Hosel Honing Wire Brush

Hosel Honing Wire Brush


Bit for Irons
$4.99
Backordered
Bit for Woods
$4.99
In Stock

Hosel Honing Wire Brush

The easiest way to clean out hosels. For use with all drills. Cleans out hosels quickly and easily and prepares them for re-assembly. We recommend that the hosel be cleaned out using a cotton swab dampened with solvent after use.

Hosel Honing Drill Bits for Woods and Irons is rated 4.625 out of 5 by 8.
Rated 5 out of 5 by from Reshafting made easy!!! As a novice club builder, I was concerned about fully cleaning the side walls and deep into the hosel, so I tried these years ago and have never looked back. Attaches easily to any drill, so the speed and depth can be controlled for unmatched hosel cleaning. Really scratches up the side walls so that you feel confident about the epoxy bond for any of your reshafting jobs.
Date published: 2015-09-24
Rated 5 out of 5 by from Works Great! Just finished an MOI build on a set of STi Irons - used the hosel brush to clean out the hosels - worked great and saved time having to deal with the sandpaper strips.
Date published: 2016-07-25
Rated 5 out of 5 by from Essential Club Building Tool. I bought two of these hosel honing brushes for reshafting jobs. I recently pulled shafts from a set of irons and used a brush to remove epoxy residue. It does a great job of cleaning the inside of the hosel to prepare for reshafting. I don't know about durability yet since I have only done the one job but the brush held up well to a fair amount of use. Recommended.
Date published: 2016-06-13
Rated 4 out of 5 by from Hosel Honing Wire Brush Does exactly what is described and with good results. My only recommendation is to put wire bristles at the tip of the tool to get at the bottom of the hosel with better results.
Date published: 2015-12-05
Rated 5 out of 5 by from Great items It was a pleasure doing business with you one of my items was broke, called GW and a replacement was sent out ASAP had it the next day excellent!
Date published: 2015-08-14
Rated 3 out of 5 by from Good and fast These work really good, but they wear out too fast to be so expensive!!!
Date published: 2015-11-25
Rated 5 out of 5 by from Good Good luck with your own. This tool clean the glue perfectly.
Date published: 2016-04-27
Rated 5 out of 5 by from Hosel brush Great brush, well constructed, and good value. Thank you.
Date published: 2015-08-30
  • 2016-07-28T07:52CST
  • bvseo_cps, prod_bvrr, vn_cps_3.3.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_8
  • loc_en_US, sid_GW1060, PRD, sort_relevancy
  • clientName_golfworks

Are the bristles stainless steel, carbon steel, etc?

Asked by: Insidetheleather
Stainless Steel.
Answered by: JimY
Date published: 2016-06-06

Can you use this product to clean out the epoxy inside a taper tip steel shaft?

Asked by: mjr
No these will not fit inside the tip of a steel shaft. I personally use a drill bit to clean out epoxy from inside the tip of a steel shaft.
Answered by: JimY
Date published: 2016-05-02

When will the bit for Irons be shipped out if backordered?

Asked by: Ricky
We have them in stock here in the US so I would think Canada should have them shortly. To be sure it would be best to contact GolfWorks Canada and they will be able to help you.
Answered by: JimY
Date published: 2016-03-21

Can the .370 iron brush be used on .355 taper iron hosels?

Asked by: NJDon
Yes it will work.
Answered by: JimY
Date published: 2015-11-23

do they come with 2 bits, iron and woods

Asked by: bill70
No they come individually. You would need to order for both woods and irons.
Answered by: JimY
Date published: 2015-07-27

What is the difference between the iron and the wood drill bit? Is the brush part made of a different material?

Asked by: Nn11
The difference is the size. .335 for woods, .370 for irons.
Answered by: GW2002
Date published: 2015-04-21

about how many irons would you say one of these brushes will do?

Asked by: dragonslayer
Difficult to say exactly how many, but in our shop I would say we have done several hundred heads. You will need to clean the wire occasionally.
Answered by: GW2002
Date published: 2014-09-19
  • 2016-07-28T07:54CST
  • bvseo_cps, prod_bvqa, vn_cps_3.3.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_7
  • loc_en_US, sid_GW1060, PRD, sort_recentAnswersFirst
  • clientName_golfworks