Maltby KE4 Tour Hybrids

Maltby KE4 Tour Hybrids


Maltby KE4 Tour Hybrid - H3
$34.99
In Stock
Maltby KE4 Tour Hybrid - H4
$34.99
In Stock
Maltby KE4 Tour Hybrid - H5
$34.99
In Stock

Maltby KE4 Tour Hybrids

Maltby KE4 Tour Hybrid Views

The KE4 Tour Hybrids feature stand alone performance but were also designed to compliment both the KE4 Tour and KE4 Forged iron models by providing an easy to hit replacement for long and mid irons. With a slightly deeper face height, square set up and decreased head volume preferred by traditionalist and better players, the KE4 Tour hybrids still provide unparalleled performance benefiting any caliber of player. Regardless of the face height or volume, Advanced Shell Technology insures the proper mass distribution for optimum performance. Dual Sole Rails and the adjustable weight screw locates mass low and rearward, increasing MOI and lowering the vertical center of gravity (.785) well below the golf balls equator for increased stability, forgiveness and distance control.

Designed for modern standard playing lengths (40.5- 19, 40 22, 39.5 25) the KE4 Tours interchangeable weights allow for multiple playing lengths and shaft weights to ensure precision gap fitting when transitioning from irons to fairway woods.

  • Precision Cast from 17-4 Stainless Steel
  • Dual Sole Rails and sole radius enhance ground contact.
  • Satin black PVD finish for durability.
  • Available in 3 lofts 19 (H3), 22 (H4) and 25 (H5) to replace hard to hit long irons providing more consistency in trajectory, distance and dispersion.
  • .370 bore diameter.
  • Product Code = MA0217

Maltby KE4 Tour Hybrids is rated 4.9375 out of 5 by 16.
Rated 5 out of 5 by from MALTBY KE4 TOUR HYBRID I AM A CUSTOM CLUBMAKER, I ORDERED THIS FOR A CUSTOMER WITH THE CLUB PAK. THE SHAFT IS A PERFECT FIT AND PERFORMS PERFECTLY. I WAS SO IMPRESSED WITH THE PERFORMANCE OF THIS CLUB I ORDERED ON FOR MYSELF. THE MALTBY MPF SHAFT THAT COMES WITH THE CLUB PAK PERFORMS SO WELL I DO NOT BELIEVE THERE COULD BE ANY IMPROVEMENT EVEN WITH A MORE EXPENSIVE SHAFT.THESE SHAFTS RUN A LITTLE STIFFER THAN WHAT THEY ARE MARKED. THERE IS NOTHING LOST ON DISTANCE OR CONTROL. BOTH CLUB PAKS WERE ORDERED WITH THE A FLEX SHAFT ON MY DIGI FLEX THE CPMS WERE READING LIKE A REGULAR FLEX SHAFT. IF ANY ONE WANTS QUALITY AT A REASONABLE PRICE THIS IS THE HEAD SHAFT COMBO TO ORDER.
Date published: 2015-07-16
Rated 5 out of 5 by from Easiest Hybrid I've hit I bought this club after I was moving away from my Adams and looking at Ping hybrids. I picked this up for the price and it's resemblence to the Ping hybrids. I shafted it with an Xcaliber Tour Hybrid shaft and it the easiest hybrid I have hit to date, I've tested all the major brands too. I got the #3 19* and with the shaft it has turned out to be an easy 230 club for me. The face is dead square at address and has to my a little deeper face which allows me to hit down on it. I would reccomend this club to anyone looking for a forgiving yet players looking hybrid.
Date published: 2012-11-23
Rated 5 out of 5 by from Easy Distance I ordered the KE4 Tour Hybrid club pak in #4 22* with the Maltby shaft. The first thing that comes to mind is easy distance. It's designed to replace the 3iron and performs brilliantly. It flies dead straight and comes down very soft. Shot dispertion is minimal. I am a very low single digit hp and was reluctant to use the so called low buck shaft in the pak but I am thouroghly impressed. Distance falls in right around 220 with little to no drama. It is also very easy to work the ball in either direction, will be ordering the 3 and the 5 as well. Easy distance.
Date published: 2012-06-09
Rated 5 out of 5 by from tried hybrids, hated them...love this one Bought the Maltby pack to replace my 5-6 iron and put it together at Christmas. Spined and FLOed the shaft as I do on all my clubs. First time I hit it was a little longer than my 5 iron and very solid in feel. Have hit it several times afterward and just gets better and better. Solid feel, can work the ball either way, grip down 1" and it travels slightly longer than my 6 iron did. But much better out of the rough than my 5 or 6. Love it.
Date published: 2016-01-24
Rated 5 out of 5 by from Solid feel I assembled the 19 degree with a True Temper S300 at 40.5" length, and the first day I hit it, I was very impressed! The heavy head had a very solid feel with about a 220 yard distance. It also hits easily out of the rough. This club will replace my 2 iron and 7 wood and I will use this instead of my driver on shorter and tighter holes. I only wish they made this in a lower degree loft to replace my driver completely.
Date published: 2013-07-19
Rated 5 out of 5 by from Nice job! I bought the H3 and H4, put them together with Rifle 4.5 steel using traditional iron lengths and they perform beautifully. The heads are neither too large nor too shallow and perform well from different lies. I am very pleased with them and highly recommend them.
Date published: 2013-01-28
Rated 5 out of 5 by from KE4 Tour Ive tried a lot of hybrid, utility, long irons and this is by far the best I've used in a long time. great weight in the head, it doesn't want to hook like most hybrids. I putt a FST 115 X in it and the ball flight is great for windy conditions and calm days.
Date published: 2013-09-10
Rated 5 out of 5 by from Great Hybrid head! The KE4 Tour Hybrid heads are very, very impressive! I have the 4 & 5...but the 3H has replaced my T913h in my bag. It also replaced my 3i and my 5w. It is quite versatile and handles each role with ease. I especially like the sound it makes as the ball is struck.
Date published: 2016-06-12
  • 2016-07-28T07:51CST
  • bvseo_cps, prod_bvrr, vn_cps_3.3.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_16
  • loc_en_US, sid_MA0217, PRD, sort_relevancy
  • clientName_golfworks

