Graphite Design YS 6+ Graphite Wood Shaft

Graphite Design YS 6+ Graphite Wood Shaft


YS 6+, R Flex - 335 tip (65g) 3B2M
$69.00
In Stock
YS 6+, S Flex - 335 tip (66g) 4B2M
$69.00
In Stock
YS 6+ X Flex - 335 tip (67g) 4.5B2M
$69.00
In Stock
YS 7+, S Flex - 335 tip (78g) 4B1H
$69.00
In Stock
YS 7+, X Flex - 335 tip (79g) 4.5B1H
$69.00
In Stock
Pureing 
1-3 $15.50
4+ $13.50
Tip & Butt Trimming
$4.95
Tip Prepping
$2.95

Graphite Design YS 6+ Graphite Wood Shaft

The Graphite Design YS-6+ graphite wood shaft is a proven performer on the PGA Tour in all major brands of club head styles.

Features:
  • .335" tip diameter available
  • Ultralight, mid flex point for all skill levels of golfers
  • Uses the highest grade of modulus graphite available on the market

Trimming Instructions

Graphite Design YS 6+ Graphite Wood Shaft is rated 5.0 out of 5 by 8.
Rated 5 out of 5 by from The answer I have played several different shafts on the drivers I've owned though the years always hoping that the next one would "the answer". A year ago I started using the DS-6+ stiff shaft and I have not looked back! This shaft is awesome, you don't have to wonder what you ball flight is going to look like because it is so consistant. Oh and if you want that extra yardage we all seek from time to time it will be there without have to come out of your shoes to get it. FAIRWAYS BABY!!!
Date published: 2007-10-01
Rated 5 out of 5 by from Great shaft. Very consistent shaft. Easily fitted for a variety of swing speeds.
Date published: 2015-05-25
Rated 5 out of 5 by from good control This is one of the easiest stiff shafts which I used. The distance is good on 3 wood Magregor. Confidence is good with the shaft. good directional behaviour, not afraid on a windy day and water all along the holes, to use on long holes. it seems to sort of catapault the ball a long way.
Date published: 2008-06-02
Rated 5 out of 5 by from Still a great shaft First tried the YS-6+ at a Titleist driver fitting a couple of years ago (and even then it was an old shaft) but I still haven't found another shaft that performs as well, including a number of $300 premium shafts. Extremely smooth, unbelievable value.
Date published: 2015-06-23
Rated 5 out of 5 by from YS 6+ There are certainly newer and much more expensive shafts out there, but for my money it is still very difficult to beat the YS6+. The feel is flawless and as the "engine" of the driver it more than holds its own.
Date published: 2014-05-28
Rated 5 out of 5 by from Great Shaft at a Great Price! The stiff definitely plays a little softer than most stiff flex shafts...exactly what I was looking for, since I am not as young as I used to be. Shot dispersion is tighter than some other shafts I have tried.
Date published: 2016-09-12
Rated 5 out of 5 by from Love the feel I have changed driver heads many times but always put a YS 6? in it. Have it in my fairway wood also
Date published: 2016-07-08
Rated 5 out of 5 by from very close to the oem used by manufacturer good quality shaft,easy to work with,great color graphics
Date published: 2016-05-21
  • y_2016, m_12, d_2, h_11
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_8
  • loc_en_US, sid_YS633WPL, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

I currently have the Taylormade R15 and I would like to replace the shaft with the Y6. I live out of the country and will be in the USA in 3 weeks. Can this shaft be shipped ready to install on the R15 when I return from my visit? Thanks

Asked by: Gbland7424
Yes we can install the shaft into a shaft adapter for the R15 driver. TM0023 is the shaft adapter you will need for the R15 driver.
Answered by: JimY
Date published: 2016-11-29

Can you install adaptor? And also grip?

Asked by: Han
Yes we can install the shaft adapter and the grip.
Answered by: JimY
Date published: 2016-11-21

I have a ys6 shaft in my FT3 and am finally making a change to a G25 Ping. Can I reshaft it with a YS6 shaft?

Asked by: Raven
Yes the YS6 can be installed into the Ping G25 driver. The G25 driver does use a .335" tip diameter shaft.
Answered by: JimY
Date published: 2016-11-14

Can I get this made for a Adams Speedline tech ?

Asked by: flowen owens
We do not have a shaft adaptor for the Adams Speedline Tech driver. You would have to have the existing shaft adapter reshafted with this shaft. You could send the shaft with the adapter installed and we could reshaft it for you with this shaft.
Answered by: JimY
Date published: 2016-11-07

I play an X-stiff Fuji 665 in driver and Stiff Fuji motore 8.0 in FW woods. I have heard great things about these shafts. Im thinking X-stiff ys-6+ in driver and X-stiff ys-7+ in fw's. Ive read these play a little softer than stated flex is that true?

Asked by: Caleb
I can tell you that the YS6+ and YS7+ shafts do test more flexible then normal X flexes. These shafts are designed to play to their listed flex when installed into a Bore Through Wood head. Titleist used this shaft as a stock shaft in their 905 Series drivers. If you use this shaft you need to make sure to follow the trimming instructions. If you install it into a non bore through design without tip trimming per the instructions it will play at least a full flex more flexible. These shafts have a 4" parallel tip section so you do have room to do some additional tip trimming to make it play a little stiffer. I have personally played this shaft in my driver for a few years now and like it very much.
Answered by: JimY
Date published: 2016-10-03

Can someone explain that the W11 trim code means? Thanks!

Asked by: Leftee22
You will find W11 at this link and by scrolling down the page to the wood shaft trimming instructions. http://www.golfworks.com/images/art/shaft_trim_inst.pdf If you are installing this shaft into a driver you will tip trim 1" from the tip end, unless your driver is a bore through design where the shaft goes through the bottom of the clubhead then you would tip trim 0".
Answered by: JimY
Date published: 2016-09-06

Can this shaft be installed in a Taylormade aeroburner driver? If so is a shim/ adapter needed?

Asked by: Dill
The standard Taylormade Aeroburner driver is listed as a .350" hosel. This shaft is .335". You could use a shim with a standard .335 ferrule, or to make it much easier you could get a .335 shim that has a ferrule attached. As long as you shim this shaft, it will work with your driver. Check out code#BB9018 for the universal plastic shim. These work great!
Answered by: Brent Dill
Date published: 2016-08-19

I am a between R and S flex so I go usually go with S for control. I like to feel the club head and generally hit a high ball. Is this a good shaft choice if I want to lower the ball and maintaine control and distance? You play it so it has to be good. 

Asked by: Keith
It works well for me with a good ball flight, one that is not to high or to low. It is just a very good feeling shaft. Because this shaft is designed to be it's listed flex when installed into a bore through clubhead design it requires tip trimming when not installed into a bore through. You would actually tip trim it 1" for basically all of todays driver designs. This also allows you to change the flex a little if you would like. Using the S flex and only tip trimming 1/2" instead of the 1" will make the shaft play between an S and R flex. The shaft designs gives us some options for fine tuning flexes.
Answered by: JimY
Date published: 2016-08-02
  • 2016-12-03T07:58CST
  • bvseo_cps, prod_bvqa, vn_cps_3.4.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_29
  • loc_en_US, sid_YS633WPL, PRD, sort_recentAnswersFirst
  • clientName_golfworks