KBS Tour C-Taper Steel Iron Shafts

KBS Tour C-Taper Steel Iron Shafts


R Flex 37.5" (9i, PW) - .355 tip (110g) 3B1H
$36.95
In Stock
R Flex 38.0" (8i) - .355 tip (110g) 3B1H
$36.95
In Stock
R Flex 38.5" (7i) - .355 tip (110g) 3B1H
$36.95
In Stock
R Flex 39.0" (6i) - .355 tip (110g) 3B1H
$36.95
In Stock
R Flex 39.5" (5i) - .355 tip (110g) 3B1H
$36.95
In Stock
R Flex 40.0" (4i) - .355 tip (110g) 3B1H
$36.95
In Stock
R Flex 40.5" (3i) - .355 tip (110g) 3B1H
$36.95
In Stock
R Flex 41.0" (2i) - .355 tip (110g) 3B1H
$36.95
In Stock
R+ Flex 37.5" (9i, PW) - .355 tip (115g) 3.5B1H
$36.95
In Stock
R+ Flex 38.0" (8i) - .355 tip (115g) 3.5B1H
$36.95
In Stock
R+ Flex 38.5" (7i) - .355 tip (115g) 3.5B1H
$36.95
In Stock
R+ Flex 39.0" (6i) - .355 tip (115g) 3.5B1H
$36.95
In Stock
R+ Flex 39.5" (5i) - .355 tip (115g) 3.5B1H
$36.95
In Stock
R+ Flex 40.0" (4i) - .355 tip (115g) 3.5B1H
$36.95
In Stock
R+ Flex 40.5" (3i) - .355 tip (115g) 3.5B1H
$36.95
In Stock
R+ Flex 41.5" (2i) - .355 tip (115g) 3.5B1H
$36.95
In Stock
S Flex 37.5" (9i, PW) - .355 tip (120g) 4C1H
$36.95
Backordered
S Flex 38.0" (8i) - .355 tip (120g) 4C1H
$36.95
In Stock
S Flex 38.5" (7i) - .355 tip (120g) 4C1H
$36.95
In Stock
S Flex 39.0" (6i) - .355 tip (120g) 4C1H
$36.95
In Stock
S Flex 39.5" (5i) - .355 tip (120g) 4C1H
$36.95
In Stock
S Flex 40.0" (4i) - .355 tip (120g) 4C1H
$36.95
In Stock
S Flex 40.5" (3i) - .355 tip (120g) 4C1H
$36.95
In Stock
S Flex 41.0" (2i) - .355 tip (120g) 4C1H
$36.95
In Stock
S+ Flex 37.5" (9i, PW) - .355 tip (125g) 4.5C1H
$36.95
In Stock
S+ Flex 38.0" (8i) - . 355 tip (125g) 4.5C1H
$36.95
In Stock
S+ Flex 38.5" (7i) - .355 tip (125g) 4.5C1H
$36.95
In Stock
S+ Flex 39.0" (6i) - .355 tip (125g) 4.5C1H
$36.95
In Stock
S+ Flex 39.5" (5i) - .355 tip (125g) 4.5C1H
$36.95
In Stock
S+ Flex 40.0" (4i) - .355 tip (125g) 4.5C1H
$36.95
In Stock
S+ Flex 40.5" (3i) - .355 tip (125g) 4.5C1H
$36.95
In Stock
S+ Flex 41.0" (2i) - .355 tip (125g) 4.5C1H
$36.95
In Stock
X Flex 37.5" (9i, PW) - .355 tip (130g) 5C1H
$36.95
In Stock
X Flex 38.0" (8i) - .355 tip (130g) 5C1H
$36.95
In Stock
X Flex 38.5" (7i) - .355 tip (130g) 5C1H
$36.95
In Stock
X Flex 39.0" (6i) - .355 tip (130g) 5C1H
$36.95
In Stock
X Flex 39.5" (5i) - .355 tip (130g) 5C1H
$36.95
In Stock
X Flex 40.0" (4i) - .355 tip (130g) 5C1H
$36.95
In Stock
X Flex 40.5" (3i) - .355 tip (130g) 5C1H
$36.95
In Stock
X Flex 41.0" (2i) - .355 tip (130g) 5C1H
$36.95
In Stock
Pureing 
1-3 $15.50
4+ $13.50
Tip & Butt Trimming
$4.95
Tip Prepping
$2.95

KBS Tour C-Taper Steel Iron Shafts

Inspired from Tour player feedback, designed to complement the KBS Tour shaft's exceptional shot control with performance targeting players with a fast swing tempo.

