Maltby TE Forged Irons

Maltby TE Forged Irons

TE #3 Iron - 22 degree - Universal Bore (RH)
In Stock
TE #4 Iron - 24 degree - Universal Bore (RH)
In Stock
TE #5 Iron - 27 degree - Universal Bore (RH)
In Stock
TE #6 Iron - 31 degree - Universal Bore (RH)
In Stock
TE #7 Iron - 35 degree - Universal Bore (RH)
In Stock
TE #8 Iron - 39 degree - Universal Bore (RH)
In Stock
TE #9 Iron - 43 degree - Universal Bore (RH)
In Stock
TE #PW - 47 degree - Universal Bore (RH)
In Stock
TE #GW - 51 degree - Universal Bore (RH)
In Stock

Buy The Complete Set

Product Name

Maltby TE Forged Irons

Maltby TE Forged Iron Views New for 2010, the Maltby M-Series Tour Edition Forged Irons replace the popular MTF Forged Irons. The Tour Edition Forged Iron club head has been developed based on customer request for a traditional cavity back design with less graphics. The exceptionally clean look of the M-Series TE irons along with a traditional blade profile appeals to the better players and traditionalist looking for more forgiveness. The TE Forged irons are the result of a tireless five step forging process that starts with a raw billet of 1035 carbon steel and through a series of 5 different forging dies and multiple heat treating process’ creates an incredibly precise finished head requiring very little surface grinding. Typical forged cavity backs only utilize one forging die and have to be hand ground into the final shape and head weight, causing inconsistencies in every clubs specifications from one club to the next. By optimizing the center of gravity position, the Maltby TE Forged irons offer Super Game Improvement playability, combined with the exceptional feel and look of a true forged, players cavity iron.

  • Five-step true forging process provides unparalleled quality and playability.
  • 1035 Carbon Steel provides a soft, solid feel and allows for easy adjustability.
  • Traditional blade profile appeals to better players and traditionalist while maintaining a high playability.
  • Cavity back design concentrates weight around the perimeter and low, yielding a very forgiving “players” club.
  • Mirror, nickel chrome finish enhances feel and enhances the clean, traditional appearance.
  • Blended leading and trailing edges of the sole will not snag.
  • Universal hosel bore diameter allows for .355" and .370" tip shafts
  • Available #3 - PW, GW
  • Conforms to the rules of golf
  • RH only
  • Recommended golf ferrule – 74PI
  • Product Code = MA0099

Maltby TE Forged Iron Clubhead Specifications

Maltby TE Forged Irons is rated 4.875 out of 5 by 40.
Rated 5 out of 5 by from Great clubs! First off, these came with stickers giving the weight to within .1 gram, very cool. Secondly, the catalog and internet do not do these clubs justice. They are beautiful looking heads. I actually thought they were kind of ugly on the internet but wanted them anyway for the constant offset and high playability but once I saw them I was impressed. Finally,I assembled with Rifle 4.5 and tried a rudimentary M.O.I. match. The results have been wonderful and have carried over from the range to the course, actually better performing on the course! Congratulations on a great set; I anticipate buying another set just like it because they are that good!
Date published: 2013-01-28
Rated 5 out of 5 by from Perfect club I'm one of those golf fans who has played more clubs than I should have. Mizuno were by far my preference before I met Mr. TE Forged. I had been playing on any given day MP-32/60 combo or MP37. I'm really not consistent enough to play those clubs so I tried the Nike VR Forged. While they are no doubt long they were a bit too chunky in appearance for me and I just couldn't get comfortable with the 7-9 irons in particular. I demoed and loved the newest AP2 as well as the MP54 and JPX Pro. The problem with those three sets is I don't like paying that much for golf clubs. I'd rather spend it on my son or my wife. I am a golf blog junkie who rarely comments but always researches. After hearing much fanfare of the Maltby brand I dug a little deeper into their forged offerings. I bought a set of MMB used, and although I liked them and think they are fantastic clubs in their own right, they were just a little to long in their profile for me. I decided to swap out my 5 and 6 iron MP60 with a TE 5 and 6 to give Maltby another shot since I read the TE is a little more compact in length. Let me tell you that the minute I opened the box containing the 5 and 6 iron I went to the website and ordered the 7-Gap. These clubs ooze classy and beg to be swung the minute you lay eyes on them. The results on the range were immediately what I had felt the first time I pured one of my old mizzys. The funny thing is on the next shot I missed toward the toe considerably and figured for sure the ball would land 40 plus yards short and right of target. To my pleasure and surprise the ball traveled only 15 yards short (6 iron) on a rather poor swing that I know for a fact any other club I own would have had atrocious results. Even the shots which I hit a little thin traveled at the target and had enough steam to put me in a workable situation on my next shot. My other clubs no doubt would have left me with dribblers. I paired the heads with the Score LT shaft which is a perfectly acceptable combo but I do wish I would have gone stiff rather than regular as I'm getting some dispersion to the right. That's my fault however as I mistakenly ordered regular. Anyway, long story short, best club I've owned and at an unbeatable price. I'll never buy another brand/model of irons. Period.
Date published: 2014-10-02
Rated 5 out of 5 by from Great Forged Head For $25 a head you cannot beat the quality, look and feel of these irons. Just a plain and simple forged cavity back with hardly any offset no gimmicks or misleading marketing. They feel great, can be bent however you like and very well made. The also look great! simple and classy. These are superior in quality to most anything the general public can get (non professional club makers). I had a 7iron made up by golfworks (great work by the way) and can't be happier, I will probably get a whole set.
Date published: 2015-01-25
Rated 5 out of 5 by from TE irons remind me of Ben hogan apex Bought these irons with S300 dyn gold shafts after taking a club making class there at golf works. I am a Ben Hogan iron fanatic. These irons have a great look and balanced feel. When you hit the sweet spot the feeling is awesome. Great distance and a much higher playability rating than my Hogans with that same wonderful sweet spot! For your Hogan fans you know exactly what I am talking about. Great job golfworks team on these irons.
Date published: 2012-11-24
Rated 5 out of 5 by from Great irons! I've tried most top-end irons over the years (Titleist, Ping, Taylor Made, etc.). These TE irons have a great classic look to them like the old Titleist DCI or Hogan Apex but with very high MOI. They look great, feel great and are super game improvement. As with any club in your bag, it makes a huge difference when you get properly fitted (my club fitter adjusted loft and lie and recommended 1/2 inch longer shafts with KBS C-Taper 90 shafts - but that's just my specs). I would compare the look, feel and results of these TE irons with any of the irons from the big-name manufacturers.
Date published: 2015-11-18
Rated 5 out of 5 by from End of a Long Search I have a pile of 7 iron heads from testing to find a perfect club. This is it. Assembled them on FST PRO 115 shafts and have never been more pleased with a set of irons. They seem able to correct for off center hits but still let you know how you are striking the ball. Also makes a beautiful club with very clean lines, especially with leaving the labels off the shafts. At less than half the price of comparable (yet not as great) manufactured clubs, I must salute Maltby and The GolfWorks.
Date published: 2011-01-16
Rated 5 out of 5 by from Amazing These are amazing club heads. They are so forgiving with such a small head. Beautiful look at address. I coupled them with Grafalloy ProCustom shafts and Lamkin X10 grips. I had to add quite a bit of weight to the heads to get to my preferred d2 swingweight but was successful at forming the lead tape inside of the curve of the cavity so they look pretty cool. Best playing club I have owned. Nice high ball flight with good distance on off center hits. Highly recommended!
Date published: 2013-02-28
Rated 5 out of 5 by from Great Irons I picked the 5-PW of these irons over the last couple months. Absolutely loving them so far. Shafted them with Dynamic Gold S300 taper tips. The universal hosel works well as I put a parallel tip shaft in the PW. Love the thin topline. Very good forgiveness and exceptionally soft on good strikes. Can't say enough good things about them. Love the size, look, feel and price. Have recently played Adams A4R and Callaway X-22 and definitely prefer these.
Date published: 2013-05-08
  • 2016-10-21T09:00CST
  • bvseo_cps, prod_bvrr, vn_cps_3.4.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_40
  • loc_en_US, sid_MA0099, PRD, sort_relevancy
  • clientName_golfworks

