Nippon N.S. Pro Modus 3 Tour 120 .355 Tip Iron Shafts

Nippon N.S. Pro Modus 3 Tour 120 .355 Tip Iron Shafts


R Flex 37.0" - .355 tip (111g) 3B1H
$37.00
In Stock
R Flex 37.5" - .355 tip (111g) 3B1H
$37.00
In Stock
R Flex 38.0" - .355 tip (111g) 3B1H
$37.00
In Stock
R Flex 38.5" - .355 tip (111g) 3B1H
$37.00
In Stock
R Flex 39.0" - .355 tip (111g) 3B1H
$37.00
In Stock
R Flex 39.5" - .355 tip (111g) 3B1H
$37.00
In Stock
R Flex 40.0" - .355 tip (111g) 3B1H
$37.00
In Stock
R Flex 40.5" - .355 tip (111g) 3B1H
$37.00
In Stock
R Flex 41.0" - .355 tip (111g) 3B1H
$37.00
In Stock
S Flex 37.0" - .355 tip (114g) 4B1H
$37.00
In Stock
S Flex 37.5" - .355 tip (114g) 4B1H
$37.00
In Stock
S Flex 38.0" - .355 tip (114g) 4B1H
$37.00
In Stock
S Flex 38.5" - .355 tip (114g) 4B1H
$37.00
In Stock
S Flex 39.0" - .355 tip (114g) 4B1H
$37.00
In Stock
S Flex 39.5" - .355 tip (114g) 4B1H
$37.00
In Stock
S Flex 40.0" - .355 tip (114g) 4B1H
$37.00
In Stock
S Flex 40.5" - .355 tip (114g) 4B1H
$37.00
In Stock
S Flex 41.0" - .355 tip (114g) 4B1H
$37.00
In Stock
X Flex 37.0" - .355 tip (120g) 5B1H
$37.00
In Stock
X Flex 37.5" - .355 tip (120g) 5B1H
$37.00
In Stock
X Flex 38.0" - .355 tip (120g) 5B1H
$37.00
In Stock
X Flex 38.5" - .355 tip (120g) 5B1H
$37.00
In Stock
X Flex 39.0" - .355 tip (120g) 5B1H
$37.00
In Stock
X Flex 39.5" - .355 tip (120g) 5B1H
$37.00
In Stock
X Flex 40.0" - .355 tip (120g) 5B1H
$37.00
In Stock
X Flex 40.5" - .355 tip (120g) 5B1H
$37.00
In Stock
X Flex 41.0" - .355 tip (120g) 5B1H
$37.00
In Stock
Pureing 
1-3 $15.50
4+ $13.50
Tip & Butt Trimming
$4.95
Tip Prepping
$2.95

Nippon N.S. Pro Modus 3 Tour 120 .355 Tip Iron Shafts

PGA Tour tested and designed to meet the demands of the stronger player.

Features:
  • .Provides Desired Trajectory as a result of the unique structure of a stiff tip section and softer mid section.
  • Provides Accurate Distances due to the unique raw steel material and accompanying heat treatment.
  • Provides Tight Dispersion coming from the exacting tolerances of the highest quality level

Trimming Instructions

Nippon Shaft Specifications

Nippon N.S. Pro Modus3 Tour 120 .355 Tip Iron Shafts is rated 5.0 out of 5 by 3.
Rated 5 out of 5 by from Smooth, long and great trajectory! Installed in a few clubs to test... now I'm putting in all my irons. Smoother than the KBS Tour... with the trajectory of Project X. Simply the best iron shaft I've ever hit. Expensive, but well worth it.
Date published: 2015-08-27
Rated 5 out of 5 by from Best Iron Shaft I've ever hit! Have the 105g shaft in all my irons. The trajectory is perfect. The shaft provides consistency in trajectory and feel with every iron and in every shot. In 30 years of playing it is the best shaft I have ever used
Date published: 2016-07-03
Rated 5 out of 5 by from Quality steel shaft for the better playet A very tight great feeling steel shaft of the highest quality
Date published: 2016-04-24
  • y_2016, m_12, d_9, h_11
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_3
  • loc_en_US, sid_NP0001, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

need the standard 8 iron length?

