SEARCH Search GolfWorks
  GolfWorks Canada | Online Catalog | Find the Right Golf Shaft Become a Fan of the GolfWorks
Tour Lock Pro Weights

Tour Lock Pro Weights

Tell a Friend about this item

Product Name Price Status Qty
Tour Lock Pro 8 Gram Weight $5.99 In Stock
Tour Lock Pro 12 Gram Weight $6.49 In Stock
Tour Lock Pro 16 Gram Weight $6.99 In Stock
Tour Lock Pro 20 Gram Weight $7.99 In Stock
Tour Lock Pro 30 Gram Weight $8.49 In Stock
Tour Lock Pro 40 Gram Weight $8.99 In Stock
Tour Lock Pro 50 Gram Weight $9.99 In Stock
Tour Lock Pro 60 Gram Weight $11.99 In Stock
Tour Lock Pro 80 Gram Weight $13.99 In Stock
Tour Lcck Pro 100 Gram Weight $14.99 In Stock
Grip Modifier $19.99 In Stock
TLP 3/16" Wrench $1.00 In Stock
  • Product Description
  • Reviews
  • Questions & Answers
Tour Lock Pro Weights

Tour Lock Pro is a revolutionary weighting technology that allows every golfer to fine tune, personalize and enhance the performance of any golf club.

Testing shows that optimizing the weight of a club produces a more consistent, tighter ball contact dispersion with the clubface, raising the “power transfer ratio” resulting in greater distance, improved accuracy and better club head feel.

Now it is easy and affordable to fine tune every golf club in your bag. There are 8 TLP weights to choose from; 8 gm, 12 gm, 20 gm, 40 gm, 60 gm, 80 gm and 100 gm. Each weight is interchangeable and simple to install, which makes it easy to find the optimal weight for every club in the bag; from putter to driver.

Tour Lock Pro’s Patent Pending Innercore Clamping and End Cap Technology securely holds Tour Lock Pro weights in place with no chance of loosening or rattling.

The weight raises the balance point of the club increasing overall feel, while at the same time, dampening unwanted vibration, producing a better feel and a solid, sturdier club.

Tour Lock Pro conforms to U.S.G.A. and R & A Rules of Golf.

Tour Lock Pro Weights is rated 4.5 out of 5 by 4.
Rated 3 out of 5 by from NOT RECOMMENDED FOR GRAPHITE The inside diameter of graphite shafts is smaller than steel shafts. It was a tight squeeze for the modifier tool. After cutting through the grip I had to cut out the grip tape in order to get the tool inside the shaft. The cutter loosened some of the graphite fibers in one of the two shafts because of the tight fit. The wall thickness of graphite shafts is thick enough that the flange diameter could be reduced and the weight could be installed before the grip. I didn't think the cutter that made the recess worked that well either.
Date published: 2013-05-10
Rated 5 out of 5 by from GREAT PRODUCT I have these weights in my driver and my putter and I will not play without them anymore. The shot dispersion with the driver is so much tighter I can pick a target and just let her rip. It might fade or draw a little by it will not be far off the target line. With the right weighting the putter feels much more stable through impact.
Date published: 2013-11-04
Rated 5 out of 5 by from review I have my clubs 1 inch above standard. Because of this my swingweight was over D5. I needed the extra weight in the butt end. easy to install, as a matter of fact it takes all of 5 minutes. I just bought some more weights to finish out my set. Would highly recommend.
Date published: 2009-09-10
Rated 5 out of 5 by from Tour Lock Weights These weights are great. We use these for back weighting wedges, putters and drivers. This provides a great feel to putters and wedges for a better release and distance controll. This is a great product.
Date published: 2009-09-06
  • 2015-06-29T07:32CST
  • bvseo_cps, prod_bvrr, vn_cps_3.1.5
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_4
  • loc_en_US, sid_TL0001, PRD, sort_relevancy
  • clientName_golfworks

how do lock pro weights change swing weights

Asked by: bob 28
Generally, for every 4 grams of weight you add in the butt end of the club, you reduce the swingweight of the club by 1 swingweight point.
Answered by: GW2002
Date published: 2015-06-22

Tour lock pro, what is the OD of the 80 gram weight?

Asked by: john19
The OD of the 80 gram weight measures .498".
Answered by: JimY
Date published: 2015-06-11

What is a grip modifier

Asked by: yorktown
The grip modifier is used to cut the hole in the top of the grip so that the weights can be installed down inside the shaft.
Answered by: JimY
Date published: 2015-05-25

My irons are graphite shafted. They have been lengthened 11/2 over standard. TH shafts are Aerotec player spec. Will the tour lock system work with the these shafts without disturbing the graphite?

Asked by: golf1
Yes. As is always the case, be sure you remove all the grip tape before you put the weight in the shaft.
Answered by: Don S
Date published: 2015-04-17

I have an ?Taylormade R9 Driver with a Harrison Striper H2 shaft (46 inches). The grip is a Golf Pride Composition grip. What weight would be recommended? ??

Asked by: golf1
The weight reccomended for any club will be determined by your club speed. and what you feel most comfortable with in the grip. It is a balancing act between head weight, shaft weight, and swing speed.
Answered by: Don S
Date published: 2015-04-17

Does the drill bit come with the weight

Asked by: Sonny
The cutter or Grip Modifier as they call it is sold separately it is not included with the weights.
Answered by: JimY
Date published: 2015-04-16

How long is the 30 gram weight, 20 gram weight?

Asked by: steviek
In the Tour Lock Pro Weights the 30 gram is 2" long and the 20 gram weight is 1.75" long.
Answered by: JimY
Date published: 2015-04-14

Is the Tour Lock system for a set of irons?

Asked by: Wattso
The Tour Lock system is designed for use in irons or woods.
Answered by: GW2002
Date published: 2015-04-01
  • 2015-06-29T07:38CST
  • bvseo_cps, prod_bvqa, vn_cps_3.1.5
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_11
  • loc_en_US, sid_TL0001, PRD, sort_recentAnswersFirst
  • clientName_golfworks