KBS Tour 90 Taper Tip Steel Iron Shafts

KBS Tour 90 Taper Tip Steel Iron Shafts


Tour 90 R Flex - #2 Iron - 355 tip 3B2H
$29.95
In Stock
Tour 90 R Flex - #3 Iron - 355 tip 3B2H
$29.95
In Stock
Tour 90 R Flex - #4 Iron - 355 tip 3B2H
$29.95
In Stock
Tour 90 R Flex - #5 Iron - 355 tip 3B2H
$29.95
In Stock
Tour 90 R Flex - #6 Iron - 355 tip 3B2H
$29.95
Backordered
Tour 90 R Flex - #7 Iron - 355 tip 3B2H
$29.95
In Stock
Tour 90 R Flex - #8 Iron - 355 tip 3B2H
$29.95
In Stock
Tour 90 R Flex - #9 Iron - 355 tip 3B2H
$29.95
In Stock
Tour 90 R Flex - #W Wedge - 355 tip 3B2H
$29.95
In Stock
Tour 90 S Flex - #2 Iron - 355 tip 4B1H
$29.95
In Stock
Tour 90 S Flex - #3 Iron - 355 tip 4B1H
$29.95
In Stock
Tour 90 S Flex - #4 Iron - 355 tip 4B1H
$29.95
In Stock
Tour 90 S Flex - #5 Iron - 355 tip 4B1H
$29.95
In Stock
Tour 90 S Flex - #6 Iron - 355 tip 4B1H
$29.95
In Stock
Tour 90 S Flex - #7 Iron - 355 tip 4B1H
$29.95
In Stock
Tour 90 S Flex - #8 Iron - 355 tip 4B1H
$29.95
In Stock
Tour 90 S Flex - #9 Iron - 355 tip 4B1H
$29.95
In Stock
Tour 90 S Flex - #W Wedge - 355 tip 4B1H
$29.95
Backordered
Pureing 
1-3 $15.50
4+ $13.50
Tip & Butt Trimming
$4.95
Tip Prepping
$2.95

KBS Tour 90 Taper Tip Steel Iron Shafts

The KBS Tour 90 Taper Tip steel iron shaft offers tour performance in a lighter golf shaft.

Features:
  • .355" taper tip diameter
  • Designed with Moment of Inertia (MOI) analysis to increase shaft stability from the grip to the club head
  • Proportional mass and radius reduction during step progression increases shaft performance
  • Available in half inch increments 41.5" - 37.5"

Trimming Instructions

KBS Trimming Instructions

KBS Tour 90 Taper Tip Steel Iron Shaft Specifications

KBS Tour 90 Taper Tip Steel Iron Shafts is rated 5.0 out of 5 by 5.
Rated 5 out of 5 by from unbelieveable performance had these shafts installed on my new taylormade tour preferred irons in regular and I cant believe how much distance I have gained. I am 65 and have been playing over 50+ years and was considering graphite until I tried these. I have added 10-15 yards and they are practically point and shoot for me. I also had winngrip lite midsize and the feel and feedback is the best I have had since hitting my forged macgregors many years ago. I can also control the height of my shots with these shafts by flattening my down swing a bit. this is an added feature and you better players will appreciate this.
Date published: 2014-11-10
Rated 5 out of 5 by from great performing shaft I was fitted recently for a set of Mizuno JPX 850 cast irons. After trying 3 different recommended shafts, the shaft that gave me optimum performance was the KBS Tour shaft. The only problem was that it was too heavy for me at 110 grams. So I reshafted my 2 wedges and 9 iron with the KBS Tour 90 shaft which has the same characteristics as the Tour shaft but 20 grams lighter. I'm glad I did, easier to swing for a 63 year old and my shot dispersion is a lot tighter. I recommend this shaft.
Date published: 2015-06-16
Rated 5 out of 5 by from KBS delivers These shafts do everything claimed for them. Replaced DGSL and achieved lower total weights and swingweights reduced by a point in long irons while increasing length. Best of all smooth controlled feel. They inspire confidence particularly in long irons.
Date published: 2011-04-15
Rated 5 out of 5 by from KBS C Taper 90 lite shafts These shafts are a great addition to the KBS products. Lighter than the standard C Taper, they perform as well, and allow for an increase in swing speed. Hitting your target is easy with these shafts.
Date published: 2015-10-07
Rated 5 out of 5 by from Light but effective This shaft is light enough for "slower swingers" yet feels firm and gives good results.
Date published: 2015-07-12
  • y_2016, m_12, d_9, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_5
  • loc_en_US, sid_FS0023, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

 I have KBS taylormade 90  fst shafts How can I check if there stiff or regular  I don't  know I would like to match the shaft they were given to me

Asked by: Boog
On the KBS Tour 90 shaft bands we have the flex is marked in the lower right hand corner. If you do not have the shaft bands or by chance they are not marked, I think some of their earlier bands were not marked, can you give me a measurement from the back of the heel to the first step on the shaft of one of your irons. If I have this measurement there is a good chance I can figure out which flex you have. The easiest way to take this measurement is to set the iron in the playing position sitting on the center of the sole and use a ruler right behind and against the shaft and measure from the ground up to the first step. If you can tell me which make and model or irons you have that will also help.
Answered by: JimY
Date published: 2016-12-02

what is the difference between iron parallels and iron tapers ?

