Golf Club Wood Ferrules - Colored Rings

Golf Club Wood Ferrules - Colored Rings


52PW Dozen - Black/Chrome Std .335" Wood Ferrules
$3.99
In Stock
52PW Single - Black/Chrome Std .335" Wood Ferrules
$0.50
In Stock
53PW Dozen - Black/White Std .335" Wood Ferrules
$3.99
In Stock
53PW Single - Black/White Std .335" Wood Ferrules
$0.50
In Stock
54PW Dozen - Black/Gold Std .335" Wood Ferrules
$3.99
In Stock
54PW Single - Black/Gold Std .335" Wood Ferrules
$0.50
In Stock
55PW Dozen - Black/Red Std .335" Wood Ferrules
$3.99
In Stock
55PW Single - Black/Red Std .335" Wood Ferrules
$0.50
In Stock
56PW Dozen - Clear/Black/Clear Std .335" Wood Ferrules
$3.99
In Stock
56PW Single - Clear/Black/Clear Std .335" Wood Ferrules
$0.50
In Stock
57PW Dozen - Gold/Black/Gold Std .335" Wood Ferrules
$3.99
In Stock
57PW Single - Gold/Black/Gold Std .335" Wood Ferrules
$0.50
In Stock
58PW Dozen - Chrome/Black/Chrome Std .335" Wood Ferrules
$3.99
In Stock
58PW Single - Chrome/Black/Chrome Std .335" Wood Ferrules
$0.50
In Stock
83PW Dozen - Black/Chrome Oversize OD .350" Wood Ferrules
$3.99
In Stock
86PW Dozen - White/Black .335" Wood Ferrule
$4.99
In Stock
86PW Single - White/Black .335" Wood Ferrule
$0.50
In Stock

Golf Club Wood Ferrules - Colored Rings

HUGE FERRULE SELECTION!

A complete selection of ferrules with modern outside diameters that match perfectly to the outside diameter of our hosels. All ferrules have a 19° countersink which allows a cushion of epoxy to form between the top of the hosel and the inside of the ferrule, strengthening the bond. Each ferrule also is “pre-washed,” arriving at your shop with a high-gloss finish and no need for an acetone wipe to make it shine!

Golf Club Wood Ferrules - Colored Rings is rated 4.0 out of 5 by 1.
Rated 4 out of 5 by from dress up your woods Nice way to dress up your woods or irons.
Date published: 2013-06-24
  • y_2016, m_12, d_7, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_1
  • loc_en_US, sid_52PWS, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

I need some ferrules for my ping G irons. I got some ping shafts that are .355 Taper steel. Can you tell me which ferrules would work . Item numbers would be great. Thank you

Asked by: mike
The BB9047 Ping Collared Ferrule should also fit the Ping G irons. Or you could use the BB0008 collared ferrule. Ping does use a collared ferrule. Even though the BB0008 is for .370" shafts it will work with .355" taper tip shafts. .355" taper tip shafts taper out to approximately .370" where the shaft exists the top of the hosel. So the .370" ferrules will work and generally match closer to the outside hosel diameter.
Answered by: JimY
Date published: 2016-10-18

Why can you order some as singles, but others in dozens? I just need one of the white 86pw. Could I order as a single?

Asked by: wdh2028
Sorry for the over site. We will get that set up so that you can order the single 86PW.
Answered by: JimY
Date published: 2016-08-25

what is the OD and ID of each ferrule and where is it listed

Asked by: Jim
If you scroll down the page at this link you will see the OD and ID information for each ferrule listed. http://www.golfworks.com/golf-club-wood-ferrules-colored-rings/p/52PWS/
Answered by: JimY
Date published: 2016-08-16

Hi. I am reshafting my Titleist 735 irons with ProjectX 5.5 shafts. What ferrules do I need? Thanks.

Asked by: Toddyb
The BB9063 should also fit the 735 irons. Other wise I would use the 60PI. http://www.golfworks.com/the-golfworks-ap1-ap2-355-iron-ferrule/p/BB9063/
Answered by: JimY
Date published: 2016-07-05

Hello I have a set of Titliest 714 AP2 irons that I am changing out the shafts. What are the ferrules size I should purchase?

Asked by: Jay
We do have the BB9063 ferrule for the Titleist AP1 & AP2 irons. http://www.golfworks.com/the-golfworks-ap1-ap2-355-iron-ferrule/p/BB9063/
Answered by: JimY
Date published: 2016-06-10

What ferrule should I use for a Nike Vr ii Pro 10.5 driver with .335 shaft? Thanks

Asked by: ASG
If this is the driver you have then it would need the BB9033 Nike Adaptor. http://www.globalgolf.com/articles/nike-vr-pro-series/ http://www.golfworks.com/product.asp?pn=BB9033
Answered by: JimY
Date published: 2016-01-21

I have a Accra Fx140 M3 driver shaft Accra fx H100 75 hybrid  Nippon 750hg tapered shafts What size ferrule(s) do I need?

Asked by: Rgheartbeat
On Accra's web site they list the FX140 M3 wood shaft as having a .335" tip diameter and the FX H100 75 Hybrid shaft as having a .370" tip diameter. So you would need a .335" wood ferrule and a .370" iron ferrule. http://www.accragolf.com/golf-shafts/accra-fx/fx-100-series/
Answered by: JimY
Date published: 2015-12-14

What quantity discounts do you have for 58PW?

Asked by: steve
Our price per dozen is $3.99 for the 58PW. If you are looking for larger volume then a dozen it would be best to contact Customer Service and see what they might be able to do for you. You can contact them at golfworks@golfworks.com or by calling 1-800-848-8358.
Answered by: JimY
Date published: 2015-07-28
  • 2016-12-08T08:09CST
  • bvseo_cps, prod_bvqa, vn_cps_3.4.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_15
  • loc_en_US, sid_52PWS, PRD, sort_recentAnswersFirst
  • clientName_golfworks