would these irons be similar with the toski t 54 irons.

Asked by: oneputter
The TE Forged irons are a little bigger looking clubhead then the Toski T54 irons and a little more forgiving then the T54 irons. The TE Forged irons are very good. With the T54 being a true blade design you might also want to look at the MMB-17 irons (MA0226).
Answered by: JimY
Date published: 2016-10-14

Hi, If I install .355 taper tip shafts with brass/lead tip weights into these universal hosels, will the head of the tip weights be correctly seated/centred in the smaller bore at the bottom of the hosel?

Asked by: Owen
For me personally if I were adding tip weights I would use SHIMT shims to make sure the shafts stay centered in the bore. The tip weights could keep the shafts from setting properly in the hole in the center bottom of the bore. You need to use the .335" wood tip weights with the .355" taper tip shafts.
Answered by: JimY
Date published: 2016-10-14

Is the loft for the 3 iron 21 or 22 degrees? The specifications box says 22, but the top of the page says 21.

Asked by: Jim
The TE Forged #3 iron is 22 degrees. We have a type-o at the top of the page and will get that corrected.
Answered by: JimY
Date published: 2016-09-30


Asked by: CHARLIE
The offset is .100" through the whole set of irons. You can see all the specifications for these irons by scrolling down the page to the black specificaitons box at this link.
Answered by: JimY
Date published: 2016-09-19

If I order the heads can they be set to be one degree string on loft and 2 degrees upright on lie? And if so how do I specify that in the order process?

Asked by: Johncb1978
Yes these can be adjusted for both loft and lie. There is an additional charge of $4.95 per club for this service. If you are ordering on line put a note in the Special Instructions box at Checkout for the specifications you want. Customer Service will enter the order when it comes in.
Answered by: JimY
Date published: 2016-08-22

bought a set of mtf forged 8 years ago when i got back to playing....can't find the PW, and never had a GW..what would be the current day replacement

Asked by: pete
The TE Forged (MA0099) is the exact same clubhead. We just gave it a name change and updated the grooves when the USGA implemented the new groove rule.
Answered by: JimY
Date published: 2016-07-26

Do you have sand wedge

Asked by: Bob
No we do not make a matching sand wedge for the TE Forged irons.
Answered by: JimY
Date published: 2016-07-25

Are the TE Black Diamond available for taper and parallel?

Asked by: rvmj7
Yes the DBM irons also have the Universal hosel to accept taper or parallel shafts.
Answered by: JimY
Date published: 2016-07-08
  • 2016-10-21T08:51CST
  • bvseo_cps, prod_bvqa, vn_cps_3.4.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_56
  • loc_en_US, sid_MA0099, PRD, sort_recentAnswersFirst
  • clientName_golfworks