Features:
  • Designed to impart lower launch and less ball spin.
  • Enhanced for Custom Tuning

Trimming Instructions

KBS Tour C-Taper Shaft Specs

KBS Tour C-Taper Steel Iron Shafts is rated 5.0 out of 5 by 9.
Rated 5 out of 5 by from Not Just for hard swingers The C-Taper shafts were designed to fit a very specific group of players who hit the ball very high due to very high swing speeds - for these elite players the C-Tapers was designed for them. Those of us outside of this group the shaft will still help lower trajectory and correct our balloned shots (due to swing fault of flipping rather than due to high ball speeds). However we often make the mistake of just buying the same flex in the C-Taper from what we've been using and ends up with a shaft that is way too stiff - the C-Tapers is about 1/3 of a flex stiffer than comparable shafts. KBS recommends soft stepping C-Tapers once or twice to make it more playable for us average joes. I first started playing C-Taper S+ straight in, felt it required very good swings to get anything out of it, then went to PXi (too light), DGS300 (too much spin), and now back to C-Taper S+ but soft stepped twice (bring flex down from 6.7 to 6.1 which is closer to a standard S-flex KBS T
Date published: 2013-10-25
Rated 5 out of 5 by from Bionic shafts I normally play X100 TT but I put an S+ in a callaway apex CF16 8 iron as an experiment and the distance gain was shocking. Somehow this shaft, in this flex, in this head are like magic for me. My irons are actually bent 2 degrees weak from Apex standard lofts to more traditional lofts and somehow this 8 iron is carrying 180-185 yards with range balls. It's Freaky. I really don't understand it. My "normal" 8 iron distance with nearly any club has been 165 for decades. I'm not sure why so many people say they feel harsh, but to me they feel quite soft and smooth. I put a sensicore in it and it's wonderful. I just bought the rest of the shafts to switch out my whole set. They do run a bit stiff so be careful with fitting. Now I have to figure out if I need another wedge because these are so freakishly long.
Date published: 2016-11-06
Rated 5 out of 5 by from unreal i have about 10 rounds on these shafts in the s+ flex. i have played every shaft on the market, and these have no comparison. better feel, longer, awesome penetrating ballflight, and the tightest dispersion ive ever seen. picked up 10+ yds per club over the rifle 6.0's ive played for the last 5 yrs.
Date published: 2013-10-21
Rated 5 out of 5 by from Great for low handicaps I'm handicap +1,5 (euro) and been playing KBS Tour X 130g for many years. Decided to change one of my golf set with the C-taper 130 X (apex pro). I'm happy that I did, I've lost some feeling but working the ball, the flight is more stable, more deep and less spin, consequently more distance. (5-8 yards). I would not recommend this shaft if you are looking for feeling, when you miss, you will feel it...
Date published: 2015-10-07
Rated 5 out of 5 by from Get Fit I started with the new KBS C-Taper shafts in the stiff + and was so excited to play these amazing new shafts that made such claims as the 5% gain distance, 5% lower traq. and 5% less spin. I am currently a 4.7 handicap that plays at least twice a week here in North Scottsdale. Driver speed 105 good for around 275-280 yards. Iron play is pretty consistent on most days. I have played x-100's, Px 5.5 and Px 6.0, and KBS tour stiff over the last couple of years. What I found is that these play stiffer than you think they will. I used the KBS fitting system on their website and KBS suggested I use the stiff +. So about $250.00 later I had some in my Miura CB501's. They require a lot of attention to hit well, you can't just swing away and have fun. If I put a great swing on the shot the shaft performed as advertised, but anything less than perfect had adverse affects on the outcome. After several rounds I conceded defeat and went back to my KBS tour stiffs, but it s
Date published: 2012-04-30
Rated 5 out of 5 by from 100% agree with the above poster I 100% agree with the comments by Mike Williford as above. I was fit for the X-stiff (6 iron swing speed 95-98mph with ball speed 130/driver SS 110-118, .25 inch short, 2degrees flat) and have played x100 and PX6.5. I think he is right on the money saying that they require attention and commitment- I feel these play stiffer than x100 and PX6.5 and as far as the 5%/5%/5%, I would definitely agree with the 5% less spin (this was the reason I went with the Ctaper)- for me drop and stop- no sucking back- 3-4-5 iron maybe 5 to 8 feet of roll out. As for the 5% lower trajectory and 5% more distance- not so much- but this is for ME and may not apply to you. I have them in 712/AP2 and I had to de-loft (1-1.5 degrees)my 6-PW to get back to my normal distances and lower the ball flight- I was losing distance when the ball ballooned farther down range and fell straight out of the sky- granted, Titleist has weaker lofts than say Mizuno.... As a test I ordered a S+ shaft and p
Date published: 2012-06-04
Rated 5 out of 5 by from COMPARABLE ALTERNATIVE This was a replacement shaft for a friend. The quality was very good, well within specifications posted and made replacement with similar characteristics simple. Very good alternative to tour rated shafts.
Date published: 2015-06-27
Rated 5 out of 5 by from KBS C- TAPER S+125g SHAFTS WHAT GREAT SHAFTS ,HAD MY LOCAL PRO FIT NEW KBS C-TAPER SHAFTS S+ 125g SHAFTS TO MY TITLEIST 714MB HEADS,AWESOME LOOK AND FEEL WITH GREATER PENETRATING BALL FLIGHT THAT I WAS LOOKING FOR
Date published: 2015-12-30
  • y_2016, m_12, d_2, h_14
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_9
  • loc_en_US, sid_FS0026, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

