Maltby Trouble Out HL Fairway Woods

Maltby Trouble Out HL Fairway Woods


Trouble Out HL, #3 Wood -
$34.99
In Stock
Trouble Out HL, #5 Wood -
$34.99
In Stock
Trouble Out HL, #7 Wood -
$34.99
In Stock
Trouble Out HL, #9 Wood -
$34.99
In Stock

Maltby Trouble Out HL Fairway Woods

Maltby Trouble Out HL Fairway Views

The Trouble Out HL fairway/utility wood's' progressive bounce sole design featuring tungsten sole weighting and the two sharp turf cutting parallel runners has been re-engineered to perform even better than the previous models. The sole bounce pad surface area has been increased to allow the actual measured bounce to be decreased without sacrificing the effective bounce of the club head. The runners have been expanded allowing the leading edge of the club face to sit lower to the ground improving contact on tight lies without affecting the performance from other types of turf and sand. The Trouble Out HL classic pear shaped profile features progressive face heights (shorter in #3 progressing deeper in the #9) to optimize impact area, ground contact and trajectory. The heavy tungsten sole weight lowers the vertical center of gravity to produce more solid shots vs. traditional fairway woods.

  • Classic shape manufactured from 17-4 stainless steel.
  • Extreme sole weighting, built in progressive bounce and two parallel sole runners produce a very aggressive high launching trajectory from divots, hard pan, sand, high grass as well as tightly mowed fairways without fear of hitting a fat shot.
  • Progressive face heights and leading edge heights optimize impact area, ground contact and trajectory.
  • Tungsten sole weight lowers the center of gravity to produce more solid shots.
  • Available in a #3, #5, #7 and #9 wood.
  • Recommended ferrule - 53PW
  • Product Code - MA0230

Maltby Trouble Out HL Fairway Woods is rated 4.8 out of 5 by 9.
Rated 5 out of 5 by from Great Addition I needed 3 wood length but with ability to hit off the fairway and out of rough. My 3 wood was going too far and I needed a club with more versatility with more seperation from my driver. I am a 12 hcp and my shaft formula is 4B2S. The ProLaunch Blue 45 shaft with the 5 wood head has been a great combination. Very important to select the correct shaft for the swing requirements. I carry 4 wedges, 1 hybrid, driver, and now the 5 Trouble Out.
Date published: 2016-07-29
Rated 4 out of 5 by from Playable Both In and Out of Trouble Purchased the 3, 5, and 7 woods to add some versatility to my set up depending the course played. I find the heads very forgiving with unexpected length. The heads produce results all over the course. If you like head-heavy feeling fairway woods and look for results through solid contact versus pure speed - these are worth a serious look.
Date published: 2015-11-17
Rated 5 out of 5 by from Dropped my hdcp in half... Been using the full range of Maltby trouble out woods for the past 6 years and in that time, my hdcp has dropped from 20 to 10. My friends all laughed when i first pulled out the 11 wood, but they don't laugh anymore when I'm knocking it stiff from 150 meters out ... highly recommended.
Date published: 2014-11-21
Rated 4 out of 5 by from Nice clubhead Review of the 5w. The head itself is very well constructed and nicely finished. I built with an Xcalibur SL Fairway shaft and unfortunately it is not a good combo for me. I would recommend others to give this head a shot.
Date published: 2016-06-10
Rated 5 out of 5 by from Bought three I prchased the 9 wood three years ago. A friend tried it and loved it so I built one for him. I then purchased the 7 wood and it has become a go to club for accuracy, high flight, and varying distances.
Date published: 2016-07-20
Rated 5 out of 5 by from Satisfied I bought and built spoon five and a seven fairwaywood more than ten years ago and I'm so pleased with these clubs, they are absolutley brilliant.
Date published: 2014-05-08
Rated 5 out of 5 by from Getting it up I bought a 3 and a 5 wood head in order to get the off our tight lies. I have had 7 and 9 woods for many years so knew what these would do.
Date published: 2016-05-21
Rated 5 out of 5 by from Been Playing these Woods For Years I have the 3 5 7 9 & yes an 11 wood that I built 6 years ago. Would not give them up for any other clubs on the market.
Date published: 2016-05-15
  • y_2016, m_12, d_2, h_10
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_9
  • loc_en_US, sid_MA0230, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

If I were to put a TT x100 Steel Shaft in the 9 wood head and the 7 wood head with a standard grip (GP Tour Wrap) and was looking for a Swing weight of D3, what lengths for each would you suggest?

Asked by: Gus
Based on spec. weights for the heads, shafts and grips the 7 wood would be 41.25" and the 9 wood 40.25" to achieve a D3 swingweight.
Answered by: JimY
Date published: 2016-11-21

What is the standard / recommended shaft length for the 9 wood ?

Asked by: BCL1722
If we assemble the 9 wood with a graphite shaft that weights 65 grams or more we assemble it to 41". If the shaft weights 64 grams or less we assemble it to 41.5". Here is the link to our Standard Length Chart. http://www.golfworks.com/images/art/StdLengths.pdf
Answered by: JimY
Date published: 2016-11-03

I had an old Trouble Out wood shaft (.335) that I bought on sale a couple of years ago. It is deep red & silver. S flex. Is there a comparable shaft available today.

Asked by: apljax
Our MPF Fairway Wood (MA0249) matches the older Trouble Out shaft very well. http://www.golfworks.com/maltby-mpf-graphite-fairway-shaft/p/MA0249/
Answered by: JimY
Date published: 2016-09-28

Do you have left handed 9 fairway woods?

Asked by: Paul
We do not offer a left handed 9 wood in any of our models.
Answered by: JimY
Date published: 2016-09-12

I like to hit 3 wood off the tee alot.would like to find a head that has around 200 cc volume.Any suggestion?

Asked by: ezee
Our ST-Fd 3d wood (MA0228) is right at 200cc's. I do not have the volume measurement on the Trouble Out HL (MA0230) but it would also be in the 200cc range.
Answered by: JimY
Date published: 2016-08-22

Do they make the hybrid sandwedge loft 55

Asked by: Hal
In the STi-HS irons the Sandwedge is 55 degrees. At this link scroll down the page to the specification box and you will see all the specifications for these irons. http://www.golfworks.com/maltby-sti-hs-irons/p/MA0269/
Answered by: JimY
Date published: 2016-08-11

Thinking if getting the Malty Trouble Out HL #9 wood.  Is there a recomended shaft? Male golfer, 12 handicap

Asked by: TedB
You could use any fairway shaft that fits your requirements. The MPF Series Fairway shaft (MA0249) or the Xcaliber Fairway shaft (AS0021) would be good options to consider for the TO #9 wood.
Answered by: GW2002
Date published: 2016-06-03

Does the Trouble Out HL utility club come in left hand.  Would like a #9. If they do not co,e in left handed.  WHY?

Asked by: Jake
We do not offer the Trouble Out HL wood in LH. We just do not sell enough LH to justify the cost of design and manufacturing.
Answered by: JimY
Date published: 2016-05-02
  • 2016-12-03T07:52CST
  • bvseo_cps, prod_bvqa, vn_cps_3.4.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_23
  • loc_en_US, sid_MA0230, PRD, sort_recentAnswersFirst
  • clientName_golfworks