Maltby KE4 S Iron Heads

Maltby KE4 S Iron Heads


Maltby KE4 S Iron - #4 Iron -
$21.99
In Stock
Maltby KE4 S Iron - #5 Iron -
$21.99
In Stock
Maltby KE4 S Iron - #6 Iron -
$21.99
In Stock
Maltby KE4 S Iron - #7 Iron -
$21.99
In Stock
Maltby KE4 S Iron - #8 Iron -
$21.99
In Stock
Maltby KE4 S Iron - #9 Iron -
$21.99
In Stock
Maltby KE4 S Iron - Pitching Wedge -
$21.99
In Stock
Maltby KE4 S Iron - Gap Wedge -
$21.99
In Stock

Maltby KE4 S Iron Heads

Maltby KE4 S Iron Views

  • Ultra Game Improvement, cavity back design with category leading MPF Playability making the KE4 S irons one of the most forgiving iron designs ever.
  • Extremely low center of gravity produces solid shots for a variety of swing types, especially those players with a sweeping type swing.
  • Aluminum and polymer 3 dimensional cavity medallion provides shock dampening at impact for an incredible feel, even on off center hits.
  • KE4 Weight Adjustable System allows for customization. Additional Maltby Triangle Weights available for fine tuning feel - 2, 4, 6, 8, 10, 12 and 14 gram weights available. (MA002GT)
  • Recommended ferrule (52PI)
  • Product Code = MA0254

Maltby KE4 S Iron Clubhead Specifications

Maltby KE4 S Iron Heads is rated 4.555555555555555 out of 5 by 9.
Rated 5 out of 5 by from Solid Performance Bought a 7 iron head some time back. Have tried it with several steel and graphite shafts. With a UST IRN graphite shaft this club is very easy to hit and long. It has a nice medium ball flight. Good off center hit performance. A high quality club for sure. This head is more compact than other super game improvement heads out there, and the sole width is in the medium range. If you want a giant head or a very wide sole look elsewhere. Despite being more compact than some of those SGI or GI shovels, I find it just as easy to hit. I have played some TaylorMade RBZ irons over the last year, and this head performs as well or better than the TaylorMades.
Date published: 2015-04-26
Rated 5 out of 5 by from Sweet! I have used many of the Maltby iron products the last several years and I was quite suprised with the feel of these irons.When struck dead center the feel is SWEET! When struck off center a little they are still solid, bit the feedback is enough to let you know you missed the shot. I assembled them with the axe tour x 95g iron shaft in a stiff flex and golf pride cp 2 pro grip. After adjusting to the (modern) jacked up lofts, I have hit some of the best iron shots I have hit in years. Make no mistake these irons are long, accurate and easy to hit in addition to an ALMOST forged feel. The appearance is not clunky at all at and honestly very eye appealing in the bag. Do not be afraid to give these a try!
Date published: 2015-06-02
Rated 5 out of 5 by from ONE OF THE BEST THEY HAVE EVER DESIGNED I PUT TOGETHER A SET 6--GW OF THESE SEVERAL MONTHS AGO AND HAVE FOUND THEM TO BE THE BEST OF THE KE 4 LOT. COMPLETE ADJUSTABILITY WITH WEIGHTS. I BOUGHT A FEW EXTRA WEIGHTS AND MADE ALL THE HEADS MATCH TO A GREAT MOI SET. I LOVE THE FACT THA MALTBY RATES THE HEADS WITH A PLAYABILITY FACTOR AND USE THAT WHEN PICKING A HEAD TO TEST. TRIED DIFFERENT SHAFTS AND FINALLY GOT A GOOD MATCH FOR ME. I PLAY GOLF EVERY DAY.
Date published: 2014-12-23
Rated 5 out of 5 by from My first custom clubs I recently retired and promised myself a set of proper tools. Chose these after hitting a test club. These feel great...straight and long. Anxious to see if the clubs and more practice change my game dramatically.
Date published: 2015-05-19
Rated 5 out of 5 by from Great value I mainly use hybrids and wanted to go to R flex in 7-PW. Instead of paying top dollar for a set and not using all of them - I use hybrids 6 & up - I had GW make these. I have played GW heads before and was very happy. The assembled clubs have gotten great remarks from others. Love the feel and playability of these.
Date published: 2016-03-17
Rated 2 out of 5 by from Gap wedge Only bought gap wedge head to try out. Very disappointed! I have given this club a good try on practice tee and course and have tried to adjust feel with lead tape. No feel to it. "Clunky" might best discribe it's feel, especially chipping. No longer in my bag.
Date published: 2015-10-15
Rated 4 out of 5 by from Great idea for altering swing weigh Probably the only set of iron heads in the market that allows an easy way to alter the swing weight with out dismantling the club. Would recommend that the screw in head weights be hardened more as the triangle inserts tend to mark or distort easily from use.
Date published: 2016-08-10
Rated 5 out of 5 by from Long, straight, forgiving, soft feel Built a set 5-GW with XP105 shafts for a friend. He is tall and needed them fitted 1 inch longer than standard. He wanted to try a moment-of-inertia (MOI) matched set, but we were not sure what his optimum MOI would be with the longer shafts. We initially built a test 7 iron to the required length. We also ordered a full set of the removable weights. On the driving range, we started with 2g + 2g in the heel and toe and recorded his hit with impact tape on the face, then increased the weights to 4g + 2g, 4g + 4g etc. It took a little trial and error testing to find the optimum weights that maximized his on center hits. We then built the rest of the set using 3/8 inch length increments relative to the 7 iron test club. We had a spreadsheet to estimate the optimum weights for the other heads, but range tested all of them just to confirm our estimates. The results were phenomenal: consistently straight, high, long, pleasant soft feel at impact and astounding forgiveness on off-center hits. My friend is very happy with his set after using it for about 6 months and still finds it hard to believe how good a set he got for a fraction of the cost compared to OEM clubs.
Date published: 2016-07-31
  • 2016-08-27T08:15CST
  • bvseo_cps, prod_bvrr, vn_cps_3.3.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_9
  • loc_en_US, sid_MA0254, PRD, sort_relevancy
  • clientName_golfworks

