Maltby L-Tech Graphite Wood Shafts

Maltby L-Tech Graphite Wood Shafts


A Flex 45" - .335 tip (65g) 1D3S
$18.99
In Stock
L Flex 45" - .335 tip (63g) 1D3S
$18.99
In Stock
LL Flex 45" - .335 tip (60g) 2D3S
$18.99
In Stock
Pureing 
1-3 $15.50
4+ $13.50
Tip & Butt Trimming
$4.95
Tip Prepping
$2.95

Maltby L-Tech Graphite Wood Shafts

Features:
  • Designed specifically for women with three distinct flexes for ultimate custom fitting:
  • Soft Flex (LL): For 25+ handicap players
  • Medium Flex (L): 15-30
  • Firm Flex (A): Handicaps of 20 and below

Trimming Instructions

Maltby

Maltby L-Tech Graphite Wood Shafts is rated 4.7 out of 5 by 3.
Rated 5 out of 5 by from Correct Flex My wife has been playing with A flex fairway shafts for decades, this spring we noticed her shots were consistently lower and slightly right. I replaced her 7w and 9w with the LTech 60 shaft using the L flex; both the launch angle and direction returned to normal. Another nice option which I have not seen with other shafts is an LL flex for a super slow swing speed.
Date published: 2015-06-07
Rated 5 out of 5 by from Great senior shaft Great shaft for golfers whos swings are slowing down. Installed in 3-4 generation old 3 & 5 woods. Easily launches shots with good to better than before distance with consistant ball flight. Solid feel. Put your macho in a drawer and put these in your clubs.
Date published: 2015-12-01
Rated 4 out of 5 by from Useful in two ways I bought the shaft as one option for club fitting, specifically for women. I attached it using the club conex system to an LTech driver.However, as I tried it to demonstrate, I found that I hit it pretty well. I have a slow swing speed and have begun using Senior Flex shafts. I am thinking of just assembling a driver for me using this shaft as well.
Date published: 2016-08-23
  • y_2016, m_12, d_2, h_9
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_3
  • loc_en_US, sid_MA0208, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

Hello, would you explain the cosmetics of this shaft, only have a snapshot of it...is the bottom of the shaft blue or does it return to a silver color? Trying to match a set of clubs that is silver. Thanks!

Asked by: JT27
The top and bottom parts of the shaft are blue. The section where the silk screen is located is the only silver part. You can see the bottom section of the shaft at this link for our LTech drivers. http://www.golfworks.com/maltby-ltech-driver-pak/p/PMA0240/
Answered by: JimY
Date published: 2016-11-29

Will this shaft work for Cobra Fly Z Woman Hybrid 5H-6H?  It will be used by a Junior 10 year old girl.  I would like the finish club length to be 36".  When ordering it's asking about Pureing, Butt and Tip Trimming, and Tip Prep.  Please advice.

Asked by: CeeIzee
Yes the LTech Wood shafts will fit the Cobra Fly Z Women's Hybrids. Cobra did use a .335" tip diameter shaft in these Hybrids. Shaft Puring is a process to identify the most stable plane of oscillation of a shaft. Shafts are not perfectly round or straight and having the shaft Pured and aligning it during installation will make it play as if it is perfectly round and straight and create a better pattern of on center hits. Here is a link to their web site where you can see more about the process. http://sstpure.com/ Butt and Tip Trimming is if you want us to prepare these shaft for you. We will do the necessary tip trimming, sand the tip and butt cut the shaft to the finished length you want the clubs to be. Tip Prep is just preparing the tip end of the shaft. We do the necessary tip trimming and sand the tip of the shaft. You would still need to cut the shaft to their finished length once the shafts are installed.
Answered by: JimY
Date published: 2016-11-15

Looking for 11pc, 370 straight or tapered shaft 55-65G to replace Callaway X22's steel irons. What choices available? Any thing in a blue-grey- black tones in Aldila or equal?

Asked by: Walter
You could use the UST Recoil 450/460 (US0095) or Recoil 65 (US0100). The Aldalite (AL0062) and the Xcaliber Tour SL (AS0031).
Answered by: JimY
Date published: 2016-10-10

Will this shafts fit a big bertha v series?  And do you think it will be good for a 7 year old girl?  Or do you have something more flexible.  I'm planning on cutting it a few inches to adjust for her height?

Asked by: Buyer
Yes the LTech wood shaft will fit the Big Bertha V Series. It does use a .335" tip diameter shaft. We would suggest using the LL flex as it is the most flexible and more flexible then a normal ladies shaft.
Answered by: JimY
Date published: 2016-01-11

do you have tip 350 shaft in this model?

Asked by: premadasa
No we do not manufacture the L Tech wood shafts with a .350" tip diameter. Depending on what heads you would be installing these into you should be able to shim a .335" shaft tip to fit the .350" hosel bore using either the manufactures adaptor or a seperate adaptor or shim. If you tell us the model of clubhead you have we can make a recommendation of the correct adaptor if available.
Answered by: JimY
Date published: 2015-11-17

Do you have MA 209 and MA 208 Flex LL? I will need 14 pieces of MA209 and 6 pieces of MA 208?

Asked by: Mohammed
No problem we have both of these in stock.
Answered by: JimY
Date published: 2015-11-04

Looking for a shaft recommendation for newer 9 year old grandson to make a beginner set. Driver, hybrid or two, 7 iron, 9 iron, PW. FYI, he grabbed my wife's Calloway with pink NV shaft and although too long of club hit it straight and about 80 yds.

Asked by: Bodirt
  • 2016-12-02T07:54CST
  • bvseo_cps, prod_bvqa, vn_cps_3.4.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_7
  • loc_en_US, sid_MA0208, PRD, sort_recentAnswersFirst
  • clientName_golfworks