SEARCH Search GolfWorks
  GolfWorks Canada | Online Catalog | Find the Right Golf Shaft Become a Fan of the GolfWorks
Golf Club Iron Ferrules - Black

Golf Club Iron Ferrules - Black

Tell a Friend about this item

Product Name Price Status Qty
59PI Dozen - Black Short .370" Iron Ferrules $2.49 In Stock
60PI Dozen - Black Std .370" Iron Ferrules $2.49 In Stock
74PI Dozen - Black Long .370" Iron Ferrules $2.49 In Stock
61PI Dozen - Black X-Long .370" Iron Ferrules $2.49 In Stock
Dozen Rubber O-Rings $2.25 In Stock
65TI Dozen - Black Std .355" Iron Ferrule $2.49 In Stock
66TI Dozen - Black Long .355" Iron Ferrule $2.49 In Stock
67TI Dozen - Black X-Long .355" Iron Ferrule $2.49 In Stock
59PI Single - Black Short .370" Iron Ferrule $0.35 In Stock
60PI Single - Black Std .370" Iron Ferrule $0.35 In Stock
74PI Single - Black Long .370" Iron Ferrule $0.35 In Stock
61PI Single - Black X-Long .370" Iron Ferrule $0.35 In Stock
65TI Single - Black Std .355" Iron Ferrule $0.35 In Stock
66TI Single - Black Long .355" Iron Ferrule $0.35 In Stock
67TI Single - Black X-Long 67TI .355" Iron Ferrule $0.35 In Stock
  • Product Description
  • Reviews
  • Questions & Answers
Golf Club Iron Ferrules - Black


A complete selection of ferrules with modern outside diameters that match perfectly to the outside diameter of our hosels. All ferrules have a 19° countersink which allows a cushion of epoxy to form between the top of the hosel and the inside of the ferrule, strengthening the bond. Each ferrule also is “pre-washed,” arriving at your shop with a high-gloss finish and no need for an acetone wipe to make it shine!

Golf Club Iron Ferrules - Black is rated 4.0 out of 5 by 1.
Rated 4 out of 5 by from 60PI 0.370" Iron Ferrules Purchased these so I could reshaft a 0.370" parallel tip hybrid. They fit very tight onto a 0.370" parallel tip shaft so make sure you have a tool to install them or you will get frustrated or damage your shaft. I drilled a 3/8" hole in a 1" block of wood and used that to get the ferrule started and then finished the insertion by placing the club head on the shaft and hitting down on it until the shaft was fully seated into the club (~1.5"). Be sure to have your tip weights installed first as once these ferrules are on, they can only be removed by cutting them off - I've had to do that before. These could be made a little looser to make the install easier. Otherwise they look good and are exact to sizing. They work much better for 0.355" taper tips.
Date published: 2015-11-05
  • 2015-11-26T07:43CST
  • bvseo_cps, prod_bvrr, vn_cps_3.1.6
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_1
  • loc_en_US, sid_60PI, PRD, sort_relevancy
  • clientName_golfworks

Hi, I'm looking to change shafts on a set of Callaway x-22's,some O rings are thin or smaller in the 68WIR rings match up with the ?Callaway O Rings? Also, I'm told the x-22 irons are no longer a bore thru, but a plug...sound right? Thx, gp-par

Asked by: gp par
The 68WIR O-ring ferrules that we sell are a little thicker however they are not the same as the Callaway O-ring ferrule in that the Callaway ferrule has a collar that extends down inside the clubhead. Personally I would recommend the BB9003 ferrules for the Callaway irons. They are a different shape but have the collar. The X22 irons are not a bore through, just a plug at the bottom as you mentioned and it should not come out during reshafting.
Answered by: JimY
Date published: 2015-11-17

will this ferrule workon a double bend shaft going to a odyssey white hot 2 ball putter head

Asked by: Tugboat
The 68WIR, O-ring ferrule and the 59PI would work. I am not sure if Odyssey used a collared ferrule on these putters. If they did then the BB0004 should work.
Answered by: JimY
Date published: 2015-11-17

I am going to change the shafts For the Callaway XR Pro Fairway woods. I would like to keep the clubs looking like original. The ferrules that I have are to short. Can you tell me what ferrules I need?

Asked by: Drakester
In looking at a picture of the Callaway XR Pro Fairway woods the stock ferrule was plain black and it looks to be a little longer. I would suggest either the 61PW which is approximately 3/4" long or the 60PW which is 1/2" long.
Answered by: JimY
Date published: 2015-10-26

Hi JimY! Do you really mean 61PW which is a wood ferrule for .335 tip? The True Temper Dynamic Gold Spinner Wedge Shaft is .355? Sorry for being confused.

Asked by: NMYR
I think Jim just made a typo. The 61PI (.370") has an O.D. of .540" which is closer to the O.D. of the Tricept wedges (.531"). This will require less work to finish the ferrule. A .370" will work on a .355 shaft due to the fact that .355" shafts taper to .370" about 1 1/4" up the shaft.
Answered by: Admin
Date published: 2015-09-16

I'm thinking of using the True Temper spinner shaft in the Tricept MG Tech Wedge and wonder if the 61Pi ferrule will work better than a .355 ferrule?

Asked by: NMYR
The 61PW will work with the TT Spinner shaft and fit the outside diameter closer then the taper tip ferrules. A .355" taper tip shaft tapers out to approximately .370" where the shaft exits the top of the hosel.
Answered by: JimY
Date published: 2015-09-16

Do you have a Taylormade Burner driver ferrule. I think it's a?PARRLLEL .350 FERRULE but not sure.

Asked by: bettyboop
You will need the BB9009 Taylor Made Adaptor Ferrule for the Burner.
Answered by: JimY
Date published: 2015-07-06

What would be the replacements for the Vokey SM5 wedges. I am going from steel to graphite. ?Also for the Callaway XR pro irons??

Asked by: Longwood50
The Vokey wedges use a longer ferrule more like the 61PI and the XR Pro irons more like the 74PI. Even though both the Vokey wedges and XR Pro irons use .355" taper tip shafts you can still use .370" ferrules because the shaft taper out to approximately .370" where the shaft exits the top of the hosel and the parallel tip ferrules will more closely match the outside diameter of these clubs.
Answered by: JimY
Date published: 2015-07-06

hi, i bought some ferrules before and they were marked as FR1015 , which one is it in your list, ? can i buy them in bulk ??

Asked by: Piranha Golf
Please contact our customer service dept for more information on this ferrule. We will review your past purchases with us to locate the exact ferrule model that you would like to order. Code FR1015 is not a code that we use on our ferrule packages. Ferrules are sold in quantities of 12 per package.
Answered by: Kevin F
Date published: 2015-04-10
  • 2015-11-26T07:44CST
  • bvseo_cps, prod_bvqa, vn_cps_3.1.6
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_14
  • loc_en_US, sid_60PI, PRD, sort_recentAnswersFirst
  • clientName_golfworks