Ping I20 and G Series Shaft Adaptors

Ping I20 and G Series Shaft Adaptors


Ping I20 and G Series Shaft Adaptor - .335" -
$2.29
In Stock
Ping I20 and G Series Shaft Adaptor - .350" -
$2.29
In Stock

Ping I20 and G Series Shaft Adaptors

Ping shaft adaptor designed for the I20 and all the G series drivers and fairways. Also fits the Ping Rapture and Rapture V2 drivers. Available in both .335" and .350".

Ping I20 and G Series Shaft Adaptors is rated 4.8 out of 5 by 272.
Rated 4 out of 5 by from Ping i20 and G-series shaft adaptors These make it easy to adapt your shaft to the Ping i20 and G-series metalwood heads. The fit is good. My only nit might be the fact that the ferrule head is slightly larger than the my G20 driver hosel so I needed to sand it after install and then use acetone to polish the ferrule. Would like to see them fit exactly so I didn't need to perform this additional step. But not a big deal.
Date published: 2015-10-22
Rated 5 out of 5 by from Shaft adapter works perfectly I reshafted my G15 driver with a more flexible shaft. The adapter worked flawlessly in fitting a .335 shaft into the G15 .350 head. The club is perfect for me reduced swing speed
Date published: 2015-07-09
  • y_2016, m_11, d_24, h_9
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_272
  • loc_en_US, sid_BB9048, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

Where can I buy a Ping G30 Driver shaft regular flex TFC 419i with +1" length

Asked by: Dan
Ping would be the only place you can gets the TFC 419i shafts. These shafts are made exclusively for Ping. You would have to send your driver back to Ping to have there shafts installed.
Answered by: JimY
Date published: 2016-11-28

I have a G30 3 metal and want to change the factory shaft with another that I have with a .350 shaft. What do I need for tip adaptor, ferrule, and etc.?

Asked by: Ted6777
You would need a Ping shaft adaptor for the G30 that would accept a .350" tip diameter shaft. Ping does not make a shaft adapter for a .350" tip size shaft. We possibly can special order an aftermarket shaft adapter for the Ping that accepts a .350" tip diameter shaft. You would need to contact our Customer Service Department at 1-800-848-8358 or by email at golfworks@golfworks.com
Answered by: JimY
Date published: 2016-11-28

do these work for the g series irons and crossovers as well? the one pictured on the right looks correct.

Asked by: richard waggle
No the BB9048 adapters are for drivers and fairway woods only. For the G Series irons and Crossovers you should be able to use the BB9047. It should fit these irons as well as the I20 irons etc. The G Series irons and Crossover irons use a .355" taper tip shaft. http://www.golfworks.com/ping-anser-i-20-355-iron-ferrules/p/BB9047/
Answered by: JimY
Date published: 2016-11-21

what size adapter do I need for a g2 ping 3 wood

Asked by: john
If you are installing a .335" tip diameter shaft you would order the BB9048 for the .335" size. If you are installing a .350" tip diameter shaft you would use the .350" size.
Answered by: JimY
Date published: 2016-09-26

I am reshafting my Ping G20 Driver which has a .350 I.D. Hosel with a new .335 shaft.  Which shaft adapter do I need to order?  Thanks

Asked by: Vclay
You will use the BB9048 and order the one listed for the .335" size. http://www.golfworks.com/ping-i20-and-g-series-shaft-adaptors/p/BB9048/
Answered by: JimY
Date published: 2016-08-30

I want to adapt a .335 shaft to ping g 20 .350 hosel Which adapter>?

Asked by: E L
You will use the BB9048 and order the one listed for the .335" size. http://www.golfworks.com/ping-i20-and-g-series-shaft-adaptors/p/BB9048/
Answered by: JimY
Date published: 2016-08-29

I am having my Ping 120 reshafted at Dick's. The Pro there says he is going to use a shim. Does that mean that he doesn't have the right size adapter?

Asked by: Joeyc113
Dick's does not stock the BB9048 Ping Adaptor. They would have to special order it from us. They could also reshaft using our brass shim (SHIM15) and a standard ferrule. It will accomplish the same thing and work just as well. http://www.golfworks.com/the-golfworks-brass-adaptor-shims/p/SHIM/
Answered by: JimY
Date published: 2016-07-25

I have a Ping i20 strong 3 wood which I would like to re-shaft. What is the tip size?

Asked by: Chuck
The Ping I20 3 wood uses a .350" tip diameter shaft. To install a .335" tip diameter shaft you will use .335" adaptor.
Answered by: JimY
Date published: 2016-07-11
  • 2016-12-04T07:30CST
  • bvseo_cps, prod_bvqa, vn_cps_3.4.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_27
  • loc_en_US, sid_BB9048, PRD, sort_recentAnswersFirst
  • clientName_golfworks