Graphite Design G Series Graphite Iron Shaft

Graphite Design G Series Graphite Iron Shaft


83 R Flex, 40" .370" (83gm) - 3B2M -
$21.99
Backordered
83 S Flex, 40" .370" (83gm) - 4B2M -
$21.99
In Stock
Pureing 
1-3 $15.50
4+ $13.50
Tip & Butt Trimming
$4.95
Tip Prepping
$2.95

Graphite Design G Series Graphite Iron Shaft

The G Series iron shaft with X Directional Technology (XDT) is the next generation of premium Graphite Design shafts and is designed to be very adaptable to today’s vast iron head technology. The G Series iron shaft performance characteristics produce a mid launch trajectory and a low to mid spin to enhance distance control.

Trimming Instructions

Graphite Design G Series Iron Shaft Specifications

Graphite Design G Series Graphite Iron Shaft is rated 5.0 out of 5 by 1.
Rated 5 out of 5 by from Excellent Feel I bought this several months ago and just keep it, but 2 weeks ago i decided to replace my steel shaft to this graphite shaft, and i am very happy that i did, i was hitting additional distance and its accurately dead on.
Date published: 2015-11-16
  • y_2016, m_12, d_5, h_16
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_1
  • loc_en_US, sid_GD0036, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

I just bought a set of PXG irons with the Aerotech i70 shafts. They feel a bit harsh to me. Would a standard graphite shaft feel better?

Asked by: mark
You might look at the UST Recoil 670 (US0072). To me the feel is a little softer then the Steel Fiber shafts. We have very good success and feedback with the Xcaliber Iron (AS0023) graphite irons shafts. They could be another good choice. http://www.golfworks.com/ust-mamiya-recoil-660-670-680-irons/p/US0072/ http://www.golfworks.com/axe-xcaliber-graphite-irons-shafts/p/AS0023/
Answered by: JimY
Date published: 2016-08-02

Do these shafts fit Taylormade TP MC irons

Asked by: Frank P
Taylor Made TP MC irons use a .355" taper tip shaft. All Taylor Made TP irons use a .355" taper tip shaft. The G-Series iron shafts are only manufactured with a .370" parallel tip. The TP MC irons heads would have to be reamed or rebored to accept the .370" parallel tip shafts for these to be properly installed. Another graphite shaft option would be the Xcaliber .355" taper tip graphite iron shaft. (AS0028)
Answered by: JimY
Date published: 2016-01-19

Does this shaft come in .335

Asked by: JeffKing1
For an iron shaft I am assuming you meant to say .355" tip size. However this shaft comes only in a .370" tip diameter.
Answered by: JimY
Date published: 2015-10-05

Can you add a Callaway adapter? Cost?

Asked by: Richf844
The Callaway adaptor CA0020 cost $39.99 and the charge to install the adaptor on a shaft is $10.00. http://www.golfworks.com/product.asp?pn=CA0020
Answered by: JimY
Date published: 2015-09-28

Do you make a G-73 series shaft in a 350 or 355T diameter.

Asked by: farmer2702
NO the G Series Iron shafts are only manufactured with a .370" parallel tip. They are not available in a .350" or .355" taper tip.
Answered by: JimY
Date published: 2015-06-08
  • 2016-12-05T07:52CST
  • bvseo_cps, prod_bvqa, vn_cps_3.4.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_5
  • loc_en_US, sid_GD0036, PRD, sort_recentAnswersFirst
  • clientName_golfworks