Graphite Design YS 6+ Graphite Wood Shaft

Graphite Design YS 6+ Graphite Wood Shaft

YS 6+, R Flex - 335 tip (65g) 3B2M
In Stock
YS 6+, S Flex - 335 tip (66g) 4B2M
YS 6+ X Flex - 335 tip (67g) 4.5B2M
In Stock
YS 7+, S Flex - 335 tip (78g) 4B1H
YS 7+, X Flex - 335 tip (79g) 4.5B1H
In Stock
1-3 $15.50
4+ $13.50
Tip & Butt Trimming
Tip Prepping

Graphite Design YS 6+ Graphite Wood Shaft

The Graphite Design YS-6+ graphite wood shaft is a proven performer on the PGA Tour in all major brands of club head styles.

  • .335" tip diameter available
  • Ultralight, mid flex point for all skill levels of golfers
  • Uses the highest grade of modulus graphite available on the market

Trimming Instructions

Graphite Design YS 6+ Graphite Wood Shaft is rated 5.0 out of 5 by 8.
Rated 5 out of 5 by from The answer I have played several different shafts on the drivers I've owned though the years always hoping that the next one would "the answer". A year ago I started using the DS-6+ stiff shaft and I have not looked back! This shaft is awesome, you don't have to wonder what you ball flight is going to look like because it is so consistant. Oh and if you want that extra yardage we all seek from time to time it will be there without have to come out of your shoes to get it. FAIRWAYS BABY!!!
Date published: 2007-10-01
Rated 5 out of 5 by from Great shaft. Very consistent shaft. Easily fitted for a variety of swing speeds.
Date published: 2015-05-25
Rated 5 out of 5 by from good control This is one of the easiest stiff shafts which I used. The distance is good on 3 wood Magregor. Confidence is good with the shaft. good directional behaviour, not afraid on a windy day and water all along the holes, to use on long holes. it seems to sort of catapault the ball a long way.
Date published: 2008-06-02
Rated 5 out of 5 by from Still a great shaft First tried the YS-6+ at a Titleist driver fitting a couple of years ago (and even then it was an old shaft) but I still haven't found another shaft that performs as well, including a number of $300 premium shafts. Extremely smooth, unbelievable value.
Date published: 2015-06-23
Rated 5 out of 5 by from YS 6+ There are certainly newer and much more expensive shafts out there, but for my money it is still very difficult to beat the YS6+. The feel is flawless and as the "engine" of the driver it more than holds its own.
Date published: 2014-05-28
Rated 5 out of 5 by from Great Shaft at a Great Price! The stiff definitely plays a little softer than most stiff flex shafts...exactly what I was looking for, since I am not as young as I used to be. Shot dispersion is tighter than some other shafts I have tried.
Date published: 2016-09-12
Rated 5 out of 5 by from Love the feel I have changed driver heads many times but always put a YS 6? in it. Have it in my fairway wood also
Date published: 2016-07-08
Rated 5 out of 5 by from very close to the oem used by manufacturer good quality shaft,easy to work with,great color graphics
Date published: 2016-05-21
  • 2016-09-30T07:48CST
  • bvseo_cps, prod_bvrr, vn_cps_3.4.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_8
  • loc_en_US, sid_YS633WPL, PRD, sort_relevancy
  • clientName_golfworks

Can someone explain that the W11 trim code means? Thanks!

Asked by: Leftee22
You will find W11 at this link and by scrolling down the page to the wood shaft trimming instructions. If you are installing this shaft into a driver you will tip trim 1" from the tip end, unless your driver is a bore through design where the shaft goes through the bottom of the clubhead then you would tip trim 0".
Answered by: JimY
Date published: 2016-09-06

Can this shaft be installed in a Taylormade aeroburner driver? If so is a shim/ adapter needed?

Asked by: Dill
The standard Taylormade Aeroburner driver is listed as a .350" hosel. This shaft is .335". You could use a shim with a standard .335 ferrule, or to make it much easier you could get a .335 shim that has a ferrule attached. As long as you shim this shaft, it will work with your driver. Check out code#BB9018 for the universal plastic shim. These work great!
Answered by: Brent Dill
Date published: 2016-08-19

I am a between R and S flex so I go usually go with S for control. I like to feel the club head and generally hit a high ball. Is this a good shaft choice if I want to lower the ball and maintaine control and distance? You play it so it has to be good. 

Asked by: Keith
It works well for me with a good ball flight, one that is not to high or to low. It is just a very good feeling shaft. Because this shaft is designed to be it's listed flex when installed into a bore through clubhead design it requires tip trimming when not installed into a bore through. You would actually tip trim it 1" for basically all of todays driver designs. This also allows you to change the flex a little if you would like. Using the S flex and only tip trimming 1/2" instead of the 1" will make the shaft play between an S and R flex. The shaft designs gives us some options for fine tuning flexes.
Answered by: JimY
Date published: 2016-08-02

Is this a low launch ( high kick ) shaft ?

Asked by: JonEbGood
It is listed as a mid/high trajectory shaft. It was always listed as a mid bend point and med/firm tip stiffness. I play this shaft in my driver and find the mid/high trajectory definition to be accurate.
Answered by: JimY
Date published: 2016-07-26

what would it cost to get the YS6+ driver shaft with a Taylormade R15 adaptor ready to hit? Thanks

Asked by: Johnny
This service would be an additional upcharge of $10.00 plus the cost of the shaft and adaptor. You may call customer service for help with this request or please make the request in the "special instructions" box during checkout online.
Answered by: Brent Dill
Date published: 2016-07-20

Do you trim the shaft the same when using an adapter for an adjustable club? If you were to trim a driver shaft slightly more than recommended, say, 1.5 inches instead of one inch, would it play tip stiffer? Enough to be noticable?

Asked by: flobzoom
When using a shaft adapter the tip trimming stays the same as it would for a driver that does not use a shaft adapter. The general rule of thumb with graphite shafts is that 1" is eqaul to a change of flex so tip trimming 1.5" would stiffen the shaft by approximately a flex and a half. Tipping a shaft will make it play overall stiffer not tip stiff. Overall flex will effect ball flight before tip stiffness.
Answered by: JimY
Date published: 2016-05-31

I purchased a used Callaway ft-9 i-mix that came with a ys-6+ r350.  I can not find a shaft flex marked anywhere. Is there some way to tell what the flex is?

Asked by: Dirty
The r in the r350 tells me this is an R flex.
Answered by: JimY
Date published: 2016-05-05

Can I get this shaft tipped for a Ping G 30 driver head ? I have an old Snake Eyes 10.5 T4 with this shaft in a regular flex and just killed it! 

Asked by: Fred
Yes we can set this shaft up for the Ping G30 driver.
Answered by: JimY
Date published: 2016-04-19
  • 2016-09-30T07:50CST
  • bvseo_cps, prod_bvqa, vn_cps_3.4.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_24
  • loc_en_US, sid_YS633WPL, PRD, sort_recentAnswersFirst
  • clientName_golfworks