Maltby Tour Grind MG Wedges

Maltby Tour Grind MG Wedges

Tour Grind MG Wedge - 52 Degree -
In Stock
Tour Grind MG Wedge - 56 Degree -
In Stock
Tour Grind MG Wedge - 60 Degree -
In Stock

Maltby Tour Grind MG Wedges

Maltby MG Tour Grind Wedges Views

The Maltby MG Tour Grind Wedges were designed for the player that demands creativity around the greens. The sole design of the MG Tour Grind Wedges features a narrow sole with an exaggerated toe and heel Tour Grind making them the most versatile wedges ever designed under the Maltby brand. Micro Grooves (MG) have been CNC milled into the face to consistently increase spin around the greens. The Diamonized Black Metal finish is a very thin chemically implanted coating that is twice as durable as traditional nickel chrome plating and 30 times more durable PVD coatings typically found on modern black wedges. The DMB finish will not “crack” or “peel” when being bent to custom specs yet is so strong it will actually extend the sharpness and overall shape of the precision milled MG grooves vs. any other wedge finish currently available. If you desire a wedge that allows for the ultimate in consistency and creativity, the Maltby MG Tour Grind wedges are the answer!

MG Tour Grind Wedge Product Editorial

  • Form Forged from 1025 Carbon Steel for a soft feel and easy adjustability.
  • Narrow sole width and relieved heel and toe Tour Grind for the ultimate is face angle manipulation.
  • “DBM” Diamonized Black Metal finish is a chemically implanted finish that is more wear resistant, corrosive resistant, and scratch resistant than any current carbon steel finish available.
  • “MG” groove technology (CNC milled) places more grooves on the face than traditional wedges, consistently increases ball spin on less than full shots.
  • Available in 52(8), 56(11) and 60(7) loft and bounce options.
  • Conforms to the rules of golf
  • Recommended ferrule – 70PI
  • Quick Ship Pak available
  • Product Code - MA0233

Maltby Tour Grind Wedge Clubhead Specifications

Maltby Tour Grind MG Wedges is rated 4.2 out of 5 by 22.
Rated 5 out of 5 by from Butta First of all. These are the most beautiful wedges I have ever seen (all manufacturers included). I paired 52, 56 and 60 degree wedges with rifle spinner shafts with sensicore inserts. The feel, even on full swing shots is unmatched by any OEM. At Carl's Golfland, I demoed a vokey sm4, Cleveland 588, and Mizuno MP R-12 along with my Maltby MG Tour. The Maltby performed just as well as the others, but had a better feel. Perhaps due to the sensicore inserts. The grind on these wedges allow the skilled player to perform an arsenal of shots around the green. Simply put, these wedges perform just as well as any major OEM at 1/3 of the price. Put all that together, BUTTA!
Date published: 2013-10-06
Rated 4 out of 5 by from Pretty good wedge at great price Although I have not had the ability to take this wedge to the course, I have had extensive practice sessions with it and can say without a doubt, the finish on this wedge is fantastic. I bought the 60-07 and love the versatility of the grind. I shafted it with the Rifle Spinner shaft and really like the soft feel on half-three quarter shots as well as fuller shots. Spin is very controllable and not over-excessive, which is great for a high spin player like myself. If the wedge performs as good on the course like it does on the short game areas, I will seriously consider the 52 or 56. I would, however, like to know whether the grooves are usga conforming or not, as I plan on playing tournaments with it next year
Date published: 2014-12-16
Rated 5 out of 5 by from Great wedges for a great price! I bought these clubs about a month ago and couldn't be more impressed! I used the same set of Maltby irons for 12 years, but have always been a Cleveland wedge loyalist. I was in need of new wedges, and thought I'd give the Tour Grind MG a shot, and I couldn't be happier! Not only did they perform as well, or a little better, than my old Cleveland's, but they were a fraction of the cost! If you're on the fence, give them a shot, with the 30 day playability guarantee you have nothing to lose, but you need it, these are awesome.
Date published: 2015-06-01
Rated 5 out of 5 by from Predictable Results This is my second Tour Grind wedge. This time a 60* to replace one that I had played for a long time but had lost. I first tried one from another fine component company. It had a different face and bounce. I worked with it for a year before I gave up on it. I was just never sure what was going to happen when I hit it. With this Tour Grind MG wedge the results are very much what I expect for the shot I am trying to hit. I really like the feel, look, and finish; as well as the playability. A real winner.
Date published: 2015-07-14
Rated 5 out of 5 by from Best Set of Wedges I Have Owned! I originally purchased the 56° wedge in order to evaluate performance and the durability of the finish. It didn't take long for me to order the 52° and 60° wedges to complete my set. These are easily the best performing wedges I have ever owned, and I've owned quite a few different sets from the most popular OEM's to components from other reputable manufacturers. Feel/Feedback is excellent and the grinds are perfect. I've had my wedges for several months now and the finish is extremely durable, hardly a scratch. Very attractive design as well. These wedges have instilled much more confidence in my short game, something that I've lacked in my overall game. I would most highly recommend these wedges.
Date published: 2016-06-20
Rated 5 out of 5 by from Great Wedge Probably have played close to 10 rounds with the 60 so far which is my wedge of choice under 90 or so yards. Very much exceeded my expectations. Used a True Temper DGS300 for the shaft - tipped to 8-iron flex. Basically this is the wedge flex used by most companies. Absolutely perfect balance. The grind is the best I've encountered so far. Can lay the blade totally flat, but never feel like it will excessively dig on full shots. Stopping power is great. Works good out of the sand as well. The finish is impeccable with no blemishes showing after quite a few shots. Still can't believe it only cost about $60 to build the club. I've been using Callaway X-Forged for the last 3 years or so and these are without a doubt much better. Are they as good as Vokey's? Not sure, but they meet all of my requirements. I can change the head out once a season and keep the shaft for only $35 and 5 minutes of time if the grooves get worn. Kudos to Maltby for the design.
Date published: 2013-08-15
Rated 5 out of 5 by from Tour Grind Wedge I puchased the 56 and 60 degree wedges with spinner shafts last year and have played about 30 rounds with them. These are great wedges! I have always played Cleveland wedges and thought I would give these a try after liking the TE forged irons. The look and feel are excellent and would highly recommend them to anyone.
Date published: 2014-03-13
Rated 5 out of 5 by from Great Bought all three heads 52, 56, and 60. Put the KBS C-Taper tipped to a 4.5 frequency. I love the feel and performance. The grind allows me to pick the ball very clean on tight lie's. The bounce on the 56 degree works well in most sand. I'm very happy with the finished product.
Date published: 2013-07-11
  • y_2016, m_12, d_2, h_10
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_22
  • loc_en_US, sid_MA0233, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

