SEARCH Search GolfWorks
  GolfWorks Canada | Online Catalog | Find the Right Golf Shaft Become a Fan of the GolfWorks
True Temper TT Lite XL  Steel Iron Shafts

True Temper TT Lite XL Steel Iron Shafts

Tell a Friend about this item

Item to Purchase
Product Name Price Status Qty
R 40.0 (#1) - .355 tip (113g) 3B2M $10.99 In Stock
R 39.5 (#2) - .355 tip (113g) 3B2M $10.99 In Stock
R 39.0 (#3) - .355 tip (113g) 3B2M $10.99 In Stock
R 38.5 (#4) - .355 tip (113g) 3B2M $10.99 In Stock
R 38.0 (#5) - .355 tip (113g) 3B2M $10.99 In Stock
R 37.5 (#6) - .355 tip (113g) 3B2M $10.99 In Stock
R 37.0 (#7) - .355 tip (113g) 3B2M $10.99 In Stock
R 36.5 (#8) - .355 tip (113g) 3B2M $10.99 In Stock
R 36.0 (#9,PW,SW,LW) - .355 tip (113g) 3B2M $10.99 In Stock
S 40.0 (#1) - .355 tip (118g) 4B2M $10.99 In Stock
S 39.5 (#2) - .355 tip (118g) 4B2M $10.99 In Stock
S 39.0 (#3) - .355 tip (118g) 4B2M $10.99 In Stock
S 38.5 (#4) - .355 tip (118g) 4B2M $10.99 In Stock
S 38.0 (#5) - .355 tip (118g) 4B2M $10.99 In Stock
S 37.5 (#6) - .355 tip (118g) 4B2M $10.99 In Stock
S 37.0 (#7) - .355 tip (118g) 4B2M $10.99 In Stock
S 36.5 (#8) - .355 tip (118g) 4B2M $10.99 In Stock
S 36.0 (#9,PW,SW,LW) - .355 tip (118g) 4B2M $10.99 In Stock
Shaft Service - Add. Cost
Please specify hosel depth, playing length and club head type in the "Notes" at Checkout

Pureing 1-3 $15.50
4+ $13.50
Tip & Butt Trimming $4.95
Tip Prepping $2.95

Buy the complete Set
Product Name Price Qty
R TT Lite XL #3-PW .355 Tapered Set $87.92
S TT Lite XL #3-PW .355 Tapered Set $87.92
  • Product Description
  • Reviews
  • Questions & Answers
True Temper TT Lite XL Steel Iron Shafts

The True Temper TT Lite XL steel iron shaft is a great choice for any bore-through iron head.

  • The mid-flex, longer length design can be built substantially longer than "standard length" without requiring a butt extension

Trimming Instructions

True Temper TT Lite XL Steel Iron Shafts is rated 5.0 out of 5 by 1.
Rated 5 out of 5 by from Excellent for Ping re-shaft I have reshafted 2 sets of Ping irons with the TT lite xl tapered tip shafts. Playability is excellent and the price is outstanding. If price were no issue, I'd have tried the new XP series iron shafts, but these work well enough. Ball trajectory is mid flight and distance is repeatable and reliable. There is no excess spin in the wedges and there is no trouble getting the proper long iron trajectory. There is no extra yardage built into these shafts, but in my most recent build, I soft stepped the Ping ISIs by one shaft. Trajectory is a bit better and the ball comes off the club softer and with excellent control. The ISIs with the original JZ stiff cushion shaft were just too unpleasant and too much work. They now play great.
Date published: 2014-09-03
  • 2015-07-07T07:36CST
  • bvseo_cps, prod_bvrr, vn_cps_3.1.5
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_1
  • loc_en_US, sid_2XLI, PRD, sort_relevancy
  • clientName_golfworks

Is this only for bore through irons, or would it fit an iron like a Ping or Nike?

Asked by: Gmc357
To add a little more information on these shafts the UTXLIC can be used in a bore through iron such as the Callaway but by following the trimming instructions it can also be used in a non-bore through clubhead. This shaft is for clubheads that use .370" parallel tip shafts. Ping uses only .355" taper tip shafts and Nike uses both .370" and .355" shafts in various iron designs. The 2XLI is the .355" taper tip version and was never altered for bore through installation. It can be used in both Ping or Nike irons that currently use a .355" taper tip shaft.
Answered by: JimY
Date published: 2015-05-15

need tt lite in regular flex

Asked by: Rope
For the 2XLI TT Lite XL .355" taper tip you will need to specify the club number you are reshafting to get the correct length shaft in either R or S flex. You will see that information at this link. With .370" parallel tip TT Lite XL's they come in a combination flex shaft that would be trimmed following the trimming instructions to create an R or S flex for the club number you are installing the shaft into. The brand and model of club that you have will determine which shaft you need to order.
Answered by: JimY
Date published: 2015-05-04

Can I tip trim the shafts to reflect a firm flex that is between a stiff and a regular a regular flex?

Asked by: Scoop
The 2XLI is a .355" taper tip shaft that is designed to fit into a .355" tapered hosel bore. A .355" taper tip measures .355" at the tip end of the shaft and tapers out to approximately .370" where the shaft exits the top of the hosel. If you tip trim a taper tip this shaft it will no longer fit into the .355" taper hosel bore. TT Lite XL iron shafts have always played and tested as being stiffer then normal so an R flex already plays closer to an S flex just using normal assembly instructions.
Answered by: JimY
Date published: 2015-01-29

is the 38.5 #4 .355 tip 113g 3B2M iron shaft a tapered tip ?

Asked by: Chuck46
Yes it is. The .355" is the standard tip size for a taper tip iron shaft.
Answered by: JimY
Date published: 2015-01-14

where is the trim shaft code

Asked by: Jray
The 2XLI are taper tip shafts and are butt trim only. The trimming instructions are located under "Expert How To's" in the right hand nav column on the GolfWorks home page. The 2XLI has a trim code of IR1, which indicates, butt trim only.
Answered by: GW2002
Date published: 2015-01-12

I was told once that the TTLite was closest to Hogan Apex shafts. Is this true? if not, what is?

Asked by: cosmo
No that is not true. The shaft weights were similar but that is all. The True Temper Dynalite or Dynalite Gold's were always considered the best replacement for the Hogan Apex shafts. True Temper has discontinued the Dynalite series of shafts. For 2015 True Temper is introducing a XP 115 shaft that to me would make the best replacement for the Apex shafts.
Answered by: JimY
Date published: 2015-01-06

I have Callaway S2H2 Irons which are bore through Irons, is it possible to cut the end of the shaft so that it fits into the head of my club

Asked by: catdel
The S2H2 irons took a .370 parallel tip shaft, so as long as the shaft you are putting in the head is .370" tip, you should have no problem. Since it was a bore through, you would trim 1" less from the tip than the trimming instructions call for to maintain the flex of the shaft you choose. for example, if a shaft calls for a tip trim of 2" for instance, you would only trim 1" since the head is a bore through design.
Answered by: GW2002
Date published: 2014-11-19

I need a putter shaft for an odyssey putter.Putter tip fits in the shaft.

Asked by: Raye
If the particular Odyssey putter that you have uses a straight putter shaft, not a double bend, then it will take a .370" parallel tip shaft. The TT Lite XL (UTXLIC) could be used but the 2XLI will not fit properly.
Answered by: JimY
Date published: 2014-11-17
  • 2015-07-07T07:37CST
  • bvseo_cps, prod_bvqa, vn_cps_3.1.5
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_9
  • loc_en_US, sid_2XLI, PRD, sort_recentAnswersFirst
  • clientName_golfworks