Grafalloy ProLaunch Red Graphite Iron Shaft

Grafalloy ProLaunch Red Graphite Iron Shaft


R Flex - 355 tip (37.5) - 3B1H
$39.99
In Stock
S Flex - 355 tip (37) - 4C1H
$39.99
Backordered
S Flex - 355 tip (37.5) - 4C1H
$39.99
In Stock
S Flex - 355 tip (38) - 4C1H
$39.99
In Stock
S Flex - 355 tip (38.5) - 4C1H
$39.99
In Stock
S Flex - 355 tip (39) - 4C1H
$39.99
In Stock
S Flex - 355 tip (40) - 4C1H
$39.99
In Stock
Pureing 
1-3 $15.50
4+ $13.50
Tip & Butt Trimming
$4.95
Tip Prepping
$2.95

We Also Recommend

Grafalloy ProLaunch Red Graphite Iron Shaft

The Grafalloy Prolaunch Red graphite wood shaft promotes a lower ball flight than the original ProLaunch with all the same performance characteristics.

Features:
  • .355" and .370" tip diameters available
  • .355" varied lengths; .370" available in 40in
  • Features Micro-Mesh tip technology
  • Ultimate combination of power and tour-caliber trajectory built upon the unequaled performance benefits of Prolite 35 graphite shaft

Trimming Instructions

Grafalloy ProLaunch Red Graphite Iron Shaft is rated 5.0 out of 5 by 1.
Rated 5 out of 5 by from Great feel These shafts are the best I've experienced in my irons. I have a very high trajectory with the irons. These Reds brought my trajectory down to a mid flight with a penetrating ball flight. The low torgue is fantastic hitting out of the rough. I loved these shafts do much in my irons I put it in my Driver with even better results.
Date published: 2007-09-29
  • 2016-07-28T07:54CST
  • bvseo_cps, prod_bvrr, vn_cps_3.3.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_1
  • loc_en_US, sid_TT0022, PRD, sort_relevancy
  • clientName_golfworks

What is he weight in grams for a 36 in. wedge shaft Reg. flex.

Asked by: RGR
They were listed as 87 grams for the R flex.
Answered by: JimY
Date published: 2016-07-13

Hello I would like to put new shafts on Ping eye 2 ber irons , I have 2-lw I want to reshaft the 2-9 irons in a senior flex what can fit these irons and my game

Asked by: Gino
For the Ping Eye 2 BeCu irons you will need a .355" taper tip shaft. In steel with a .355" taper tip and Senior flex we have the Nippon N.S. Pro 8950GH (NP0005) A flex and the Nippon N.S. Pro Zelos 7 (NP0014) A flex. In graphite shafts we have the Aerotech SteelFiber 70CW (AT0020I) in A flex. None of these shafts are available in a 2 iron shaft. The sets start with a 3 iron shaft. You would have to use a 3 iron shaft in the 2 iron as well. http://www.golfworks.ca/nippon-pro-ns-pro-8950gh-steel-iron-shafts/p/NP0005/ http://www.golfworks.ca/nippon-zelos-7-355-taper-tip-iron-shafts/p/NP0014/ http://www.golfworks.ca/aerotech-steelfiber-70-cw-graphite-iron-shafts-355/p/AT0020I/
Answered by: JimY
Date published: 2016-07-07

is this compatible with Ping G20 irons? thanks.

Asked by: dan
This ProLaunch Red iron shaft will fit the Ping G20 but this is a high bend point firm tip shaft for a lower ball flight. The stock graphite shaft for the G20 would be more of a mid to mid/low bend point shaft for a mid to mid/high ball flight along the lines of this Xcaliber shaft. (AS0028) http://www.golfworks.com/axe-xcaliber-taper-tip-graphite-iron-shafts/p/AS0028/
Answered by: JimY
Date published: 1970-08-17

What is the trim code for use with the trimming instructions?

Asked by: krx
Being a .355" taper tip shaft these irons are a butt cut only trimming instruction. You would follow trim code IR1. http://www.golfworks.com/images/art/shaft_trim_inst.pdf
Answered by: JimY
Date published: 2016-05-17

where are the specs for this product. Looking to buy would like price, torque, length,etc.

Asked by: joejlo
The ProLaunch Red iron shafts were a high bend point firm tip designed for a lower trajectory. Torque was 2.8 degrees. These are taper tip shafts and the lengths went from 40" for a 3 iron down in 1/2" increments to 36.5" for the wedges. The cost of these is $39.99. They are a discontinued shaft and we do not have full sets available. For whatever reason we had this web page turned off in house but it is now working and you can see what shafts we have available and the price. Since these shafts are on close-out we should be able to mark down the price some. If you are interested you can contact customer service at golfworks@golfworks.com or by calling 1-800-848-8358 and they will be able to help you. Regarding the price change ask them to check with Jim.
Answered by: JimY
Date published: 2016-02-25

Where is the bend point? Is it the same as the Pro Lite 35 iron shaft?

Asked by: Bob C
The PL Red iron shaft (TT0022) has a high bend point.
Answered by: GW2002
Date published: 2015-05-26
  • 2016-07-28T07:52CST
  • bvseo_cps, prod_bvqa, vn_cps_3.3.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_6
  • loc_en_US, sid_TT0022, PRD, sort_recentAnswersFirst
  • clientName_golfworks