Hello. This is Kazu. How are you? I have TaylorMade TOUR PREFERRED MB Irons. I am wondering if these KBS shafts will fit into them. Thank you.

Asked by: Kazuhiro
Yes the C-taper FS0026 shafts will fit the Tour Preferred MB irons.
Answered by: JimY
Date published: 2016-11-28

Will the c taper 9/PW work for the gap and sand wedge, or is there a special shaft for those? I am after the same characteristics of low flight, less spin with these shafts and want to replace my current Dynamic Gold S200 shafts in those two clubs.

Asked by: Andy
With the C-Taper shafts the 37.5" raw length shaft is for the 9 iron and all the wedges. KBS does not make a specific wedge shaft in the C-Tapers.
Answered by: JimY
Date published: 2016-11-22

If my clubs are +1/2 inch over standard is that the same as one soft step?  Also, how does the S+ compare flex wise to the project X 6.0? 

Asked by: VinceWP
No not really. At +1/2" the shaft flex really does not change much if at all. The butt end of the shaft is the stiffest end of the shaft so increasing the length by 1/2" at the butt end increases the length of the butt section and makes the shaft a little stiffer. The increase of 3 swingweights created by the 1/2" of length offset that stiffness increase and the shaft flex basically stays the same. In our shaft test data the C-Taper S+ tested stiffer then the Project X 6.0 over the full length of the shaft. The C-Taper S matched closer to the 6.0 with the exception that the C-Taper S was still stiffer in the tip section.
Answered by: JimY
Date published: 2016-10-20

What is the difference between the c-taper stiff 120 wedge shaft and the custom 130 stiff shaft? Pros or cons 1 vs the other? I have c-taper 120 stiffs in my clevelands. I'm looking to replace shafts in my vokey sm6's?? Thank you

Asked by: Raha17
The weight of the C-Taper at 120 grams is lighter then the Custom at 130 grams. The Custom wedge shaft is designed to create a mid trajectory and the C-Taper is designed to produce a low trajectory and lower spin rate.
Answered by: JimY
Date published: 2016-09-26

can I pay for overnight shipping?

Asked by: Nick
Yes you can pay for overnight shipping. With an online order check the next day box or you can call our Customer Service department with your order at 1-800-848-8358 and they will be glad to help you with your order.
Answered by: JimY
Date published: 2016-08-25

I have shafts in my irons which are 1" longer than normal. Do i just order by length vs the iron listed for? Thank you

Asked by: vrocket
The listed raw lengths of these shafts is long enough to handle the 1" long length that you use. You can just order the recommended shafts for each club number, install them and you will probably still have to cut to your finished length from the butt end.
Answered by: JimY
Date published: 2016-07-26

Kbs tour c taper 105 regular  not the lite be ok my driver swing speed 95 to 105 ?

Asked by: Mag07
We do not have any information on the C Taper 105 shafts. So far they have been mostly a Taylor Made only product. It may work fine but one thing I have seen from testing KBS shafts is that if they make a lighter weight version it will play more flexible then the standard weight version in the same flex.
Answered by: JimY
Date published: 2016-05-11

I just bought a golf shaft from you folks and I may not have gotten the correct one. What I needed was the 4 iron  , The order number was 9877540

Asked by: albert
The 4 iron shaft is the 40" raw length shaft for the C-Taper. You can check on your order by contacting Customer Service at 1-800-848-8358 or by email at golfworks@golfworks.com.
Answered by: JimY
Date published: 2016-04-28
  • 2016-12-03T08:02CST
  • bvseo_cps, prod_bvqa, vn_cps_3.4.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_20
  • loc_en_US, sid_FS0026, PRD, sort_recentAnswersFirst
  • clientName_golfworks