Project X Rifle Taper Tip Iron Shafts is rated
4.0 out of
Rated 4 out of
Project X Rifle Flighted 6.0Changed from Dynamic Gold S300 to the 6.0 Rifle Flighted. Good quality shafts, stiffer than my DG S300's. Spined them and there were some shafts with a mild spine and some with a more prominent spine. Overall a good shaft, haven't played them long enough to have a feel regarding the trajectory.
Date published: 2013-06-06
bvseo_cps, prod_bvrr, vn_cps_3.1.1
co_hasreviews, tv_0, tr_1
loc_en_US, sid_RP0009I, PRD, sort_relevancy
I have Mizuno MP60 wanting to go with the Recoil 95, which ferrule would I need to work best with these heads? Would I need to add any weight with the shaft being standard length? Trying to achieve a D0 swingweight. If so which weight?
Asked by: Colonel B
We have a demo 7 iron in our school assembled with the Recoil 680 F4 (S flex) at 37.5" with a 50 gram grip and head weight of 268 grams that has a D1 swingweight. 37.5" would be 1/2" longer then most steel shafted 7 irons so to maintain standard length you may need to add some weight to come out at D0.
Answered by: JimY
Date published: 2015-04-13
diff. between 5.0 5.5 project x
Asked by: ppig
5.0 is equivalent to R+ or firm regular(R400). 5.5 is equivalent to standard stiff flex (S300)
Answered by: Kevin F
Date published: 2015-03-27
Are these Rifle shafts ever available as a flighted set? Thanks
Asked by: Rcaccese
The Project X Rifle flighted sets were discontinued a few years ago, but we have a few sets available. We have the 5.5, 6.0, 6.5 in .370 parallel tip sets, and a few 5.5, 6.0 .355 taper tip sets available. The stock number for these flighted sets is RP14SET.
Answered by: GW2002
Date published: 2014-11-12
What is the weight of this shaft?
Asked by: TomG
The 5.0 and 5.5 flexes are 115 grams. The 6.0 and 6.5 flexes are 125 grams.
Answered by: Admin
Date published: 2014-10-28
What is puring, tip and butt trimming and tip prepping?
Asked by: Ladd
Please refer to this link for a detailed explanation of the SST PURE process. http://www.golfworks.com/article.asp?ai=495&eid=SSTPURE
To properly install a golf shaft into a golf club the shaft must first have the tip trimmed as per the manufactures instructions to achieve the proper flex. Once this is done the tip must be abraded (prepped) to ensure a good epoxy bond to the club head. Finally the shaft has to be cut to the desired playing length before installing the grip.
Answered by: Admin
Date published: 2014-10-10
Weight of the 5.0 shaft?
Asked by: jbf41
The weight of the Project X 5.0 shafts is 115 grams. If you scroll down to the bottom of the product page, the complete spec box is listed at the bottom of the page. http://www.golfworks.com/product.asp?pn=RP0009I