I purchased a set of these left  handed heads and built them with no problem. The person I built them for tells me the weights are loose. Is this normal and should I be concerned about them. Is there anything I can do to tighten them?

Asked by: Loubo
The weights will eventually back themselves out over time. We recommend they be tightened once assembled as they are only factory set. If you would like to make them more secure, you can use plumbers tape on the threads when tightening them. if you want them to be permanent, you can epoxy them into the heads.
Answered by: Brent Dill
Date published: 2016-08-17

Hi again, before I order - what would your opinion be on a matching GW / SW to blend well with this set. I would like to stick to just two clubs ? I am concerned the matching GW of this set is only 48 deg ? one of the ST-I sets or specialist wedges ?

Asked by: NZ Pete
The lofts on the KE4 S irons can be adjusted up to 2 degrees. That may help you with using the GW from this set. You could also look at our M Series + Wedges (MA0257) or our Maltby Design Wedges (MA0265). In the M Series + wedges we offer lofts from 50 degrees up to 62 degrees and in the Maltby Design Wedges from 52 degrees up to 60 degrees. The different color codes for both of these wedge designs it to help players of different skill levels. http://www.golfworks.com/maltby-m-series-wedges/p/MA0257/ http://www.golfworks.com/maltby-design-multi-grind-wedges/p/MA0265/
Answered by: JimY
Date published: 2016-08-03

Hi there, Can you build these with no weights at all installed for a teenage junior golfer to lighten them up ?  Thanks in advance

Asked by: NZ Pete
Yes we can assemble these irons without the weights installed to keep them lighter.
Answered by: JimY
Date published: 2016-08-02

if I have the loft 1 deg. strong. how much does the bounce go down?

Asked by: ozzie626
It is basically a 1 to 1 ratio. If you reduce the loft 1 degree the loft will be decrease by 1 degree.
Answered by: Admin
Date published: 2016-07-29

Can these be ordered pre-adjusted? Like for example -2* flat?

Asked by: Song Dog
Yes these can be ordered pre-adjusted for loft and lie and we can adjust them up to 2 degrees. There is an additional charge of $4.95 per club for this service.
Answered by: JimY
Date published: 2016-07-25

What is the MPF rating on this club head

Asked by: steve
It is Ultra Game Improvement with 863 MPF Points. http://www.golfworks.com/images/art/MPF_MALTBY.pdf
Answered by: JimY
Date published: 2016-06-22

With Ke4 S iron head, can I use heavier weight at toe and lighter weight at heel to help with slice ball flight.   

Asked by: Edd
To help correct a slice you would actually put the heavier weight in the heel and the lighter weight in the toe. Putting the heavier weight in the toe will slow down the rotation of the clubhead through impact and cause the face to stay open. The reality is that these weights are to close to the club face to have anything but a very minor effect on correcting a slice or hook.
Answered by: JimY
Date published: 2016-06-20

hi,i was wondering what weight in grams are the club weights that come with theses irons.

Asked by: chaz
The KE4 S irons come with two 4 gram weights installed.
Answered by: JimY
Date published: 2016-06-10
  • 2016-08-27T08:06CST
  • bvseo_cps, prod_bvqa, vn_cps_3.3.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_45
  • loc_en_US, sid_MA0254, PRD, sort_recentAnswersFirst
  • clientName_golfworks