What is the lie angles of the 52, 56, 60 wedges..Tour grind MG

Asked by: Bill
The lie angle is 64 degrees for all 3 of these wedges. You can scroll down the page to the black specification box at this link and see all the spec's for these wedges.
Answered by: JimY
Date published: 2016-10-18

How do I pick S shaft on this order? Can I have medium grips put on them as part of the order?

Asked by: MoMan
The MA0233 code if for the clubhead only not an assembled club. You would need to order the shaft and grip separately. We do offer the Club Paks at this link for these wedges that include the head, shaft & grip. You would pick your flex or indicate the flex you would like in the Special Instructions box at Checkout. We do not make substitutions for the grips in the Club Paks but we can build up the grip to the size you need. Again make a note in the Special Instructions box at Checkout.
Answered by: JimY
Date published: 2016-07-08

What kind of shaft do you put on this how much does it weigh? What is bounce on the sole?

Asked by: MARK
We do offer Club Paks with different shafts available or you can purchase the head and which ever shaft you would like and we can assemble it for you. You can see the different Club Paks at this link. You can see the bounce and all the specifications for these wedges at this link and by scrolling down the page to the black specification box.
Answered by: JimY
Date published: 2016-07-05

Will you be offering different lofts? I'm interested in a 50, 54, 58 set.

Asked by: mikeberlin
At this time we are not planning to add lofts to the MG Tour Grind Wedges. That could change, but currently no plans. If we did, we would add the 50, 54 and 58. These can be adjusted to those lofts, with the understanding that strengthening the loft will reduce the bounce and increasing the loft will increase the bounce. If you took the 56 degree, for example, and had it bent to 58, the bounce would go from 11 degrees to 13 degrees. If you took the 52 and bent it to 50 degrees, the bounce would go from 8 to 6 degrees.
Answered by: GW2002
Date published: 2016-05-20

What tip diameter do these heads take? Also, are you able to bend these to a 58degree loft?

Asked by: Mikey
The MG Tour Grind Wedges are a .370" hosel bore. They are not adjustable for loft and lie.
Answered by: JimY
Date published: 2016-04-12

Have these wedges been confirmed conforming by the USGA?

Asked by: ayjay11
this needs to be updated, they are approved and you can search the USGA database to find them. 
Answered by: TJS
Date published: 2016-04-06

I'm a 14 hccper. Like to use my sw for all shots within 30 yds of the green (from fw and rough) Also, play courses with traps that don't have fluffy sand. Please suggest best model for me. Thanks

Asked by: balto
If the sand tends to be more coarse, a neutral to narrower sole tends to work better. The new M-Series Silver wedge with 0.90 sole width could be a good choice.
Answered by: GW2002
Date published: 2015-09-14

what shafts do I need? I am 70 yrs old with a five handicap

Asked by: jimbop
True Temper Dynamic Gold S300 iron shafts are the most common shafts used in wedges. We offer our Club Pak for these wedges with the True Temper Score LT which also works well.
Answered by: JimY
Date published: 2015-08-24
  • 2016-12-05T07:51CST
  • bvseo_cps, prod_bvqa, vn_cps_3.4.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_29
  • loc_en_US, sid_MA0233, PRD, sort_recentAnswersFirst
  • clientName_golfworks