The most UNIQUE iron shaft in the industry. Designed to compete with the performance of premium steel shafts.
The Tour X irons combine a patented metallic coated fabric over a graphite shell which results in 95g and 105g weight shafts that do not have the excessive wall thickness and dead feel of similar weighted 100% graphite iron shafts.
The shock dampening graphite core, combined with the metallic coated surface layer produce a unique feel and unparalleled performance.
AXE XCaliber Tour X Graphite Irons Shaft is rated
4.6 out of
Rated 5 out of
Great shaft!I put a set of these in my irons and wedges a few months ago. My reason was to remedy some elbow issues I've had the last 2 years, and I thought going to graphite was a good answer. I love the feel of these sticks. Yes, it's a little muted, and yes, it's unique. But the performance speaks for itself. Great trajectory, feel, and distance. I really didn't see a difference in yards and trajectory over my old shafts (FST Pro 125s, still a very good shaft), but the feel is unmistakable. And my elbows will tell you that. The heads may change, but these shafts will probably stay in the bag for awhile.
Date published: 2014-09-14
Rated 4 out of
Solid ShaftVery solid feeling shaft similar to the steelfiber but with a softer feeling tip, which was what I didn't like about the SF. Tested an 95g Reg against an Xcal SL in two S56 7i, side by side , same length, swingweight, grip, loft, only difference was the shaft. Slightly higher launch angle with higher spin rates than the SL and a little tighter dispersion.About 5-7 yds more carry on ave than the SL
Date published: 2014-05-21
Rated 5 out of
Wow!I put together 2 sets of the 85 gram shafts, one for my customer in in regular flex and one for me in stiff. Simply, amazing shafts. First, we both score in the 70's are 61 and 60 years old. We get compliments on the looks everywhere,but the performance of this shaft is what stands out. Both of us are 1 club longer, hit it higher, but accuracy is what makes this shaft a pure winner. Aim it, make your swing and hit your target. We switched from DG Lite shafts and installed them to the Maltby MMB-17 irons. Try a demo with one shaft and see for yourself. Thanks Robin and thank you Golfworks.
Date published: 2015-04-20
Rated 4 out of
"Unique" is appropriate...The description for this shaft states "unique" to describe the feel. I would say that's appropriate as it's nothing like I have hit before. I purchased the TS flex and it's feels like it has an active tip from just before, through, and just after the hitting zone. I am a high ball hitter though the trajectory is mid-low boring from the tee, rough and fairway. I believe it's a great blend of steel and graphite and you should expect the feel associated with that blend. Pure muted if I had to describe it. If you like something that draws attention out of the bag, this is it. This thing is good looking and I am really excited to continue playing it. I paired the shaft it have Maltby KE4 HDI 17* and so far it's great. AXE has a very good product here and I hope it continues to work out well for me
Date published: 2014-05-18
Rated 5 out of
Nice ShaftsI have purchased two sets of these now and they perform very well! They look amazing and feel great. Distance is comparable to other graphite shafts I have owned and the ball flight is slightly lower than most.
Date published: 2015-05-16
bvseo_cps, prod_bvrr, vn_cps_3.1.5
co_hasreviews, tv_0, tr_5
loc_en_US, sid_AS0036, PRD, sort_relevancy
this shafts are bigger than 370 how come? irons and ferrules would not go on. had to sand shafts to make it work.
Asked by: meme
All shafts have tolerances and it is not unusual for the diameter to be a .005" over. As far as sanding to fit, we never advise sanding down a shaft below the accepted under tolerance, but you are suppose to "prep" shaft before installation, which involves lightly sanding the tip of the shaft that is going inside the hosel. This roughing up of the shaft makes the epoxy adhere better to the shaft and should always be done, steel or graphite shafts.
Answered by: GW2002
Date published: 2015-05-28
Just received asoo36 shaft 95s, not to familiar with the tip trimming. Does this shaft need tip trimming? I read the instructions that came w shaft , my understanding from what I read is no trimming is needed . Can you please give me some advice?
Asked by: Rob74
Yes there is tip trimming required with this shaft. You will follow trim code IR20 from the Iron Trim Chart.
It will tell you the following trimming is needed.
3 iron = 0"
4 iron = 1/2"
5 iron = 1"
6 iron = 1 1/2"
7 iron = 2"
8 iron = 2 1/2"
9 iron = 3"
Wedges = 3"
Answered by: JimY
Date published: 2015-05-18
What is the back order timeframe on the 85gr is stiff?
Asked by: Housemonk2
The Xcaliber 85 S flex is due in stock around March 13th.
Answered by: Admin
Date published: 2015-02-13
can tip weights be used in these shafts?
Asked by: victmor
When are you going to have a similar offering in a taper tip? I would order these today if they were available, but I'm not boring out my heads to fit, and the non-tour xcalibers are too light at 85g.?