Fujikura Fuel Graphite Wood Shafts

Fujikura Fuel Graphite Wood Shafts

50 S Flex - 46", .335" tip (57gm) 4B2M -
In Stock
1-3 $15.50
4+ $13.50
Tip & Butt Trimming
Tip Prepping

Fujikura Fuel Graphite Wood Shafts

Just like a high performance engine that burns high-octane fuel for more horsepower and torque, your shaft can perform the same way using advanced technology as its fuel. With FUEL, you can see where your energy is coming from through our proprietary FUEL ROD TECHNOLOGY, created with a COMBUSTION CHAMBER and LOAD INJECTOR TIP. FUEL uniquely utilizes this technology to generate greater distance and accuracy on a more consistent basis. Fuel Shafts sold as install only. Install includes custom assembled, reshaft or OEM adaptor install (adaptor install free of charge).

  • Install only golf shaft: Free Installation! Includes: reshafting fee (Free), custom assembly (Free) and any in stock OEM adaptor (Free).

Trimming Instructions

Fujikura Fuel Shaft Specifications

AccessDeniedAccess Denied31856E66AB0056D8MDUffqd8Xlk2OIfJCR9i7IaTlcatfwm9qPNBtwMAzrBmQGk8J2zt5QPz4C+T16kj

I have a R15 with a regular shaft and want to move to stiff, will this manage that? Also, if I order this as it's an "install" only, do you need the club to complete, or will you just assemble shaft and adapter? Suggestions?...

Asked by: NJDon
Yes the Fuel will work with the R15 and should work fine as long as it's specifications fit your needs. With the install only it can be just installed into the shaft adaptor. It does not have to be the complete club.
Answered by: JimY
Date published: 2016-07-12

My son broke the shaft on his Taylor Made RBZ stage 2 10.5 degree driver. It has a Fujikuru Rocket Fuel Flex S 50 Grams shaft. Please recommend the right replacement with accessories. Thanks

Asked by: Doug
The FK0069 Fuel shaft that we stock will play a little stiffer then the stock Rocket Fuel shaft that Fujikura made for Taylor Made. However this still might be your closest replacement. You would need a new shaft adapter to fit this .335" tip diameter shaft. The stock shaft adapter used a .350" tip diameter shaft. You would need the BB9065 shaft adapter.
Answered by: JimY
Date published: 2016-06-27

My son hits an original 4DX draw bias driver with extra stuff shaft. The shaft broke. He hit a ping with the fuel shaft in launch monitor and hits it straight but not as far as Nickent head by 35 yards short. Can the fuel go into his nickent head.

Asked by: vince49
I believe the NIckent 4DX driver was a .335" tip diameter shaft size and the Fujikura Fuel shaft will fit. If the Nickent driver used a .350" tip diameter shaft the Fuel shaft could be shimmed to fit using either the SHIM15 or the Universal Plastic Shim BB9018. This is an older Nickent driver back before Nickent went out of business and I am just not sure if they used a .335" shaft or a .350" shaft.
Answered by: JimY
Date published: 2016-05-26

Fujikura Fuel 50, Stiff 57 grams. Can I order the shafts with pre - cut on the tip ( tipping ) by 1" , so total length is 45" ? Thanks JimY.

Asked by: asw7576
Yes you can request a Shaft Prep and ask us to tip trim 1" . There is an additional charge of $4.95 for this service.
Answered by: JimY
Date published: 2016-05-24

I want to put a regular flex shaft into my M1 driver. what do you recommend

Asked by: Dewey
It would help to know what you need this new shaft to do for you? Taylor Made uses a Fujikura Pro 60 shaft as a stock shaft in the M1 driver. This shaft is made exclusively for Taylor Made. We do stock the Pro 63 (FK0081) and the Pro 53 (FK0080) and either one could match well with the M1 assuming the shafts match your needs. We also have the Fujikura EXS 5.0 and 6.0 (FK0071) that could work well. The Fujikura Fuel 50 or 60 could also work well. It just depends on which shaft best fits your needs. http://www.golfworks.ca/fujikura-pro-53-63-graphite-wood-shafts/p/FK0080/ http://www.golfworks.ca/fujikura-pro-53-63-graphite-wood-shafts/p/FK0080/ http://www.golfworks.com/fujikura-exs-graphite-wood-shafts/p/FK0071/
Answered by: JimY
Date published: 2016-04-18

I have a Taylormade R7 460cc driver. Can this shaft be installed on this clubhead? Are there any adapters required?

Asked by: valpodave64
The Taylor Made R7 460cc driver uses a .350" parallel tip diameter shaft. To properly install this .335" parallel tip diameter shaft into this driver you will need to use this Taylor Made ferrule adaptor. (BB9008) http://www.golfworks.com/product.asp?pn=BB9008
Answered by: JimY
Date published: 2016-01-19

Hi I would like to know if could by this shaft but 2" longer. Thank you 

Asked by: guidosargiotto
This shaft is made only in the 46" raw length. If you installed it uncut into most of the modern designed driver heads without cutting the shaft at all you would have a finished length in the 47.25" range.
Answered by: JimY
Date published: 2015-12-15

I have a cobra amp driver I want to reshaft. Looking at the fujikura fuel , 60 s. Do you have adapter? What else besides grip n length do I have to think about? Thks

Asked by: Dre OK
We do not have the AMP adaptor in stock but we can get it via special order. Besides grip and length we would also need to know which setting in the adaptor you would like the shaft aligned to. Since this would involve a special order for the adaptor it would be best to call in this order at 1-800-848-8358.
Answered by: JimY
Date published: 2015-10-05
  • 2016-07-27T07:50CST
  • bvseo_cps, prod_bvqa, vn_cps_3.3.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_21
  • loc_en_US, sid_FK0069, PRD, sort_recentAnswersFirst
  • clientName_golfworks