Maltby MMB-17 Forged Iron Heads

Maltby MMB-17 Forged Iron Heads

MMB-17 Forged Iron Head - #3 Iron
In Stock
MMB-17 Forged Iron Head - #4 Iron
In Stock
MMB-17 Forged Iron Head - #5 Iron
In Stock
MMB-17 Forged Iron Head - #6 Iron
In Stock
MMB-17 Forged Iron Head - #7 Iron
In Stock
MMB-17 Forged Iron Head - #8 Iron
In Stock
MMB-17 Forged Iron Head - #9 Iron
In Stock
MMB-17 Forged Iron Head - Pitching Wedge
In Stock
MMB-17 Forged Iron Head - Gap Wedge
In Stock

Maltby MMB-17 Forged Iron Heads

MMB-17 Forged Iron Views

  • Satin chrome anti glare finish.
  • Progressively designed “Blade” optimizes shot trajectories from the long irons to the short irons
  • “Weight relief pocket” and inverted muscle design in 3 thru 7 iron allow for correct c.g. location to maximize playability
  • Tungsten toe weighting in the long irons (3,4,5) further improves stability and forgiveness
  • Traditionally designed short irons (8 thru PW,GW) provide the “controlled” trajectories preferred by better players
  • Offset and top line designed to appeal to purists wanting a traditional, solid appearance at address
  • MG (multi-groove) U-Groove Technology improves consistency in trajectory and spin.
  • Manufactured from 8620 Carbon Steel for soft feel and adjustability
  • Conforms to the rules of golf
  • Recommended ferrule – 74PI
  • Product Code = MA0226

Maltby MMB-17 Forged Iron Heads is rated 4.846153846153846 out of 5 by 13.
Rated 4 out of 5 by from Great Clubs I have had two sets of Maltby MMB's. I had the original MMB's that were stolen along with my car and got the MMB-17's as the replacement set. I originally played a Honma PP 727 muscle back blade. The play-ability with these clubs is awesome. I can work the ball, well as much as balls allow you to these days. Additionally, they perform well in all conditions and are extremely forgiving with off center shots. Because they perform so well you don't get the same shocking feedback you would with traditional blades, but that is why you bought these right? My only complaint is the top line is double the size of my pp-727's and are also bigger than my old MMB's (still have the 5 iron, wasn't in the bag when stolen). If it came with a smaller top-line they would be a 10, right now I give them an 8.75 for that reason alone.
Date published: 2015-12-06
Rated 5 out of 5 by from Preeeeetty Great looking irons. I know a lot of people want to do away with the offset, but I prefer it. I went with the 74PI ferrule (all black) and kind of regret it. I think the pictured one - I think it's the 70PI? - looks better, but it's up to you. Shots out of the center are effortless. I installed 85 grams XCaliber TourX Stiff shafts to keep the distance more in line with newer clubs on the shelf. My driver swing speed is about 105, and I hit the 7 iron in this set n the 155-165 range, which is right where I want it. And even though you shouldn't ever rate something on bad shots, it might be good to know that strikes *way* in the heel or right off the toe sound... off. (I'm talking almost shank it or almost not on the grooves) With the shafts I installed it almost sounds like I'm hitting something hard with a stick or piece of wood. So, try not to do that. :)
Date published: 2016-04-22
Rated 4 out of 5 by from Great clubs but maybe a slight adjustment Great clubs, have had these fitted with KBS Tour and they are great. If I ever where to advice a change to this clubhead it would be to make the top line the same as the TE`s and the same with the offset. That would make it look even more like a real players club and probably still keep most of it MPF points..? A great iron for most golfers
Date published: 2013-06-23
Rated 5 out of 5 by from Very live I had to wait for these but I am glad I did. Initially I did not like them, but after getting the lie set correctly I am hitting them straight and consistently getting 5-10 extra yards throughout the set. Mis-hits do not penalize me any more than my previous clubs, and a hit in the center of the face feels effortless. I love the clean lines of this club.
Date published: 2013-07-31
Rated 5 out of 5 by from Excellent product Heads feel great, nice soft feeling at impact. I'm able to work the ball both ways consistently and they are nice and forgiving. The weight relief in the long irons helps get the ball up in the air nicely. Even on off center hits, I dont feel like I'm losing a tremendous amount of distance. Awesome clubs!
Date published: 2015-01-20
Rated 5 out of 5 by from Great Irons Great Iron. Got them with the TT Dynamic Gold shaft in 7-GW paired with 4-6 TE irons. Top lines are little different, but swing weight, lofts and feel matches perfectly. Was looking for a progressive set and built my own. Soft feel, consistent yardages - great clubs - very, very happy.
Date published: 2015-03-03
Rated 5 out of 5 by from Easy Hitting!!!! Decided to try with Grafattack R shaft........7 iron. Started just to get the feel hitting knockdown one half shots and I was actually reaching 165 with ease.....I really like the look of the club also......but, most importantly they have good feel and feedback is good. The sweet spot is not to tight in my mind. If you swing this club easy you get big rewards. I will be playing them 5-PW from now on. I have always played Hogan forged, these feel better.
Date published: 2015-09-06
Rated 5 out of 5 by from Everything the DMB and TE irons aren't! I have played other TE Maltby irons but sold those as they were just too numb feeling - impossible to tell where on the clubface I hit it. Sure, incredibly forgiving, but didn't help my game. These MMB 17s don't have that problem - they give you JUST enough feedback that you can adjust your swing, but yet they are super forgiving. My only wish is that they were also offered in the black color of the DMBs.
Date published: 2015-07-14
  • 2016-07-28T07:51CST
  • bvseo_cps, prod_bvrr, vn_cps_3.3.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_13
  • loc_en_US, sid_MA0226, PRD, sort_relevancy
  • clientName_golfworks

