30

I have Callaway Diablo Edge and Big Bertha Diablo driver heads. Which adaptors do I need?

Asked by: Chukarjohn
The BB9025 should work for both of these drivers.
Answered by: JimY
Date published: 2015-12-30
  • 2016-07-24T07:52CST
  • bvseo_cps, prod_bvqa, vn_cps_3.3.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_8
  • loc_en_US, sid_BB9025, PRD, sort_recentAnswersFirst
  • clientName_golfworks