Grafalloy ProLite 35 Graphite Wood Shafts

Grafalloy ProLite 35 Graphite Wood Shafts


R Flex - 335 tip (62g) 3B1M
$32.99
In Stock
S Flex - 335 tip (64g) 4B1M
$32.99
In Stock
X Flex - 335 tip (66g) 5B1M
$32.99
In Stock
Pureing 
1-3 $15.50
4+ $13.50
Tip & Butt Trimming
$4.95
Tip Prepping
$2.95

Grafalloy ProLite 35 Graphite Wood Shafts

The Grafalloy Prolite 35 graphite wood shaft is the original ultra light high performance golf shaft.

Features:
  • .335" tip diameters available
  • Low torque design ideal for stronger players
  • Great choice for today's high-performance driver heads

Trimming Instructions

Grafalloy ProLite 35 Graphite Wood Shafts is rated 4.75 out of 5 by 8.
Rated 5 out of 5 by from Still the ONE! I started playing 12 years ago, and after testing a dozen or so shafts over 2 years, I definitively found this one the best for control and with the added bonus of great distance. I got a new driver in 2008 (which has a tip stiff UST 65, also a great shaft), but the face caved in last month. I got a new SQ STR8 fit from Nike. I didn't like the Axivcore Black shaft it comes with, so I pulled Grafalloy ProLite 35 from my old wood and put it in the Nike. Voila! The ball flight went back down, no loss of carry, and better control. This shaft it the ONE if you hit the ball high. Its high kick point/stiff tip design gives it a naturally low spinning trajectory with no ballooning. as other reviewers have stated, you can spend a lot more, but you won't get any more.
Date published: 2012-02-01
Rated 5 out of 5 by from Great shaft I was hitting my 8.5 Callaway driver higher than I wanted to. I put this shaft in and the trajectory came down to a better angle than the original manufacturer shaft. Distance and roll increased also. It's hard to believe a more expensive shaft could work any better than this one. I have tried many different shafts (Grafalloy and others) over the years and this is the one I love for my driver. More distance and I didn't have to make the shaft longer than standard.
Date published: 2009-06-10
Rated 5 out of 5 by from best bang for the buck This shaft is the best that I have ever used! I get great distance, and because it's light weight, I can have a higher swing speed. The best kick point, you'll know when you get it! Don't waste your money on high priced shafts, this is the one especially for Callaway Drivers!
Date published: 2007-09-24
Rated 5 out of 5 by from best bang for the buck This shaft is the best that I have ever used! I get great distance, and because it's light weight, I can have a higher swing speed. The best kick point, you'll know when you get it! Don't waste your money on high priced shafts, this is the one especially for Callaway Drivers!
Date published: 2007-09-24
Rated 5 out of 5 by from Absolute value for money I have had this shaft in my driver for 5 yrs now, why, because i have yet to find anything else that gives me the ball flight and distance of the prolite 35. dont waste your money on expensive shafts this is the best shaft on the market, perfect for my Titleist.
Date published: 2009-06-11
Rated 4 out of 5 by from Hitting it how I want Replaced my stiff flex shaft with regular flex on a 9.5 degree Titleist 975J Driver. Got the lower ball flight I was looking for and a flex that better matches my swing speed.
Date published: 2016-07-18
Rated 5 out of 5 by from Old Reliable A great feel, soft and smooth with a low launch and spin. The price is right and the performance outstanding...one of the best designed shafts...ever
Date published: 2015-10-30
Rated 4 out of 5 by from Replacement shaft The shaft was a perfect fit for my club head and the price was right.
Date published: 2015-07-29
  • 2016-07-28T07:52CST
  • bvseo_cps, prod_bvrr, vn_cps_3.3.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_8
  • loc_en_US, sid_TT202211, PRD, sort_relevancy
  • clientName_golfworks

Can I put this shaft on a three metal?

Asked by: Dilo
Yes the ProLite 35 can be installed into a 3 metal. There is not recommended tip trimming so you would just install and butt cut for your finished playing length for the 3 metal.
Answered by: JimY
Date published: 2016-07-22

I want to order Grafalloy ProLite 35 Graphite Wood Shaft for SLDR 3 wood, I'd also need to order SLDR Shaft Adaptor (TM0023) I'd like shaft cut to 44 inches. Do ya'll do all this before shipping and if so do I annotate my request in notes? thank you

Asked by: edward
Yes we can do this for you before we ship the shaft. You will need to order the shaft and the shaft adaptor and in the Special Notes at Checkout tell use it's the SLDR 3 wood, the finished length you want the club to be and how you want the shaft aligned into the shaft adaptor (which setting).
Answered by: JimY
Date published: 2016-07-20

What do I need to do to put this shaft in my ping g25

Asked by: bone
You would either need to remove the existing shaft from the existing shaft adaptor or purchase a new shaft adapter for the Ping G25 (PGC001). We do sell our OEM Shaft Adaptor Saver Kit (GW0130) that works with a graphite shaft puller for removing the existing adaptor. http://www.golfworks.com/ping-i25-g25-anser-shaft-adaptor/p/PGC001/ http://www.golfworks.com/oem-adaptor-saver-kit/p/GW0130/
Answered by: JimY
Date published: 2016-07-07

Are these shafts available in 350 tip I would like to put it in my ping driver 

Asked by: derek72
No the ProLite 35 is not available in a .350" tip diameter. Depending on which model Ping driver you would have you would use the BB9048 for the .335" size to install a .335" shaft into the .350" hosel bore. http://www.golfworks.com/ping-i20-and-g-series-shaft-adaptors/p/BB9048/
Answered by: JimY
Date published: 2016-06-06

How much would I tip this shaft for a 5 wood?

Asked by: Terry
0" tip trimming for a 5 wood. The ProLite 35 is a butt cut only shaft. You do no tip trimming for an metalwood installation.
Answered by: JimY
Date published: 2016-06-01

I have the Grafalloy ProLite Fairway S in my 3 wood now and it is a perfect fit for my swing. I a looking to put the same shaft in my R1 driver. How does this shaft compare to the ProLite Fairway S? Torque, kick point, launch conditions? 

Asked by: J man
The TT202211 Prolite 35 should play very similarly in your R1 driver as it does in your fairway. The construction of the Prolite 35 we carry has not changed for years, so if we assume the ProLite fairway was designed to be the match to the driver shaft, they should have similar playing characteristics.
Answered by: GW2002
Date published: 2016-05-06

Can Iget A grafalloy  prolite 35 shaft with a titleist 913 draiver adapter mounted on it

Asked by: f747
Yes we can do this. You would need to order the shaft and the adaptor and at Checkout in the Special Notes box tell us that you would like us to install the adaptor. There is an addtional charge of $10.00 for installing the adaptor.
Answered by: JimY
Date published: 2016-01-18

do they make the grafallory prolite 35t shaft 44inches long

Asked by: daddyray
No the ProLite 35 does not come in a 44" version. If you want a club at 44" you would install this shaft and cut from the butt end (grip end) to your 44" finished length.
Answered by: JimY
Date published: 2015-08-20
  • 2016-07-28T07:50CST
  • bvseo_cps, prod_bvqa, vn_cps_3.3.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_11
  • loc_en_US, sid_TT202211, PRD, sort_recentAnswersFirst
  • clientName_golfworks