SEARCH Search GolfWorks
BRAND
  GolfWorks Canada | Online Catalog | Find the Right Golf Shaft Become a Fan of the GolfWorks
Tapered Tip Iron Ferrules . .355"



Tapered Tip Iron Ferrules . .355"

Tell a Friend about this item

Product Name Price Status Qty
65TI Dozen - Black Std .355" Iron Ferrule $2.49 In Stock
65TI Single - Black Std .355" Iron Ferrule $0.35 In Stock
66TI Dozen - Black Long .355" Iron Ferrule $2.49 In Stock
66TI Single - Black Long .355" Iron Ferrule $0.35 In Stock
67TI Dozen - Black X-Long .355" Iron Ferrule $2.49 In Stock
67TI Single - Black X-Long 67TI .355" Iron Ferrule $0.35 In Stock
75TI Dozen - Black/Chrome Long .355" Iron Ferrule $3.99 In Stock
75TI Single - Black/Chrome Long .355" Iron Ferrule $0.50 In Stock
76TI Dozen - Black/Gold Long .355" Iron Ferrule $3.99 In Stock
76TI Single - Black/Gold Long .355" Iron Ferrule $0.50 In Stock
Dozen Rubber O-Rings $2.25 In Stock
Single Rubber O-Ring $0.35 In Stock

  • Product Description
  • Reviews
  • Questions & Answers
Tapered Tip Iron Ferrules . .355"
HUGE?FERRULE?SELECTION! A complete selection of ferrules with modern outside diameters that match perfectly to the outside diameter of our hosels. All ferrules have a 19° countersink which allows a cushion of epoxy to form between the top of the hosel and the inside of the ferrule, strengthening the bond. Each ferrule also is “pre-washed,” arriving at your shop with a high-gloss finish and no need for an acetone wipe to make it shine!Choose iron ferrules from standard to XX-long lengths. Available as single ferrules or buy ferrules by the dozen.


 
AccessDeniedAccess Denied70666B6572A9D0EAVrSKqyGVEb42/7rwfzuwT1u1FaGA1Ww9DTYSHjYaM6q4K31Fpck9Nd12yn/yofoJtWniFpFZ5/Q=
 

Do the .355 ferrules like the 67TI fit flush to the hosel or does it need to be filed or sanded down?

Asked by: gary3aces
typically the outside diameter of the ferrule will need to be sanded to match the OD of the hosel
Answered by: Kevin F
Date published: 2015-03-27

Do you carry a 1 1/4" long .355 ferrule for a Cleveland 588 RTX CB wedge with a graphite shaft?

Asked by: gary3aces
The 67TI tapered ferrule is the longest ferrule we carry at 1". It will work perfectly with the Cleveland wedges.
Answered by: Admin
Date published: 2015-03-27

Yes, I'm looking for a ferrule that will fit a Taylormade 50 degree Speedblade gap wedge. Can you narrow my choices? Thanks

Asked by: hook586
The Speedblade irons have a .370 hosel diameter. The 70PI ferrules would be the best option for a replacement ferrule.
Answered by: Admin
Date published: 2015-03-06

I am rebuilding a set of 695 CB Titleist irons. ?They are a taper tip shaft but Titleist is know for having a smaller head where the ferrul butts up than the standard ferrule. ? Do you carry any Ferrules that are an OEM fit without requiring manipulation?

Asked by: Chuck R G
Ferrules will always run a little larger then the outside diameter of the hosel. It is basically impossible to get them to fit perfect without having to do some sizing and finishing. Due do hand polishing and finishing hosels are not always the same diameter or round. I like to use .370" parallel tip ferrules with taper tip shafts especially in a case like you have here. Taper tip shafts have tapered out to approximately .370" where the shaft exists the top of the iron hosel so the parallel tip ferrules will fit and they fit closer to the outside diameter of the hosels better. I would use the 61PI for these Titleist irons. http://www.golfworks.com/product.asp_Q_pn_E_60PI
Answered by: JimY
Date published: 2015-02-09
  • 2015-04-02T07:33CST
  • bvseo_cps, prod_bvqa, vn_cps_3.1.1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_4
  • loc_en_US, sid_65TIS, PRD, sort_recentAnswersFirst
  • clientName_golfworks