Graphite Design YS 6+ Graphite Wood Shaft

Graphite Design YS 6+ Graphite Wood Shaft

YS 6+, R Flex - 335 tip (65g) 3B2M
In Stock
YS 6+, S Flex - 335 tip (66g) 4B2M
YS 6+ X Flex - 335 tip (67g) 4.5B2M
YS 7+, S Flex - 335 tip (78g) 4B1H
In Stock
YS 7+, X Flex - 335 tip (79g) 4.5B1H
In Stock
1-3 $15.50
4+ $13.50
Tip & Butt Trimming
Tip Prepping

Graphite Design YS 6+ Graphite Wood Shaft

The Graphite Design YS-6+ graphite wood shaft is a proven performer on the PGA Tour in all major brands of club head styles.

  • .335" tip diameter available
  • Ultralight, mid flex point for all skill levels of golfers
  • Uses the highest grade of modulus graphite available on the market

Trimming Instructions

Graphite Design YS 6+ Graphite Wood Shaft is rated 5.0 out of 5 by 7.
Rated 5 out of 5 by from The answer I have played several different shafts on the drivers I've owned though the years always hoping that the next one would "the answer". A year ago I started using the DS-6+ stiff shaft and I have not looked back! This shaft is awesome, you don't have to wonder what you ball flight is going to look like because it is so consistant. Oh and if you want that extra yardage we all seek from time to time it will be there without have to come out of your shoes to get it. FAIRWAYS BABY!!!
Date published: 2007-10-01
Rated 5 out of 5 by from Great shaft. Very consistent shaft. Easily fitted for a variety of swing speeds.
Date published: 2015-05-25
Rated 5 out of 5 by from good control This is one of the easiest stiff shafts which I used. The distance is good on 3 wood Magregor. Confidence is good with the shaft. good directional behaviour, not afraid on a windy day and water all along the holes, to use on long holes. it seems to sort of catapault the ball a long way.
Date published: 2008-06-02
Rated 5 out of 5 by from Still a great shaft First tried the YS-6+ at a Titleist driver fitting a couple of years ago (and even then it was an old shaft) but I still haven't found another shaft that performs as well, including a number of $300 premium shafts. Extremely smooth, unbelievable value.
Date published: 2015-06-23
Rated 5 out of 5 by from YS 6+ There are certainly newer and much more expensive shafts out there, but for my money it is still very difficult to beat the YS6+. The feel is flawless and as the "engine" of the driver it more than holds its own.
Date published: 2014-05-28
Rated 5 out of 5 by from Love the feel I have changed driver heads many times but always put a YS 6? in it. Have it in my fairway wood also
Date published: 2016-07-08
Rated 5 out of 5 by from very close to the oem used by manufacturer good quality shaft,easy to work with,great color graphics
Date published: 2016-05-21
  • 2016-07-24T07:40CST
  • bvseo_cps, prod_bvrr, vn_cps_3.3.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_7
  • loc_en_US, sid_YS633WPL, PRD, sort_relevancy
  • clientName_golfworks

what would it cost to get the YS6+ driver shaft with a Taylormade R15 adaptor ready to hit? Thanks

Asked by: Johnny
This service would be an additional upcharge of $10.00 plus the cost of the shaft and adaptor. You may call customer service for help with this request or please make the request in the "special instructions" box during checkout online.
Answered by: Brent Dill
Date published: 2016-07-20

Do you trim the shaft the same when using an adapter for an adjustable club? If you were to trim a driver shaft slightly more than recommended, say, 1.5 inches instead of one inch, would it play tip stiffer? Enough to be noticable?

Asked by: flobzoom
When using a shaft adapter the tip trimming stays the same as it would for a driver that does not use a shaft adapter. The general rule of thumb with graphite shafts is that 1" is eqaul to a change of flex so tip trimming 1.5" would stiffen the shaft by approximately a flex and a half. Tipping a shaft will make it play overall stiffer not tip stiff. Overall flex will effect ball flight before tip stiffness.
Answered by: JimY
Date published: 2016-05-31

I purchased a used Callaway ft-9 i-mix that came with a ys-6+ r350.  I can not find a shaft flex marked anywhere. Is there some way to tell what the flex is?

Asked by: Dirty
The r in the r350 tells me this is an R flex.
Answered by: JimY
Date published: 2016-05-05

Can I get this shaft tipped for a Ping G 30 driver head ? I have an old Snake Eyes 10.5 T4 with this shaft in a regular flex and just killed it! 

Asked by: Fred
Yes we can set this shaft up for the Ping G30 driver.
Answered by: JimY
Date published: 2016-04-19

I installed a new YS6 Reg Shaft in my R15 TaylorMade Driver.There is a screw with a Black Round Washer on the Tipped end shaft.Does this black washer go inside the head touching the tip or outside touching the screw head?

Asked by: Kimbo
The black washer goes on the screw as shown in this picture and would go between the screw and bottom of the hosel on the outside of the head.
Answered by: JimY
Date published: 2016-03-21

If I use Graphite Design Tour AD DI X-flex in driver, then can I use YS 6+ or 7+ X-flex in hybrids&woods with performance similarities? I play Taylormade TP for driver&2h, XHot PRO for 3w, Mizuno JPX825 for 3h. Want consistent workability/spin @ 110mph+.

Asked by: Ace66
The YS7+ could make a very good fairway wood shaft but the YS6+ and 7+ are .335" tip diameter shafts that will not fit a hybrid. Most hybrids these days use a .370" tip diameter shaft. The JPX825 Hybrid uses a .370" tip diameter shaft. The GS0042 could be a good choice for this hybrid.
Answered by: JimY
Date published: 2016-03-21

I recently broke the shaft in my driver.My shaft is a Graphite Design Tour, Accuracy and Distance. It also has YS-6+ S350 on it. It is Blue in Color. Can you tell me exactly which shaft this is and if an exact replacement is available ?

Asked by: jph48
The YS633WPL S flex would be the closest replacement. The S350 tells me that this is a .350" tip diameter shaft. At one time Graphite Design did make a .350" tip diameter YS6+ but it is no longer available. You will need to use a shim to make the .335" tip diameter YS633WPL fit this driver properly. Depending on the manufacture and model of driver you have there maybe a ferrule or adaptor available. If we knew which driver you have we could make a recommendation.
Answered by: JimY
Date published: 2016-01-11

I currently play YS6+ stiff in my driver and with age (now 62), I've noticed my distance is starting to be shorter. Would changing to a YS 6+ R help to regain distance and would it be like playing a firm shaft versus a stiff?

Asked by: Eddie V
I am that age and have been playing the YS6+ R flex for a few years now. Great shaft and I would think the R flex could work well.
Answered by: JimY
Date published: 2016-01-04
  • 2016-07-24T07:50CST
  • bvseo_cps, prod_bvqa, vn_cps_3.3.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_20
  • loc_en_US, sid_YS633WPL, PRD, sort_recentAnswersFirst
  • clientName_golfworks