Àany discount for a full set of iron heads?

Asked by: Benny
Generally we will not discount full sets of heads unless they are being discontinued. There are currently no discounts on these iron heads.
Answered by: JimY
Date published: 2016-06-28

Hi. What kind of Graphite Shaft Do you recomended for this Irons?

Asked by: Vidbas Golf
There are multiple options. Players that have bought this model with graphite have used the Aerotech product, the Recoil product by UST, the Rogue Pro Iron by Aldila and the Xcaliber Tour X graphite iron shafts. There are various shaft flex and weight options, so be sure you choose the correct weight and flex for your game.
Answered by: GW2002
Date published: 2016-06-23

Does this pw have a graphite or fiberglass shaft/ I,m 78 yearold and need a lighter shaft..

Asked by: JIm
The code MA0226 is for the clubhead only not an assembled club. You can install a graphite shaft into the PW to keep it lighter. A shaft like the Xcaliber (AS0023) is a good inexpensive graphite shaft that would match well with this head. The new AldaLite (AL0062) graphite iron shaft is a little bit lighter then the Xcaliber could be another good choice.
Answered by: JimY
Date published: 2016-06-22

What image the dimensions of these heads? Looking for a large hitting area on the face of a forged iron set. 

Asked by: Kip
Scroll down the page at this link to the black specification box and you will see all the specifications for these irons. All the dimensions for this head are listed there.
Answered by: JimY
Date published: 2016-06-06


Asked by: JASON
Yes the MMB-17 irons can be adjusted 2 degrees upright and no there is not a matching 60 degree lob wedge for this set of irons. You might look at our MS+ Series Wedges (MA0257) or Maltby Design Wedges (MA0265) for a 60 degree wedge.
Answered by: JimY
Date published: 2016-06-01

Does Golfworks makme any iron head sets that include a #1 iron and a #2 iron ?

Asked by: Rick
We do not manufacture an iron head with a 1 or 2 iron these days and have not made those for a number of years. We do offer the KE4 Tour HDI Hybrid driving irons (MA0238) which we have had very good feedback.
Answered by: JimY
Date published: 2016-05-23

do you make a sand wedge in the "MMB-17 iron head

Asked by: Uncle Dave
No we do not manufacture an MMB-17 Sandwedge.
Answered by: JimY
Date published: 2016-05-04

I have previously made two sets of the MPC forged undercut cavity blades for my son and I, are these heads approximately the same size or different in size (and by how much)?

Asked by: coach4Him
The MPC blade length and the MMB-17 blade length are the same, so these two models are basically the same size and will look the same size at address.
Answered by: GW2002
Date published: 2016-04-27
  • 2016-07-28T08:01CST
  • bvseo_cps, prod_bvqa, vn_cps_3.3.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_60
  • loc_en_US, sid_MA0226, PRD, sort_recentAnswersFirst
  • clientName_golfworks