Lead Counterweights for Putters

Lead Counterweights for Putters


Lead Putter Counterweight - 40 grams
$2.59
In Stock
Lead Putter Counterweight - 60 grams
$3.59
In Stock
Lead Putter Counterweight - 80 grams
$4.59
In Stock

Lead Counterweights for Putters

With the new USGA rules on anchoring putters soon to be in effect, these weights allow you to extend a standard putter several inches with a shaft extension and a long or mid length putter grip to duplicate the total weight and performance of a long or belly putter. Available in 40, 60 and 80 gram weight options

Lead Counterweights for Putters is rated 5.0 out of 5 by 1.
Rated 5 out of 5 by from Excellent. Item as described, quick shipment, easy transaction. Thanks!!!
Date published: 2016-05-23
  • y_2016, m_12, d_10, h_1
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_1
  • loc_en_US, sid_CW40, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

what is the diameter of the 80 gram putter

Asked by: rock
The outside diameter on the 80 gram weight, and all of these weights, measures .540".
Answered by: JimY
Date published: 2016-11-03

Hello! Do these weights fit into .580 or .600 shafts?

Asked by: Lorry
These weights can fit both .580 and .600 shafts. When using them with a .580 shaft, some light sanding may be required on the lip that sits on top of the shaft. You will also want to epoxy these in once you have the weight picked out for your preference.
Answered by: Brent Dill
Date published: 2016-09-21

How do I know how much weight to add to a putter? AZlso, can lead weights be added to super soft grips? Will I need a special tool?

Asked by: grandjacdk38
The amount of weight depends on personal preference. I would take into account the length, head weight and swingweight of your putter. The heavier the head, longer the length and heavier the swingweight the more weight can be added. The weights are installed prior to installing the grip so no special tools are needed. I would recommend using a little epoxy to secure the weights prior to installing the grip.
Answered by: Admin
Date published: 2016-07-28

how do you know what counterweight to use

Asked by: Glenne713
An honest answer is that you have to be willing to experiment with these weights to see what might work best for you. With the Super Stroke Counter Core grips they use a 50 gram weight. Somewhere in that weight range seems to be a common starting point.
Answered by: JimY
Date published: 2016-03-28

I ordered the 40 gram weight - I wanted to insert it into the shaft of my putter, not lengthen the putter itself.  Is this possible?

Asked by: patrick16
There is a shoulder at the top of this weight that keeps the weight from going down inside the shaft and holds the weight in place. The shoulder adds approximately 1/8" in length to your putter over what it measures without the weight installed. You could sand down the outside diameter of the shoulder and the weight will go down inside the shaft but then you have nothing to hold the weight in place. You would have to epoxy a cork inside the butt end of the shaft to keep the weight in the position you want. It is also best to epoxy the weight in place as well to keep it from rattling.
Answered by: JimY
Date published: 2015-11-30

do you install these with epoxy like with shaft extensions?

Asked by: Jramz
Yes you would install these with epoxy just as with shaft extensions.
Answered by: JimY
Date published: 2015-07-20

what is the OD of these weights?

Asked by: Bud
Approximately .535" to .540". Being lead there is a little bit of a tolerance.
Answered by: JimY
Date published: 2015-06-11

how to install weights in putter grip

Asked by: bondow bob
You would have to remove the putter grip first, then install the weight into the butt end of the shaft and reinstall the grip.
Answered by: JimY
Date published: 2015-05-04
  • 2016-12-10T08:09CST
  • bvseo_cps, prod_bvqa, vn_cps_3.4.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_16
  • loc_en_US, sid_CW40, PRD, sort_recentAnswersFirst
  • clientName_golfworks