Maltby MPF Distance Graphite Wood Shafts

Maltby MPF Distance Graphite Wood Shafts


A Flex 46" - .335 tip (55g) 2D3S
$34.99
In Stock
R Flex 46" - .335 tip (60g) 3B3M
$34.99
In Stock
S Flex 46" - .335 tip (65g) 4B2M
$34.99
In Stock
Pureing 
1-3 $15.50
4+ $13.50
Tip & Butt Trimming
$4.95
Tip Prepping
$2.95

Maltby MPF Distance Graphite Wood Shafts

Features:
  • Tip structure and flex profile specifically designed to optimize distance
  • Redesigned for improved flex and weight matching.
  • 100% frequency tested in both 0 and 90 planes

Trimming Instructions

Maltby

Maltby MPF Distance Graphite Wood Shafts is rated 4.8 out of 5 by 7.
Rated 5 out of 5 by from Great shaft for the price I bought these shafts about a month ago and installed them on my "metals." After the first round to get familiar with their characteristics, I am enjoying playing with the new shafts. They do give me more distance, straighter shots and feel light and comfortable.
Date published: 2015-09-10
Rated 5 out of 5 by from Best Possible Value and Performance I continue to be impressed with the TheGolfWorks shafts.
Date published: 2015-05-23
Rated 4 out of 5 by from Nice Stick I bought this shaft to put into a TaylorMade Burner 2 Superfast 9.5 degree driver. I did this for a pal and he likes the club now that it has a stiff shaft.
Date published: 2015-11-08
Rated 4 out of 5 by from Fine Shaft Installed it into a Nike VR-S str8 fit. Now I am longer and straighter than my buddies. A good replacement for the OEM shaft.
Date published: 2015-07-17
Rated 5 out of 5 by from MPF S- Flex Driver Shaft Increased club head speed so had to increase flex none better than MPF for price and performance
Date published: 2016-11-30
Rated 5 out of 5 by from Quality products The small parts arrived but they're no good with out the shaft can get an update on the backorderd shaft
Date published: 2016-08-06
Rated 5 out of 5 by from feel and responsiveness Nice balance. Feel was great on impact with very favorable feedback.
Date published: 2015-08-24
  • y_2016, m_12, d_9, h_16
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_7
  • loc_en_US, sid_MA0248, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

What is meant by "100% frequency tested in both 0° and 90° planes" on description of this shaft?

Asked by: Don
The shaft manufacture does a frequency oscillation test on these shafts to identify a consistent oscillation plane. They mark this plane with a white line on the butt end of the shaft. They then rotate the shaft 90 degrees and mark the shaft with a red line at the butt end of the shaft. When you assemble you put the Red line on the top of the shaft and it puts the white line in a position that will be facing the target which is the stable oscillation plane. It is done to make the shaft play more consistent.
Answered by: JimY
Date published: 2016-12-07

Will this club work in Taylormade SLDR 460?

Asked by: Wtkold
The SLDR 460 driver used a .350" tip diameter shaft. You can install the MPF Distance but you will need to use a new shaft adapter (TM0023) that fits the .335" tip size shaft. http://www.golfworks.com/taylormade-m1-m2-r-15-sldr-shaft-adaptor/p/TM0023/
Answered by: JimY
Date published: 2016-12-02

Does Maltby carry a driver/shaft combination that would perform similar to a Callaway 10.5 deg fusion driver with a 44.5 inch UST recoil ES 450 56 gram shaft?

Asked by: Dennis
The MPF Distance wood shaft could be a good choice to match up to the spec's of the Recoil ES 450 shaft that is being made for Callaway. For drivers clubhead either the KE4 ST-2 (MA0244) or STw (MA0266) in 10.5 degrees loft. With the Callaway head being a combination of titanium and composite material it will have a little muted sound. The STw would be closer to this sound and feel then the KE4 ST-2 driver, which will have a little louder sound.
Answered by: JimY
Date published: 2016-11-15

Can you compare the quality and performance characteristics of the equivalent driver and iron stiff flex-paderson imrt Kevlar, Mitsubishi kuro kage HDP and Maltby graphite distance. Driver ss 100mph. Mated to dBm I and PI cast vs forged Maltby driver.

Asked by: Dennis
Depending on which IMRT driver shaft you are looking at they have different playing characteristics. The 860 TP Tour S flex is a low trajectory shaft. The 972 S flex (PK0006) is a mid trajectory shaft and the 860 (PK0001) is also a mid trajectory shaft that is a little heavier and has a little more torque then the 972. The Mitsubishi Black HBP 2nd Gen (MR0044) is a mid trajectory shaft with a higher balance point and weight and torque spec's closer to the 972 (PK0006). The Maltby MPF Distance (MA0248) S flex shaft is a lighter weight shaft and a mid trajectory shaft. Quality wise these are all very good. I have not had much chance to work with the Paderson shafts as they are newer but both the Kuro Kage HBP and MPF Distance shafts have been very good for us. We do not offer the MPF Distance shaft in an iron shaft these days and because we offer Club Paks with the Kuro Kage iron shaft we have had very good feedback from this shaft.
Answered by: JimY
Date published: 2016-10-31

Cobra 9 degree deep face driver. Grandson (6'4" 25 years old) used it. Original shaft broke at hozel. I drilled out hozel to about 1 1/4 ". Seems like diameter of hozel is .354 not sure. What shaft should a young tiger learning golf use?

Asked by: Carl
We do still offer the Aldila NV shaft with a .350" tip diameter. The shaft design could work well for him. We have both the 65 and 75 gram weight version. http://www.golfworks.com/aldila-nv-graphite-wood-shaft/p/1205W/
Answered by: JimY
Date published: 2016-10-24

I just bought a shaft for a 7 iron and one for a 3 hybrid. Can't find the tip trimming instructions for them. Where do I get the instructions?

Asked by: WGS
Check on the corresponding item page of the shaft. The trim codes are published about half way down the page with the rest of the specs. In that same area there is a link to the trimming instructions. You can also click this link below for the trimming chart. http://www.golfworks.com/images/art/shaft_trim_inst.pdf
Answered by: Brent Dill
Date published: 2016-10-10

Do you have various shafts built already with different tips to try out? I have a M2 with an R flex and I need at least a S. Good strikes are low draws/hooks right now and struggling to get height and solid strike.   

Asked by: Travis
No we do not have any other shafts made up for the M2 driver. We just have the stock Fujikura shafts that come installed in the M2 driver. The stock shafts generally play a little more flexible then normal and they are listed in the 50 gram weight range. Which might be to light for you.
Answered by: JimY
Date published: 2016-08-25

I am looking to reshaft a Callaway Mini. Had a 60 g driver shaft but light sw (C7.5) at 43.75" with 52g grip. Is a driver shaft required and would the MPF work? Or MPF Fairway a better option? Like higher sw and increased trajectory.

Asked by: Wedgemaster
A fairway shaft could be used but will play stiffer in a driver because the driver clubhead weight is lighter then a 3 wood and will make the shaft play stiffer. I never have talked with anyone who had much success using a fairway wood shaft in a driver but it does not mean it could not work. It takes a 9 gram change of shaft weight to change a club 1 swingweight so the fairway wood shaft might give you 2 more swingweights. This is one of those things you have to be willing to experiment with to find out if it will work for you.
Answered by: JimY
Date published: 2016-08-01
  • 2016-12-10T08:07CST
  • bvseo_cps, prod_bvqa, vn_cps_3.4.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_23
  • loc_en_US, sid_MA0248, PRD, sort_recentAnswersFirst
  • clientName_golfworks