Mitsubishi Rayon Kuro Kage Silver w/Tini 2nd Gen Wood Shafts

Mitsubishi Rayon Kuro Kage Silver w/Tini 2nd Gen Wood Shafts


60 R Flex - 46", .335" tip (65gm) 3B2M -
$249.99
In Stock
60 S Flex - 46", .335" tip (67gm) 4B2M -
$249.99
In Stock
60 X Flex - 46", .335" tip (69gm) 5B1M -
$249.99
In Stock
70 S Flex - 46", .335" tip (76gm) 4B1M -
$249.99
In Stock
70 X Flex - 46", .335" tip (77gm) 5B1M -
$249.99
In Stock
Pureing 
1-3 $15.50
4+ $13.50
Tip & Butt Trimming
$4.95
Tip Prepping
$2.95

Mitsubishi Rayon Kuro Kage Silver w/Tini 2nd Gen Wood Shafts

The Second Generation KURO KAGE™ Silver Wood Series will feature the same Profile and High Density Prepreg as the original KURO KAGE™ Silver shafts, but with the addition of TiNi wire in the tip section. The result is a series of shafts that will deliver the lower launch and lower spin of the original KURO KAGE™ Silver profile, but with added stability and increased energy release through the impact zone, adding explosive power to the signature, KURO KAGE™ Silver profile.

Trimming Instructions

Mitsubishi Rayon Kuro Kage Shaft Specifications

Mitsubishi Rayon Kuro Kage Silver w/Tini 2nd Gen Wood Shafts is rated 4.0 out of 5 by 2.
Rated 3 out of 5 by from Too low launch for me... I have this shaft as a custom option on my Vokey SM6 wedges, love the lower launch of those. But must say, couldn't handle this shaft with the M1 driver, the mid launch option by Taylor Made. My swing speed is low 90s, found I actually lost distance with this on the M1, went back to the Fujikura Pro.
Date published: 2016-07-11
Rated 5 out of 5 by from Quality at a good pice Put this shaft in my own driver and have found it to be every bit as good or better than an old white board shaft I used
Date published: 2014-12-07
  • 2016-08-26T08:09CST
  • bvseo_cps, prod_bvrr, vn_cps_3.3.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_2
  • loc_en_US, sid_MR0042, PRD, sort_relevancy
  • clientName_golfworks

Is this a parallel butt or taper design?  Curious because of butt size / grip install?

Asked by: JWY
The Kuro Kage shafts do have a parallel butt section. They do not taper right away like the Aldila NV and some of the other Aldila shafts.
Answered by: JimY
Date published: 2016-05-11

Will the Kuro Kage silver 60 R-Flex TiNi play similar to my Aldila RIP Phenom 55?

Asked by: Golferman25
The RIP Phenom is noticeably lighter, approximately 17 grams lighter, and is stiffer in the tip section then the Kuro Kage. The Kuro Kage has a higher balance point. To me the weight would be the biggest and most noticeable difference in these two shafts.
Answered by: JimY
Date published: 2016-02-22

Will the KuroKage Silver TiNi "S" flex be similar to my TaylorMade M.A.S 2, "S", 5.55, mid torque, soft tip shaft?

Asked by: dpb449
I would expect the Kuro Kage Silver TiNi "S" flex will play a little stiffer then the Taylor Made M.A,S 2 "S" flex shaft. Most of the stock manufactures shafts tend to play a little more flexible then normal. The soft tip on the Taylor Made shaft would be for a higher ball flight and the Kuro Kage is designed for more of a low/mid ball flight. The original Kuro Kage Silver would likely be a better match (MR0036) http://www.golfworks.com/product.asp?pn=MR0036
Answered by: JimY
Date published: 2015-12-29

CAN'T FIND SPECS FOR THE KURO KAGE 50 GR SHAFT

Asked by: GAZZA
We do not stock the 50 gram shaft but you can see the specifications at this link on Mitsubishi web site. http://www.mrc-golf.com/products/silver-tini We can special order the shaft for you if you decide you would like one.
Answered by: JimY
Date published: 2015-12-08

What are the specs on this shaft? Kick point? Tip?

Asked by: Wyatt
The spec's box for these shafts is at the bottom of the page at this link. http://www.golfworks.com/product.asp_Q_pn_E_MR0042 The spec's vary a little bit depending on which weight and flex you are looking at.
Answered by: JimY
Date published: 2015-10-14

I have a swing speed of 110 and a low draw ball flight. I play an x flex but I was wondering if I should get the kuro kage or the Fubuki. I need a mid kick point and around 66 to 67 grams. Thank you.

Asked by: jake1998
There are several Fubuki options, but based n the information you have given, I would say the Fubuki Z is the closest to what you have described. I am also assuming you are referring to the Kuro Kage Black, which is designed more to your characteristics than the Kuro Kage Silver. There is not a big differnce between the Fubuki Z and the Kro Kage Black from a specification stand point. The Fubuki Z is more of a mid launch design where the Kuro Kage is a low to mid lanuch. Both have mid/high bend points in the X flex, with the Fubuki Z having a little firmer tip, meaning it might feel a little firmer.
Answered by: GW2002
Date published: 2014-10-27
  • 2016-08-26T08:05CST
  • bvseo_cps, prod_bvqa, vn_cps_3.3.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_6
  • loc_en_US, sid_MR0042, PRD, sort_recentAnswersFirst
  • clientName_golfworks