Nippon Pro N.S. Pro 8950GH Steel Iron Shafts

Nippon Pro N.S. Pro 8950GH Steel Iron Shafts


A Flex 39.0" (#3 Iron) - .355 tip (93g) 2B2H
$24.50
In Stock
A Flex 38.5" (#4 Iron) - .355 tip (93g) 2B2H
$24.50
In Stock
A Flex 38.0" (#5 Iron) - .355 tip (93g) 2B2H
$24.50
In Stock
A Flex 37.5" (#6 Iron) - .355 tip (93g) 2B2H
$24.50
In Stock
A Flex 37.0" (#7 Iron) - .355 tip (93g) 2B2H
$24.50
In Stock
A Flex 36.5" (#8 Iron) - .355 tip (93g) 2B2H
$24.50
In Stock
A Flex 36.0" (#9 Iron) - .355 tip (93g) 2B2H
$24.50
In Stock
A Flex 35.5" (Wedge) - .355 tip (93g) 2B2H
$24.50
In Stock
R Flex 39.0" (#3 Iron) - .355 tip (97g) 3B2H
$24.50
In Stock
R Flex 38.5" (#4 Iron)- .355 tip (97g) 3B2H
$24.50
In Stock
R Flex 38.0" (#5 Iron) - .355 tip (97g) 3B2H
$24.50
In Stock
R Flex 37.5" (#6 Iron) - .355 tip (97g) 3B2H
$24.50
In Stock
R Flex 37.0" (#7 Iron) - .355 tip (97g) 3B2H
$24.50
In Stock
R Flex 36.5" (#8 Iron) - .355 tip (97g) 3B2H
$24.50
In Stock
R Flex 36.0" (#9 Iron) - .355 tip (97g) 3B2H
$24.50
In Stock
R Flex 35.5" (Wedge) - .355 tip (97g) 3B2H
$24.50
In Stock
S Flex 39.0" (#3 Iron) - .355 tip (97g) 4B2H
$24.50
In Stock
S Flex 38.5" (#4 Iron) - .355 tip (97g) 4B2H
$24.50
In Stock
S Flex 38.0" (#5 Iron) - .355 tip (97g) 4B2H
$24.50
In Stock
S Flex 37.5" (#6 Iron) - .355 tip (97g) 4B2H
$24.50
In Stock
S Flex 37.0" (#7 Iron) - .355 tip (97g) 4B2H
$24.50
In Stock
S Flex 36.5" (#8 Iron) - .355 tip (97g) 4B2H
$24.50
In Stock
S Flex 36.0" (#9 Iron) - .355 tip (97g) 4B2H
$24.50
In Stock
S Flex 35.5" (Wedge) - .355 tip (97g) 4B2H
$24.50
In Stock
Pureing 
1-3 $15.50
4+ $13.50
Tip & Butt Trimming
$4.95
Tip Prepping
$2.95

Nippon Pro N.S. Pro 8950GH Steel Iron Shafts

  • Ultralite 97 gram iron shaft designed for golfers of all skill levels who find traditional steel models too heavy to swing naturally, yet find traditional graphite iron shafts too light to control.
  • Features a constant weight system for uniform feel with each iron in the set.
  • Mid Bend Point yields a mid/high launch profile.
  • Available in both .370" Parallel and .355" Taper Tip iron shafts.
  • Trimming Instructions

    Nippon Shaft Specifications

Nippon Pro N.S. Pro 8950GH Steel Iron Shafts is rated 4.6 out of 5 by 1922.
Rated 5 out of 5 by from senior flex! Re shafted by old Ping eye II heads 4 iron through Wedge and they are great took all of the shock out of the shots and since i can swing them easier it's much more fun!
Date published: 2015-07-09
Rated 4 out of 5 by from Great shaft Perfect shaft for a lot of senior golfers that think graphite is too light.
Date published: 2015-11-07
  • y_2016, m_11, d_24, h_10
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_1, tr_1921
  • loc_en_US, sid_NP0005, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

Will this shaft fit Cobra S3 irons?

Asked by: mjc1xx
Yes it will fit. Cobra used a .355" tip diameter shaft in their S3 irons.
Answered by: JimY
Date published: 2016-11-14

Thinking about soft-stepping the 8950GH 0.355 Regular rather than going to senior flex. In your opinion, what would be the result?

Asked by: RJM
Soft stepping one club will make the shafts play approximately a quarter of a flex more flexible. Soft stepping 2 clubs will be approximately a half a flex. These shafts do test and play a little more flexible then normal so soft stepping the R flex might not be a bad idea.
Answered by: JimY
Date published: 2016-10-14

difference between 850 GH 355 tt and 8950GH tt shaft? (sr. flex)

Asked by: chuck
In looking on Nippon's web site the 850GH shafts are lighter then the 8950GH. the 850GH R flex is listed at 87 grams where the 8950GH is listed at 97 grams. The 850GH is listed as a mid bend point shaft and the 8950GH R flex is listed as a mid/high trajectory shaft which would be a mid/low bend point. Nippon does not lists the 850GH as being available in a senior flex. http://nipponshaft.com/product/steel_850gh.php
Answered by: JimY
Date published: 2016-09-26

68 years........6 iron goes 150 Playing Nike Covert Forged 2.0 with stock regular 950GH. Thinking of installing 8950GH senior shaft . Would like to not work quite as hard. Will changing to the 8950GH SENIOR make a difference ?

Asked by: georgie boy
The flex change should help. The 8950GH plays more flexible then the 950GH even in the same flex.
Answered by: JimY
Date published: 2016-09-06

I currently play the Callaway Apex CG16 irons with project X 4.5 graphite shafts. Would the new Nippon 7 series be a better fit to keep the clubs light than the Nippon Pro 8950 Steel?? Which would you recommend for better dispersion and distance.

Asked by: suzieq
From the specifications I see on the Project X 4.5 graphite iron shafts they are listed as 91 gram weight shaft and they are designed to produce a low ball flight. The Nippon Zelos 7 would definitely be a lighter weight shaft but the 8950GH would actually be similar in weight. I would expect the Zelos 7 shafts to play a little more flexible then the 8950GH in the same flex and the 8950GH R flex will probably be a little closer in flex to the Project X 4.5. The information I have lists the Apex CF16 irons as using a .370" tip diameter shaft.
Answered by: JimY
Date published: 2016-08-23

I need a nippon 950gh stiff shaft for a 4 iron.  Which is the correct shaft for me to purchase?

Asked by: tweinstock

Are Nippon 8950GH iron shafts to be butt trimmed to lenght?

Asked by: Wheez
  • 2016-12-02T07:51CST
  • bvseo_cps, prod_bvqa, vn_cps_3.4.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_7
  • loc_en_US, sid_NP0005, PRD, sort_recentAnswersFirst
  • clientName_golfworks