can you bend this to a 64 degree lie?

Asked by: Tony
No the KE4 Tour Hybrids cannot be adjusted to 64 degrees.
Answered by: JimY
Date published: 2016-07-11

If I purchase this head and a specific shaft (not offered in a PAK), can I have the club assembled to my specs with the different shaft? How do I order that in the comments section?

Asked by: Chris
You can order any head, shaft and grip combination and have them assembled to your specs. You would simply need to leave detailed assembly instructions in the note section of the order and be sure to provide us with good contact information in case we have any questions.
Answered by: GW2002
Date published: 2016-06-03

can a 16g weight be added instead of the default 4g weight?and how much will that be?i dont mind paying as my clubs are usually 1inch shorter and that will usually lose 6 swing weights

Asked by: Philbert
14 grams is the heaviest weight we offer. The KE4 Tour comes with a 6 gram weight installed. As for the pricing questions you would have to contact Customer Service at golfworks@golfworks.com.
Answered by: JimY
Date published: 2016-05-25

On the Matby KE4 series - are they all 24 degrees - I am looking for a 22 and 20 - does Maltby make these degrees ?

Asked by: Joe Rockhead
The KE4 Tour Hybrid is available in 19 (3), 22 (4), and 25 (5) degrees. The KE4 ST-H Hybrid is available in 20 (3) and 24 (4). At the following two links you can scroll down the page to the specification box to see all the specifications for these hybrids. http://www.golfworks.com/maltby-ke4-tour-hybrids/p/MA0217/ http://www.golfworks.com/ke4-st-h-hybrids/p/MA0253/
Answered by: JimY
Date published: 2016-05-23

Good evening,  I would like to know if this hybrid head and the ust mamiya axis blue hybrid shaft would be a good match. Also how much would it cost to build this set up, would also like to pure the shaft and have a Pure dtx grip. Thanks in advance 

Asked by: Jose
The UST Axivcore Blue Hybrid shaft could match well with the KE4 Tour Hybrid as long as the shaft specifications fit you needs. KE4 Tour Hybrid (MA0217) $34.99 UST Axivcore Hybrid Blue (US0043) $39.99 Pure DTX Standard Size Grip (PU0015) $5.79 Shaft Puring (PUREIN) $15.50 Assembly Charge $10.00 That total is $106.27 for the club assembled and you would have shipping charges.
Answered by: JimY
Date published: 2016-03-28

How do I get you to manufacture me a KE4 Tour hybrid head in a 6H 28 degree?

Asked by: DudeWheresMyCode
We cannot manufacture just one and at this time we do not have any plans on adding a 6H or 28 degree.
Answered by: JimY
Date published: 2016-02-23

What would it take to get Maltby to make me a 6H version @ 28 or 29 degrees?

Asked by: DudeWheresMyCode
I will pass along your request. We have offered higher lofted hybrids in the past but they just never sold that well for us. I know they seem to becoming a little more popular so possibly we might offer another one in the future. However I know of no plans in the works at this time.
Answered by: JimY
Date published: 2016-02-23

Does this come with a headcover and what ferrule is recommended?  Thank you. 

Asked by: Kdog
No it does not come with the headcover but the headcover is available. http://www.golfworks.com/product.asp?pn=MA0234 We recommned the 60PI ferrule for this clubhead. http://www.golfworks.com/product.asp_Q_pn_E_60PI
Answered by: JimY
Date published: 2015-08-17
  • 2016-07-28T08:02CST
  • bvseo_cps, prod_bvqa, vn_cps_3.3.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_20
  • loc_en_US, sid_MA0217, PRD, sort_recentAnswersFirst
  • clientName_golfworks