Asked by: fg54728
Generally with a set of parallel tip shafts they will all start at the same raw length. In the case of the KBS Tour 90 they start at 41.25". As you tip and butt cut each shaft for each club number the shafts will get lighter from the longest club to the shortest club. With the taper tip version the shafts start at different lengths because there is a shaft for each club. Even though these shafts start at different lengths they still all weight the same. We call that a constant weight shaft. The taper tip shaft will be a little heavier then the parallel tip shaft and generally the taper tip shaft will be slightly more flexible then the parallel tip shaft in the tip section. In a true blind test it would be hard for a player to pick out the difference between a taper and parallel tip shaft.
Answered by: JimY
Date published: 2016-09-12

I ordered one shaft from Golfsmith to replace the XP115 in my MP H5 3 iron: the KBS Tour 90 in stiff and 39 inches.  Golfsmith didn't list which iron this was for.  The clubheads are .355 tapered.  I think I ordered the 5 iron shaft length?

Asked by: Stevo74
Thank you.  I changed the order.  I note even the golfworks.com does not list these shafts by length, only by iron number.  Difficult to get the correct shaft, but I believe I've got it now! Thanks again.
Answered by: Stevo74
Date published: 2016-08-16

are all the KBS shafts the same length until cut

Asked by: Tom
The FS0023 KBS Tour 90 Taper tip shafts are a different length for each iron. The lengths are listed for each iron. The .370" parallel tip KBS Tour 90 (FS0024) iron shafts will all start at the same length and then are cut for installation. Many of the KBS shafts are available in both .355" taper tip and .370" parallel tip. With taper tips there is always a different length shaft for each iron and with their parallel tips they are cut for each club. http://www.golfworks.com/kbs-tour-90-steel-iron-shafts/p/FS0024/
Answered by: JimY
Date published: 2016-07-22

hello.buy a new club at taylomade. and in my fitthing session the computer suggere for me m2 by taylomade and shaft KBStour-v regular. taylormade dont have this shaf he propose KBStour steel regulard, this my quetion ,this a same speciffication shaft. 

Asked by: ben la haye
No, the Tour V is a lighter weight shaft then the Tour. Here are the links for both shafts from our web site. Scroll down towards the bottom of the page and you will be able to read the specifications for both shafts. http://www.golfworks.ca/product.asp?pn=FS0036 http://www.golfworks.ca/product.asp?pn=FS0018
Answered by: JimY
Date published: 2016-02-26

Hello; I have kbs tour 90's parallel tips in my irons and they frequence at 5.3 to 5.5.  I need tour taper tip for my new irons but I don't know which flex would be close to matching my parallel tips. I can soft or hard step but which flex would work best

Asked by: Putterboy
If you started with the R flex in the Tour 90 parallel tip you will likely start with the R flex in the taper tip as well. From there you may need to soft step or hard step depending on what finished length and swingweight you have assembled these clubs. Also any differences in hosel length and bore depth between the 2 sets of heads would be a factor in the frequency as well. It would help to know if the clubmaker ended up doing basically the normal recommended tip trimming or if he had to adjust it quite a bit to get in the 5.3 to 5.5 range.
Answered by: JimY
Date published: 2015-12-15

Hello;  Can I get 2 kbs tour 355 shafts that are un cut?  I want to tip trim mysel to my desired frequency.    Thanks

Asked by: 3puttpar
When you order the shafts they come raw length. With taper tip shafts there is no trip trimming recommended. If you tip trim them they will not longer fit into the tapered hosel bore. .355" taper tip shafts are only .355" at the very tip end. They will taper out to approximately .370" where the shaft exits the top of the hosel. Trimming to frequency is done using .370" parallel tip shafts where the shaft tip is .370" and stays that size in most case up to the first step.
Answered by: JimY
Date published: 2015-12-15

What are the actual lengths for the KBS 90 R shafts. The item description gives two different ranges and the itemized list gives no lengths.

Asked by: Alex0273
The KBS Tour 90 iron shafts come in both a .355" taper tip option (36.5" - 40.5") or a .370" parallel tip option (41.25"). Depending on which manufactures irons you have and which model they are they could use either the .355" or .370" version. For the .355" taper tip version it starts with the 40.5" length for the 2 iron and progresses down in 1/2" increments to the wedges using the 36.5" raw length shaft. With the taper tips you purchase the shaft for each club number install them and butt cut to the finished length. With the .370" parallel tip you would need to tip trim for each club number install and then butt cut to the finished length. Again which ones you purchase depends on which irons you have and whether they are designed to use the .355" or .370" shafts.
Answered by: JimY
Date published: 2015-09-23
  • 2016-12-10T08:11CST
  • bvseo_cps, prod_bvqa, vn_cps_3.4.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_11
  • loc_en_US, sid_FS0023, PRD, sort_recentAnswersFirst
  • clientName_golfworks