Pressurized Golf Grip Remover

Pressurized Golf Grip Remover


GS6 - Pressurized Grip Remover
$69.99
In Stock
GSP - Grip Shooter Pump (Metal)
$29.99
In Stock
GSPP - Grip Shooter Pump (Plastic)
$29.99
In Stock
GSRK - Grip Remover Repair Kit
$6.99
In Stock
HOSE - Replacement Extension Hose
$14.99
In Stock
NECV - Grip Needle Cover
$1.55
In Stock
Grip Shooter Needles (5 pack)
$13.99
In Stock
Industrial Grip Shooter Needle (Qty 1)
$5.99
In Stock

Pressurized Golf Grip Remover

Now you can remove a grip, add build-up tape to correctly size it, and then reinstall keeping the grip in perfect playing condition! Ideal for a repair shop or clubmaker. This durable pump holds lots of solvent. Convenient cap for needles minimizes breakage. Five 18-gauge needles and extension hose are included. Please Note: The GolfWorks Grip Solvent works best with this tool. DO NOT USE perchlorethylene as it dissolves neoprene seals. To prevent damage to seals, store all liquid in another container.

Replacement Parts:

  • #GSP - Grip Shooter Pump (Metal) - $29.99
  • #GSPP - Grip Shooter Pump (Plastic) - $29.99
  • #GSRK - Grip Remover Pepair Kit - $6.99
  • #HOSE - Replacement Extension Hose - $14.99
  • #NECV - Grip Needle Cover - $1.55
  • #IGSN5 - Needles (5 pack) - $13.99
  • Repair Service (Please Call) - $19.99
  • Please Note: Replacement Grip Shooter needles are no longer available for sale as a single item. They are now sold in a less expensive package of 5.

    Pressurized Golf Grip Remover is rated 2.4545454545454546 out of 5 by 11.
    Rated 5 out of 5 by from great - Wednesday, June 25, 2008 Failure Reviewed By: Danny (Australia, Queensland) When I purchased this remover, it had a metal base on the buy page. When it arrived it was a plastic base. I had to modify the spring and ballbearing to allow it to work, and yes both the hose and needles failed or broke or caused solvent to leak when pumping the trigger. It wasnt worth it to return it from Australia as it would have been cheaper to buy another one. I now use it without the hose extension, have refitted more appropriate O rings for sealing and also gasket tape to maitina pressure and stop the leaks { you actually bougt the plastic one there are 4 diff. types good luck
    Date published: 2011-03-16
    Rated 2 out of 5 by from Failure When I purchased this remover, it had a metal base on the buy page. When it arrived it was a plastic base. I had to modify the spring and ballbearing to allow it to work, and yes both the hose and needles failed or broke or caused solvent to leak when pumping the trigger. It wasnt worth it to return it from Australia as it would have been cheaper to buy another one. I now use it without the hose extension, have refitted more appropriate O rings for sealing and also gasket tape to maitina pressure and stop the leaks
    Date published: 2008-08-08
    Rated 5 out of 5 by from Works great! I have a small business at my home and repair golf clubs. I am very pleased with the Pressurized Golf Grip Remover and it's quality. It works better than expected and has added to what work I can do for my customers. Highly recommended.
    Date published: 2015-10-04
    Rated 2 out of 5 by from Does the job Gets the job done. We used these at the Golf Academy and never had any problems with them...When I got mine and finally got it pressurized, it leaks through the tube quite a bit and it never stays pressured up. I'm not sure why?
    Date published: 2015-12-27
    Rated 1 out of 5 by from Suction from the source practically non existant! Recent purchase; I need to return for exchange. Apparently the ball bearing at the source of suction is not working as designed. I have cleaned it 3 times and still does not work. So it's of no use at this time.
    Date published: 2015-06-15
    Rated 1 out of 5 by from Always faulty I bought this product a few times already. Don' seems to last. And when i bought parts to replace, they are of different models. The bottle and pump size dont matched
    Date published: 2016-02-18
    Rated 5 out of 5 by from A must have in your workshop The best tool for removing and saving expensive grips which have been installed using double sided tape.
    Date published: 2015-05-12
    Rated 1 out of 5 by from Doesn't work Have not been able to get it to pressurize so have not been able to use it.
    Date published: 2015-05-07
    • 2016-07-25T07:44CST
    • bvseo_cps, prod_bvrr, vn_cps_3.3.0
    • cp_1, bvpage1
    • co_hasreviews, tv_0, tr_11
    • loc_en_US, sid_GS6, PRD, sort_relevancy
    • clientName_golfworks

