Callaway Razr Hawk, FT-iz and Diablo Fairway/Hybrid Adaptor

Callaway Razr Hawk, FT-iz and Diablo Fairway/Hybrid Adaptor


Razr Haek, FT-iz and Diablo FWY Adaptor - .335"
$3.75
In Stock
Razr Hawk, FT-iz and Diablo FWY Adaptor - .350"
$3.75
In Stock
FT-iz and Diablo Hybrid Adaptor - .370"
$3.75
In Stock

Callaway Razr Hawk, FT-iz and Diablo Fairway/Hybrid Adaptor

Replacement adaptor with an oversized OD specifically designed to fit all Callaway Razor Hawk, FT-iz and Big Bertha Diablo fairway woods and hybrids. Available in .335" and .350" for fairway woods and .370" for hybrids.

Callaway Razr Hawk, FT-iz and Diablo Fairway/Hybrid Adaptor is rated 5.0 out of 5 by 1.
Rated 5 out of 5 by from Reshaft 2006 Callaway X hybrid This is a perfect fit for Callaway X. The straight sided portion is 0.43" (or very close to that) so measure the I.D. of the hosel of the head you are reshafting. It was easy to repair my friends club with this adapter. I used the 0.335 version since I had a shaft of that size. Perfect.
Date published: 2016-10-20
  • y_2016, m_12, d_2, h_17
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_1
  • loc_en_US, sid_BB9026, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

What is the outside diameter of the parallel portion? I am trying to re-shaft an X hybrid circa 2006. The through hole is 0.350" and the large bore portion of the hosel is 0.43"

Asked by: Oculos
With the Callaway bore through X hybrid if you are installing a .335" tip diameter shaft you will need the BB9002 adapter and if you are installing a .350" tip diameter shaft you will need the CSS adapter. These are the correct adapters for the X Hybrid. http://www.golfworks.com/callaway-335-shaft-adaptor/p/BB9002/ http://www.golfworks.com/callaway-350-shaft-adaptor/p/CSS/
Answered by: JimY
Date published: 2016-09-29

Will this adapter fit a Callaway FT-iQ driver?

Asked by: Stevekc
For the Callaway FT-iQ driver if you are installing a .335" tip size shaft you would use the BB9002 adapter and if you are installing a .350" tip size shaft you would use the CSS adapter. http://www.golfworks.com/callaway-335-shaft-adaptor/p/BB9002/ http://www.golfworks.com/callaway-350-shaft-adaptor/p/CSS/
Answered by: JimY
Date published: 2016-06-21

What is the hosel diameter on Razr Hawk 3 wood? Can the hosel accept a shaft of the proper tip diameter? Do I use the size of adaptoer 335 or 350 to match the shaft to be installed or are the sizes specific to the actual hosel diameter? Thanks

Asked by: scotts
The Razr Hawk 3 wood used a .350" tip diameter shaft. You would need the BB9025 adaptor and specify the .350" size when ordering or specify the .335" size adaptor if you want to install a .335" tip diameter shaft. The adaptors are slightly different for the .350" shaft and .335" shaft. http://www.golfworks.com/product.asp_Q_pn_E_BB9025
Answered by: JimY
Date published: 2015-07-29

Will this fit a 2005 heavenwood hybrid 4h stock shaft 

Asked by: Rico
Best guess is that the BB9026 should work. Since we do not have that model to verify, we can not sure.
Answered by: GW2002
Date published: 2015-06-24

What ferrule fits the Callaway X2 fairway wood?  I would like to install a .335 tipped shaft in this club.

Asked by: humphreys
  • 2016-12-04T07:40CST
  • bvseo_cps, prod_bvqa, vn_cps_3.4.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_5
  • loc_en_US, sid_BB9026, PRD, sort_recentAnswersFirst
  • clientName_golfworks