Graphite Shaft Extensions

Graphite Shaft Extensions


GSE - Graphite Shaft Extender .600
$1.99
In Stock
USGE - Ultralite Graphite Shaft Extender .600
$1.99
In Stock
Shaft Extension Adhesive - 30 ml. Syringe
$5.99
In Stock

Graphite Shaft Extensions

The GolfWorks offers graphite extensions for standard or ultralite shafts. These 3" extensions are made of injection-molded graphite for strength and durability. Choose the extender that fits your shaft. Can be sanded to fit most graphite shafts.

Graphite Shaft Extensions is rated 5.0 out of 5 by 5.
Rated 5 out of 5 by from Terrific fit! Needed to lengthen a short shaft and this product Worked like a champ----easy to install!
Date published: 2015-09-10
Rated 5 out of 5 by from Aldila RIP Phenom Aldila RIP Phenom R flex is .600 I think? Any chance you could confirm this for me? Wanting to tip my shaft to stiffen it a little. Thank you!
Date published: 2016-03-15
Rated 5 out of 5 by from Extensions The price was great service was great to will buy from again thanks manny mejia
Date published: 2016-07-23
Rated 5 out of 5 by from great price I bought these to lengthen my clubs and they were great. so easy to use
Date published: 2016-07-31
Rated 5 out of 5 by from Best equipment supplier ever! Products are the best; service excellent; prices fair
Date published: 2015-06-25
  • 2016-09-26T07:43CST
  • bvseo_cps, prod_bvrr, vn_cps_3.4.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_5
  • loc_en_US, sid_GSE, PRD, sort_relevancy
  • clientName_golfworks

I would like to extend an M2 Reax 65 graphite iron shaft. Which extender would I get?

Asked by: Rickvette
Being a 65 gram weight shaft it would likely use the USGE extension. I do not know the butt diameter of the REAX 65 nor the inside diameter measurement at the butt end of the shaft to know for sure but generally the USGE fits the 65 gram weight shafts.
Answered by: JimY
Date published: 2016-09-19

the shaft in my TaylorMade M2  5 wood broke inside the grip 6 inches from the butt. Can I still use a shaft extender? Will it fit inside the narrower part of the shaft at the break which is narrower than the butt.

Asked by: excoach
No you would not want to use a shaft extension to repair this break. You need to install a new shaft.
Answered by: JimY
Date published: 2016-09-19

Would this work in my Fujikura Motore F1 shaft? Club broke under grip so need to extend by maybe 3/4 inches. Thanks 

Asked by: Ronan1990
We still had one of the 65 gram weight Motore F1 shafts in stock and the USGE extension was the one that fits. http://www.golfworks.ca/graphite-shaft-extensions/p/GSE/
Answered by: JimY
Date published: 2016-08-29

What extension  works on ping tfc-189 regular flex shaft that has been shortened

Asked by: Kennyb63
We would need to know the inside diameter measurement at the butt end of the shaft to know which shaft extension would be used. We do not have this Ping shaft to be able to get that measurement and with this shaft having been shortened we would definitely have to have that measurement.
Answered by: JimY
Date published: 2016-08-22

what is diameter of the extention that goes in the shaft?

Asked by: fuzzy
On the GSE the post that goes into the shaft measures .480" and on the USGE it measures .535". We also have the GW4000 extensions that are available in many more sizes that are listed at this link. http://www.golfworks.com/premium-graphite-shaft-extensions/p/GW4000/
Answered by: JimY
Date published: 2016-08-09

Which one is the oversize extension?  The regular is to small inside a putter? Thanks 

Asked by: barrett9090
USGE is the oversize graphite extension. If your putter has a steel shaft these graphite shaft extensions will not be large enough. For a steel shafted putter you would need the S58 or S60 depending on the putter shaft butt diameter.
Answered by: JimY
Date published: 2016-07-28

I HAVE A CALLOWAY PROJECT X 50 BLUE , STANDARD LENGTH I WOULD LIKE TO EXTEND TO 48". WHICH EXTENSION WOULD BE THE CORRECT ONE TO USE?

Asked by: RANMAN
Being a 50 gram weight shaft it should use the USGE ultralite extension. http://www.golfworks.com/graphite-shaft-extensions/p/GSE/
Answered by: JimY
Date published: 2016-07-22

I just got a set of ping graphite 101 shaft. I tried using the univrrsal graphite extension. No worky. Is their a smaller one?

Asked by: John
If these are the older Karsten 101 graphite iron shafts the GSE extension should fit. http://www.golfworks.com/graphite-shaft-extensions/p/GSE/
Answered by: JimY
Date published: 2016-07-21
  • 2016-09-26T07:50CST
  • bvseo_cps, prod_bvqa, vn_cps_3.4.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_61
  • loc_en_US, sid_GSE, PRD, sort_recentAnswersFirst
  • clientName_golfworks