Maltby MPF Graphite Iron Shafts

Maltby MPF Graphite Iron Shafts


A Flex 41" - .370 tip (67g) 2D3S
$17.99
Backordered
R Flex 41" - .370 tip (75g) 3B3M
$17.99
In Stock
S Flex 41" - .370 tip (85g) 4B2M
$17.99
In Stock
Pureing 
1-3 $15.50
4+ $13.50
Tip & Butt Trimming
$4.95
Tip Prepping
$2.95

Maltby MPF Graphite Iron Shafts

Features:
  • Tip structure and design provide stability and consistency
  • Designed for the mid to low handicap player seeking more distance and control.

Trimming Instructions

Maltby

Maltby MPF Graphite Iron Shafts is rated 5.0 out of 5 by 1.
Rated 5 out of 5 by from all flex & club group versatility I have adopted this shaft line as my shops house graphite shaft.
Date published: 2016-10-01
  • y_2016, m_12, d_2, h_11
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_1
  • loc_en_US, sid_MA0251, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

Will these shafts fit the Maltbie DBM Iron Heads? If so what ferrules would you recommend?

Asked by: Dennis
Yes the MPF graphite iron shafts will fit the DBM irons. We recommend the 64PI ferrule with these irons or I would use the 74PI myself.
Answered by: JimY
Date published: 2016-11-28

Will this shaft fit a taylor made 2.0 super fast driver?

Asked by: Joe
No MA0251 is an iron shaft and will not fit the driver. We have the MPF Distance Wood shaft (MA0248) that could be installed into the 2.0 Superfast Taylor Made driver. The Superfast 2.0 Driver did use a .350" tip diameter shaft so you will need to use the BB9008 adapter to size the .350" hosel bore down to .335" so that you can install this shaft. http://www.golfworks.com/maltby-mpf-distance-graphite-wood-shafts/p/MA0248/ http://www.golfworks.com/taylormade-r5-r7-burner-and-super-quad-adaptor/p/BB9008/
Answered by: JimY
Date published: 2016-11-15

need to replace a ping G2 L 9 iron shaft , I believe it is a .355 diameter tip. Need a good replament graphite shaft (cheap) Can You Help?

Asked by: Big Guy
If your L means Ladies flex there are no .355" taper tip L flex shafts available. None of the manufactures make a .355" taper tip L flex shaft for the aftermarket. The only option we would have would be to special order a UST Recoil 450 (US0095) from UST with a .355" taper tip. Our least expensive .355" taper tip graphite shaft is the Xcaliber (AS0028) but it is only available in R and S flexes. We have the 9 iron shaft (36.5") in stock in the S flex but are backordered on the R flex and likely will not have them until mid January 2017.
Answered by: JimY
Date published: 2016-11-14

I need a tapered graphite .355 shaft, do they make this type shaft?

Asked by: ewb1228
No the MPF irons shafts are not manufactured in a .355" taper tip. I would recommend the Xcaliber (AS0028) which is a .355" taper tip and a very good inexpensive shaft. http://www.golfworks.com/axe-xcaliber-taper-tip-graphite-iron-shafts/p/AS0028/
Answered by: JimY
Date published: 2016-06-21

I have a brand new set of Powerbilt FZ1 heads and would like to put a set of maltby graphite shafts in the and my distance with my 7 iron is between 155 -158  I don't swing very fast and I would like to hit it higher can you help me!!!5-pw  Thank you!!!

Asked by: Harry
Thank you for your feedback! I've been playing Aldila by you between stiff and x stiff and just don't feel right my driver swing speed is 101 and I hit it very good with plenty of distance but my irons go nowhere. Are those shafts from Golfworks good and do you think regular work for me? Thank you.⛳️
Answered by: Harry
Date published: 2016-05-25

Need replacement shaft for fat shaft ( Wilson ) deep red.

Asked by: ronboy
You would need to contact Wilson regarding a replacement shaft for the Fat shaft. There are no aftermarket options available.
Answered by: JimY
Date published: 2016-05-23

Will these fit ping irons? If not please advise which items will fit

Asked by: noorm
No these shafts will not fit Ping Irons. All Ping irons use a .355" taper tip shaft and the Maltby MPF iron shafts are only available in a .370" parallel tip which is to large. I would recommend the Xcaliber Iron shafts AS0028 or AS0028S for a set of shafts for 4 through PW. http://www.golfworks.com/axe-xcaliber-taper-tip-graphite-iron-shafts/p/AS0028/ http://www.golfworks.com/axe-xcaliber-taper-tip-graphite-iron-shaft-set/p/AS0028S/
Answered by: JimY
Date published: 2016-05-02

What do flex A,R ang S stand for

Asked by: Reg
A represents a Senior flex shaft for slower swingspeeds. R represents a Regular flex shaft for normal swingspeeds. S represents a Stiff flex shaft for faster then normal swingspeeds
Answered by: JimY
Date published: 2016-02-04
  • 2016-12-03T07:51CST
  • bvseo_cps, prod_bvqa, vn_cps_3.4.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_12
  • loc_en_US, sid_MA0251, PRD, sort_recentAnswersFirst
  • clientName_golfworks