Maltby Tour Grind MG Wedges
The Maltby MG Tour Grind Wedges were designed for the player that demands creativity around the greens. The sole design of the MG Tour Grind Wedges features a narrow sole with an exaggerated toe and heel Tour Grind making them the most versatile wedges ever designed under the Maltby brand. Micro Grooves (MG) have been CNC milled into the face to consistently increase spin around the greens. The Diamonized Black Metal finish is a very thin chemically implanted coating that is twice as durable as traditional nickel chrome plating and 30 times more durable PVD coatings typically found on modern black wedges. The DMB finish will not crack or peel when being bent to custom specs yet is so strong it will actually extend the sharpness and overall shape of the precision milled MG grooves vs. any other wedge finish currently available. If you desire a wedge that allows for the ultimate in consistency and creativity, the Maltby MG Tour Grind wedges are the answer!
- Form Forged from 1025 Carbon Steel for a soft feel and easy adjustability.
- Narrow sole width and relieved heel and toe Tour Grind for the ultimate is face angle manipulation.
- DBM Diamonized Black Metal finish is a chemically implanted finish that is more wear resistant, corrosive resistant, and scratch resistant than any current carbon steel finish available.
- MG groove technology (CNC milled) places more grooves on the face than traditional wedges, consistently increases ball spin on less than full shots.
- Available in 52(8), 56(11) and 60(7) loft and bounce options.
- Recommended ferrule 70PI
- Quick Ship Pak available Page ???
- Product Code - MA0233
Read the Customer Reviews for the Maltby Tour Grind MG Wedges
(5 customer reviews
Overall Rating: Write an online review
and share your thoughts with other customersSort Reviews: Newest
| Highest Rating
| Lowest Rating
- Thursday, August 22, 2013
Reviewed By: Steve J
First of all. These are the most beautiful wedges I have ever seen (all manufacturers included). I paired 52, 56 and 60 degree wedges with rifle spinner shafts with sensicore inserts. The feel, even on full swing shots is unmatched by any OEM. At Carl's Golfland, I demoed a vokey sm4, Cleveland 588, and Mizuno MP R-12 along with my Maltby MG Tour. The Maltby performed just as well as the others, but had a better feel. Perhaps due to the sensicore inserts. The grind on these wedges allow the skilled player to perform an arsenal of shots around the green. Simply put, these wedges perform just as well as any major OEM at 1/3 of the price. Put all that together, BUTTA!
- Monday, July 01, 2013
Reviewed By: Brian
Probably have played close to 10 rounds with the 60 so far which is my wedge of choice under 90 or so yards. Very much exceeded my expectations.
Used a True Temper DGS300 for the shaft - tipped to 8-iron flex. Basically this is the wedge flex used by most companies. Absolutely perfect balance. The grind is the best I've encountered so far. Can lay the blade totally flat, but never feel like it will excessively dig on full shots. Stopping power is great. Works good out of the sand as well. The finish is impeccable with no blemishes showing after quite a few shots. Still can't believe it only cost about $60 to build the club.
I've been using Callaway X-Forged for the last 3 years or so and these are without a doubt much better. Are they as good as Vokey's? Not sure, but they meet all of my requirements. I can change the head out once a season and keep the shaft for only $35 and 5 minutes of time if the grooves get worn. Kudos to Maltby for the design.
- Tuesday, May 28, 2013
Reviewed By: Ed Wade
(Sterling Heights, Michigan)
Bought all three heads 52, 56, and 60. Put the KBS C-Taper tipped to a 4.5 frequency. I love the feel and performance. The grind allows me to pick the ball very clean on tight lie's. The bounce on the 56 degree works well in most sand. I'm very happy with the finished product.Read More Reviews