Multi Purpose Finishing Block

Multi Purpose Finishing Block


Multi Purpose Finishing Block
$5.99
In Stock

Multi Purpose Finishing Block

Grit embedded rubber block is an excellent tool for removing minor scratches from stainless steel heads or cleaning up the face of a sandblasted iron.

Simply use the block like an eraser, rubbing firmly over the surface. Grit is embedded throughout the block, so it stays abrasive as the block wears. Easy to use. 3" x 1" x 5/8".

AccessDeniedAccess Denied3476A38E83B54785VSa2wsoRolnu3alN/dnVmpMQP35dIkmN4jJx9/dnKd2yETnQSOHXJ4ftDFNf4ZeklyU2z1gNqrQ=

Is a finishing wheel availablem

Asked by: Louieg
Yes it is in stock. http://www.golfworks.com/product.asp?pn=MPFB
Answered by: JimY
Date published: 2015-08-17

What grit is best for the face of irons that have scratches ( med, fine, etc.) The irons have a snd blasted factory finish. (Titleist AP1) Thanks, lmatteo

Asked by: Lmatteo
The Multi Finishing Block (MPFB) will only remove light cosmetic or "shop worn" scratches on a chromed iron head such as the AP1. The grit is perfect for blending in scratches on the sand blasted face. You want to use very light pressure until you get a feel for how much the grit embedded into the rubber will effect the finish.
Answered by: Admin
Date published: 2015-03-03
  • 2016-07-29T07:38CST
  • bvseo_cps, prod_bvqa, vn_cps_3.3.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_2
  • loc_en_US, sid_MPFB, PRD, sort_recentAnswersFirst
  • clientName_golfworks