    Bought one here few years ago, worked well last time I used it (maybe 3 months ago), i need to remove a Cameron grip, now cant get the solvent 2 come out needle end, keep pumping but wont come out, advice on getting solvent to start moving again?

    Asked by: Homie
    Here is the link to the instructions for the Grip Shooter (GS6). Scroll down to the trouble shooting guide to show you how to clean the gun to get it working again. Some solvents have additives that will gum up the spring and ball bearing. I carefully remove the brass fitting and carefully remove the spring and ball bearing and clean them with Acetone and reinstall them and the brass fitting. I use a paper towel to cover the hole in the needle and pump the grip to prime the gun and it should work fine again. If you do not use the gun that often it is best to remove the solvent and store the gun empty. http://www.golfworks.com/images/art/GS6.pdf
    Answered by: JimY
    Date published: 2016-07-21

    how does it work?

    Asked by: john p
    Here is the link for the step by step instructions. http://www.golfworks.com/images/art/GS6.pdf
    Answered by: JimY
    Date published: 2016-06-24

    I purchased this item from you but I dropped it and the hose and needle both broke. What can I do?

    Asked by: JimyB
    It would be best for you to contact our Customer Service Department. You can contact them at 1-800-848-8358 or by email at golfworks@golfworks.com.
    Answered by: JimY
    Date published: 2016-03-23

    CAN U USE THIS WITHOUT THE HOSE

    Asked by: don
    Yes the Grip Shooter can be used without the hose.
    Answered by: JimY
    Date published: 2016-03-14

    Can I purchase a replacement plastic bottle?

    Asked by: Butch73
    Yes we do. The order code is GS6CP and the cost is $15.00. You may need to call in this order since it does not show up on our web site. 1-800-848-8358
    Answered by: JimY
    Date published: 2016-03-28

    I just bought new needles and they don't fit my metal container

    Asked by: the real pro
    If you have an older metal grip shooter the needles for the new plastic gun do not fit and we no longer have any needles that will fit those older guns. I personally have an older metal grip shooter that I had for years and can no longer get needles to fit it.
    Answered by: JimY
    Date published: 2015-12-31

    does the plastic grip needle pump fit on a metal can?

    Asked by: the real pro
    If you have an older metal grip shooter the needles for the new plastic gun do not fit and we no longer have any needles that will fit those older guns. I personally have an older metal grip shooter that I had for years and can no longer get needles to fit it.
    Answered by: JimY
    Date published: 2015-12-31

    what is a grip shooter metal? years ago a bought a grip remover metal cannister. I bought 5 needled and they don;t fit the metal cannister.

    Asked by: john boehme
    The pumps in the older grip shooters had different thread sizes and the newer needles will not work. I have one of the older ones myself and had to get a new pump a few years ago. We no longer have the metal grip shooters, just the plastic cannister ones and the pump from the newer grip shooter will not fit the metal cannister. At this point you will have to get a new Grip Shooter.
    Answered by: JimY
    Date published: 2015-10-12
    • 2016-07-25T07:49CST
    • bvseo_cps, prod_bvqa, vn_cps_3.3.0
    • cp_1, bvpage1
    • co_hasquestionsanswers, tq_26
    • loc_en_US, sid_GS6, PRD, sort_recentAnswersFirst
    • clientName_golfworks