Asked by: chip
The 8 iron shaft in the Modus3 120 shafts is the 38" raw length shaft.
Answered by: JimY
Date published: 2016-11-21

Got good results with the Nippon 1150 S but fitter didn't have Modus 3 to try on Mizuno heads. Driver swing is ~110 and curious how the Modus 3 compare? Moving from project X 6.5 and love the load of the Nippons and ball flight. 

Asked by: Dave
The Project X 6.5 tests noticeably stiffer then the 1150GH or Modus 3 Tour 120. The Project X tests more then a full flex stiffer at the butt end then either of these shafts. The Modus 3 Tour 120 also tests stiffer then the 1150GH but not by quite a full flex. The Modus 3 Tour 130 S flex tested just a shade stiffer in the upper part of the shaft compared to the Project X 6.5 but more flexible in the tip then the Project X 6.5. The Modus 3 Tour 130 S is stiffer then the Modus 3 Tour 120 X except for the tip stiffness which is more flexible in the 130.
Answered by: JimY
Date published: 2016-11-07

What length is appropraite for a gap wedge? (I play Callaway Apex CF 16 irons, plus 1/2 inch shafts.

Asked by: KBC
The 37" raw length shaft is for all the wedges. You will have no problem with making this gap wedge plus 1/2".
Answered by: JimY
Date published: 2016-10-12

playing KBS tour V's in my Hogan irons, but I am experiencing some hand issues. Don't like recoil graphite at all. Would the Nippon steel shafts have as much vibration as KBS?

Asked by: Smitty
Any steel shaft is going to be about the same for vibration. It is a nature of the beast type of thing. You might try adding the True Temper Sensicore insert (TTSP). You will be surprised how much vibration they absorb. http://www.golfworks.com/true-temper-sensicore-inserts/p/TTSP/
Answered by: JimY
Date published: 2016-09-12

which raw length should I order for standard 4-iron?

Asked by: chuck
The 40" raw length shaft is the 4 iron shaft for the NP0001 shafts.
Answered by: JimY
Date published: 2016-09-06

I am trying to determine if it is time to move from a X flex to to an S   Other than swing speed what other information do you need?

Asked by: gray
We also use carry distance or what iron you use to hit a 150 yard shot. For an X flex we reference a 9 iron or wedge from 150 yards and for an S flex we reference an 8 iron. Depending on which shaft model you are currently playing in a X flex you might try a lighter weight X flex. Sometimes that change of weight is enough to make the needed difference. You could also try soft stepping the X flex shafts. This means putting the 3 iron shaft into a 4 iron which will make most shafts play a quarter of a flex more flexible. I have even soft stepped 2 clubs before to make the shaft play a half a flex more flexible. If I am considering a shaft change I will usually get 1 or 2 shafts and try them first before purchasing the whole set.
Answered by: JimY
Date published: 2016-08-16

Standard length for a steel shafted 6 iron.

Asked by: George
Standard lengths can vary from one manufacture to another and even within one manufacture from one model to another. Our recommended steel shafted 6 iron length is 37.25". You can see our standard length chart at this link from our web site. http://www.golfworks.com/images/art/StdLengths.pdf
Answered by: JimY
Date published: 2016-06-07

Are you considering stocking the TX in this shaft?

Asked by: ARCHERE
Not at this time. We should be able to special order the TX flex for you. Contact customer service at golfworks@golfworks.com or by calling 1-800-848-8358 and they will be able to help you.
Answered by: JimY
Date published: 2016-06-07
  • 2016-12-09T07:56CST
  • bvseo_cps, prod_bvqa, vn_cps_3.4.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_24
  • loc_en_US, sid_NP0001, PRD, sort_recentAnswersFirst
  • clientName_golfworks